# changelog

author: Petr Lautrbach <plautrba@redhat.com> 6.2p1-2 + 0.9.3-4
changelog:
  - keep track of which IndentityFile options were manually supplied and
    which were default options, and don't warn if the latter are missing.
    (mindrot#2084)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p1-3 + 0.9.3-4
changelog:
  - sshd.service: use KillMode=process (#890376)
  - add latest config.{sub,guess} to support aarch64 (#926284)


author: Petr Lautrbach <plautrba@redhat.com> 6.2p2-4 + 0.9.3-5
changelog:
  - don't show Success for EAI_SYSTEM (#985964)
  - make sftp's libedit interface marginally multibyte aware (#841771)


author: Kyle McMartin <kyle@redhat.com> 1.0.1e-21
changelog:
  - [arm] use elf auxv to figure out armcap.c instead of playing silly
    games with SIGILL handlers. (#1006474)


author: Tomáš Mráz <tmraz@redhat.com> 1.0.1e-26
changelog:
  - make DTLS1 work in FIPS mode
  - avoid RSA and DSA 512 bits and Whirlpool in 'openssl speed' in FIPS mode


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-3
changelog:
  - Ikev2 changes from rhel6 to fedora
  - Sha256 changes from rhel6 to fedora
  - Fixed 384/512 changes from rhel6 to fedora
  - Ported cisco-openswan interop changes in aggresive/main mode
  - Labeld-ipsec fixes
  - aes-gcm fixes in ikev1 mode
  - updown netkey script changes related to updating/removing 
    interface ip address and routes
  - Fixes related to rhbz 609343
  - Fixes related to rhbz 831676


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-4
changelog:
  - Phase15 as xauth and modecfg is called in openswan is not
    handled properly when only xauth (without modecfg) is used.
  - dpd events and ike/sa lifetime expiry events are not created
    properly when xauth is used without modecfg.
    This commit addresses these issues.


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-5
changelog:
  - rhbz #771612: ipsec barf should not grep sparse file. The 
  patch has been provided by pwouters@redhat.com.
  - rhbz #785180: openswan uses ifconfig which is deprecated.
  - rhbz #796683: Compile time no-strict-aliasing issue.
  - rhbz #834396: Coverity scan fixes, warnings, dead code.
  - rhbz #834400: NAT-OA reserved field issue.


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-6
changelog:
  - Fixed ipsec verify to avoid perl and use python instead. It helps
    during minimum install so that openswan does not have to pull perl
    packages, and it keeps minimal install really minimum. Also
    Removed compilation of ipsec policy subprogram as it is not
    needed with NETKEY. This patch has been provided by pwouters.


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-7
changelog:
  - redhat #820143: systemd support for openswan pluto daemon.
  - Made changes to spec file to support systemd service support.
  - Updated README.nss to remove unnecessary configuration parameters
    that are not required by default and are network topology specific.


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-8
changelog:
  - Lot of clean up of spec file, removing unnecessary stuff and 
    fixing ordering of sections. Hopefully making it more readable now.
  - Fixed /var/run/pluto error as it was installed by the package, so
    there is no need to create it inside spec file.
  - Fixed pluto run time error related to missing directories in 
    /etc/ipsec.d/ directory.


author: Avesh Agarwal <avagarwa@redhat.com> - 2.6.38-10
changelog:
  - 848132: dpd issue
  - 884556: Fixed relro issue as it was done incorrectly upstream.
    -DPIE was missing so fixed it now. Removed RAEDME.Fedora
     from doc as it is not relevant.
  - 833910: Enabled labeled ipsec
  - fixed zeroization of a message during IKEv2 exchange that
    was missed from rhel merge.
  - fixed a bad commit from openswan upstream that caused ikev2
    crashes and left it unusable.
  - Incorrect unbound changes caused restore resolveconf failures,
    which has been fixed now.


author: Will Cohen <wcohen@redhat.com> - 0.9.7-3
changelog:
  - Use correct macros for /etc and /user/share. rhbz #226222
  - Consistently use macros for buildroot.
  - Preserve timestamp for installed files.
  - Remove the clean section.
  - Fix the source location.
  - Remove unneeded BuildRequires: binutils-devel
  - Remove unneeded depends.
  - Correct Buildreq to java-1.7.0-openjdk-devel.
  - Fix macro-in-comment and macro-in-changelog
  - Remove '.' from Summary lines
  - Correct license GPLv2+ and LGPLv2+.
  - Do not remove oprofile user or group.


author: Christoph Wickert <cwickert@fedoraproject.org> - 4.8.3-1
changelog:
  - Update to 4.8.3
  - Remove the icon hack, orage now ships it's own
  - Drop obsolete BR on startup-notification-devel
  - Add VCS key


author: Hedayat Vatankhah <hedayat.fwd+rpmchlog@gmail.com> - 1.53-3
changelog:
  - Consider usrmoved distribtions in fallback linux detector (bug #826754)
  - Remove patch backup files from final rpm package (by not creating a backup!)


author: Hedayat Vatankhah <hedayat.fwd+rpmchlog@gmail.com> - 1.57-1
changelog:
  - Update to 1.57 (#890409)
  - Use shell string processing rather than 'basename' (#875356)
  - Make it possible to disable logging debug messages by assigning a value to
    OS_PROBER_DISABLE_DEBUG environment variable (Gene Czarcinski) (#893997).
  - Detect multi btrfs pools/volumes (Gene Czarcinski) (#888341)


author: Hedayat Vatankhah <hedayat.fwd+rpmchlog@gmail.com> - 1.57-2
changelog:
  - Fix a bug in recent btrfs patch when an extended partition is examined. 
    (H.J. Lu) (bug #906847)
  - Fix naming of /boot partitions according to their fstab entry (bug #893472)
  - Don't generate .btrfsfix files which will be included in final rpm
  - Fix wrong boot partition set by linux-boot-prober when / and /boot are
    mounted (bug #906886)
  - Factor out 'logger', so that it is run once and logs are piped to it (John
    Reiser) (bug #875356)


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.2.10-2
changelog:
  - BR gtkhtml2-devel for contacts (#644169)
  - BR libtar for backup feature
  - Add patch for aplay and require alsa-utils


author: Adam Williamson <awilliam@redhat.com> - 0.2.12-0.1.svn924
changelog:
  - bump to current svn to get webkit support plus many other fixes
  - build against webkit instead of gtkhtml2, which doesn't exist any more
  - fix BR: libtar-devel, not libtar
  - drop libnotify-0.7.0.patch (upstream is now version-agnostic)
  - rediff configure.patch to apply to configure.ac so it works with
    snapshots


author: Adam Williamson <awilliam@redhat.com> - 0.2.12-0.2.svn924
changelog:
  - rescue the NEVR from people using scripts
  - drop syncml plugin - libsyncml has been dead for two years and is
    currently not installable
  - configure.patch: don't pass -Wall to automake, as there are warnings
    from src/Makefile.am and po/Makefile.am with current autotools


author: Peter Gordon <peter@thecodergeek.com> - 0.4.2-11
changelog:
  - Remove static libraries (%_libdir/*.a).
  - Fix %defattr lines in the %files listings.
  - Lots of formatting/aesthetic fixes.
  - Remove pkgconfig from build-time dependencies (required by glib2-devel and
    libxml2-devel).
  - Add LDFLAGS to fix shared library linking: libots-1.so.0 needs to link to
    glib2 and libxml2 libraries to fix unresolved symbol errors. (Resolves bug
    - Split off libs subpackage to avoid potential multilib conflicts.


author: Rex Dieter <rdieter@fedoraproject.org> 1.1.1-2
changelog:
  - workaround anaconda main menu not visible in F18 Beta TC2 KDE Live (#864058)
  - -DENABLE_INNER_SHADOWS_HACK=0


author: Richard Hughes <rhughes@redhat.com> - 0.8.8-1
changelog:
  - New upstream release
  - PackageKit now allow local active users to install signed software without
    prompting for authentication. If you need to change this you will need to
    either install a PolicyKit override or just patch the policy file.
  - Added Provides property to retrieve which Provides the backend supports
  - Allow clients to call org.freedesktop.DBus.Peer
  - browser-plugin: Do not crash when running an installed package that is upgradable
  - Do not install the bash-completion code in /etc
  - Do not use _UTF8Writer when using python3
  - Don't abort the daemon if the client requests a property that does not exist
  - Don't use the default main context in sync PkClient methods
  - Expose the transaction flags on the .Transaction object
  - Pause for 10 seconds if an error occurred before restarting systemd-updates
  - Remove the prepared-updates file if any relevant state was changed
  - Support getting the distro-id from /etc/os-release
  - Use PIE to better secure installed tools and also use full RELRO in the daemon
  - Use the correct session method to fix font installation in pk-gtk-module
  - Write a pre-failure status file in case the update transaction crashes
  - yum: Ensure conf.cache is set before repo.cache is created
  - yum: Ignore errors when removing packages to work out the requires list
  - zif: Do not issue a critical warning when doing WhatProvides
  - zif: Use the same speedup used in libzif upstream


author: Richard Hughes <rhughes@redhat.com> - 0.8.9-1
changelog:
  - New upstream release
  - Add 'pkcon backend-details' to be get details of the selected backend
  - Do not rely on Python2 to write UTF-8 strings
  - Update the comps->group mapping for Fedora 19
  - When converting to unicode special case YumBaseError


author: Richard Hughes <rhughes@redhat.com> - 0.8.9-3
changelog:
  - Backport 2 fixes from master to increase the maximum number of packages that
    can be processed, and also to fix a race in the offline updates feature.


author: Richard Hughes <rhughes@redhat.com> - 0.8.9-5
changelog:
  - Backport another fix from master to fix the passwordless install for users
    in wheel group only bug.
  - Resolves: #975214


author: Richard Hughes <richard@hughsie.com> 0.8.7-1
changelog:
  - New upstream release
  - Add back the destroy() signal
  - Make our package spliters static
  - Make sure we waitForFinishe() when getting the TransactionList
  - Only call Cancel() if the transaction proxy exist
  - The full namespace is needed for a slot to be called
  - Workaround Qt bug not contructing default values when the call fails


author: Richard Hughes <richard@hughsie.com> 0.8.8-1
changelog:
  - New upstream release
  - Adding Provides property to Daemon
  - Adding some Meta information
  - Add missing declare enums
  - Adds the transactionFlags to the Transaction class
  - Add TransactionFlags registration
  - Fix searchGroups() be iterating over the flaged values
  - Ignore Interface isValid() check
  - Implement connectNotify and disconnectNotify
  - Improve error handling and make it easier for QML use it
  - Make sure we set an error if we fail to contact PackageKit


author: Tom Lane <tgl@redhat.com> 3.8.1-1
changelog:
  - Created package by stripping down postgresql specfile and adjusting
    to meet current packaging guidelines for python modules.


author: Tom Lane <tgl@redhat.com> 3.8.1-2
changelog:
  - Fix License tag and permissions on example scripts under tutorial/,
    per discussion in package review request.
  Related: #452321


author: Tom Lane <tgl@redhat.com> 4.0-1
changelog:
  - Update to PyGreSQL 4.0
  - Relabel license as PostgreSQL now that that's separately recognized by OSI.


author: Rex Dieter <rdieter@fedoraproject.org> 4.10.1-2
changelog:
  - filter private shared objects
  - %{python_sitelib}/dbus/mainloop/qt.so should be in %python_sitearch (#957260)
  - .spec cleanup
  - -assistant subpkg


author: Stef Walter <stefw@redhat.com> - 0.17.5-1
changelog:
  - Make 'p11-kit extract-trust' call update-ca-trust
  - Work around 32-bit oveflow of certificate dates
  - Build fixes


author: Stef Walter <stefw@redhat.com> - 0.18.0-1
changelog:
  - Update to new upstream stable release
  - Various logging tweaks (#928914, #928750)
  - Make the 'p11-kit extract-trust' explicitly reject
    additional arguments


author: Stef Walter <stefw@redhat.com> - 0.18.3-1
changelog:
  - Update to new upstream stable release
  - Fix intermittent firefox cert validation issues (#960230)
  - Include the manual pages in the package


author: Stef Walter <stefw@redhat.com> - 0.18.5-1
changelog:
  - Update to new upstream point release
  - Use freebl for hash algorithms
  - Don't load configs in home dir when setuid or setgid
  - Use $TMPDIR instead of $TEMP while testing
  - Open files and fds with O_CLOEXEC
  - Abort initialization if critical module fails to load
  - Don't use thread-unsafe: strerror, getpwuid
  - Fix p11_kit_space_strlen() result when empty string


author: Matthias Saou <matthias@saou.eu> 9.20.1-1
changelog:
  - Update to 9.20.1 (#688564).
  - Update norar, nostrip and install patches.
  - Minor clean ups : Don't use trivial macros + new email address.
  - Don't require the main package from the plugins package (#690551).
  - Use the any_cpu_gcc_4.X makefile for ppc* since the ppc specific one is gone.


author: Naveen Kumar <nkumar@redhat.com> - 3.0-8
changelog:
  - add ur-in, ur-pk & pa-pk locale-specific overrides rule in 67-paktype-naskh-basic.conf
  - add ur-in, ur-pk & pa-pk locale-specific overrides rule in 67-paktype-naskh-basic-sa.conf
  - resolves bug #586789


author: Tomáš Mráz <tmraz@redhat.com> 1.1.6-9
changelog:
  - do not fail if btmp file is corrupted (#906852)
  - fix strict aliasing warnings in build
  - UsrMove
  - use authtok_type with pam_pwquality in system-auth
  - remove manual_context handling from pam_selinux (#876976)
  - other minor specfile cleanups


author: Tomáš Mráz <tmraz@redhat.com> 1.1.6-12
changelog:
  - add auditing of SELinux policy violation in pam_rootok (#965723)
  - add SELinux helper to pam_pwhistory


author: Nalin Dahyabhai <nalin@redhat.com> - 2.3.97-1
changelog:
  - update to 2.3.97
    - fix the order of credentials in a user ccache looking wrong
    - in the ticket manipulation helper, if we're trying to switch IDs and
      can't, if we should be able to do so, flag an error


author: Nalin Dahyabhai <nalin@redhat.com> - 2.4.2-1
changelog:
  - update to 2.4.2
    - don't override the primary ccache selection when updating DIR: caches
    - handle the signature of trace callbacks being different between 1.10 and
      1.11


author: Nalin Dahyabhai <nalin@redhat.com> - 2.4.5-1
changelog:
  - update to 2.4.5
    - handle non-unique ccname templates
  - switch to a non-unique default ccname template on newer releases


author: Nalin Dahyabhai <nalin@redhat.com> - 2.4.6-1
changelog:
  - handle ccache creation correctly for users who are mapped to principal
    names in realms other than the default (#999604)


author: Bob Relyea <rrelyea@redhat.com> - 0.6.2-1
changelog:
  - Pick up the latest pam_pkcs11 from upstream

  - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild


author: Michel Salim <salimma@fedoraproject.org> - 0.9.10-1
changelog:
  - Incorporate changes from Julian Sikorski (belegdol) (#827764):
    * update to 0.9.10
    * update URL and source fields; switch to xz tarball
    * drop obsoleted Group, Buildroot, %clean and %defattr
  - Further spec clean-ups (buildroot-cleanup-on-install, indentation)
  - Hard-coded dependency on build-time PulseAudio version dropped


author: Akira TAGOH <tagoh@redhat.com> - 0.6.8-23
changelog:
  - the spec file cleanup
  - Fix the undefined symbol issue in libpaps.so.0
  - Correct FSF address in the COPYING.LIB


author: Brian C. Lane <bcl@redhat.com> 3.1-6
changelog:
  - Use dm_udev_wait for dm operations (#844257) (bcl)
  - use largest_partnum in _dm_reread_part_table (bcl)
  - set uuid on dm partitions (#832145) (bcl)


author: Brian C. Lane <bcl@redhat.com> 3.1-8
changelog:
  - change partition UUID to use partX-UUID (#858704)
  - fixup losetup usage in tests
  - add support for implicit FBA DASD partitions (#707027)
  - add support for EAV DASD partitions (#707032)


author: Brian C. Lane <bcl@redhat.com> 3.1-10
changelog:
  - libparted: mklabel to support EAV DASD (#707032)
  - libparted: Avoid dasd as default disk type while probe (#707032)


author: Tomas Mraz <tmraz@redhat.com> 0.77-5
changelog:
  - first part of fix for pam_gnome_keyring prompting (#578624)
    needs support for use_authtok to be added to pam_gnome_keyring


author: Tomas Mraz <tmraz@redhat.com> 0.78.99-1
changelog:
  - use better (auditable) libselinux calls for checking
    the access to passwd (#518268)
  - add support for the -e option as seen on Debian passwd
  - make the binary PIE and full RELRO (#784483)


author: Avesh Agarwal <avagarwa@redhat.com> - 1.0.5-4
changelog:
  - Patch for new configurable options(rhbz# 219201): 
    disable first upper and last digit check, passwords 
    prompts can be read from a file


author: Avesh Agarwal <avagarwa@redhat.com> - 1.0.5-5
changelog:
  - Fixed an issue with spec file where "Release:" is not
    specified with "(?dist)". Without this, it gives problem
    when tagging across different fedora releases.


author: Avesh Agarwal <avagarwa@redhat.com> - 1.0.5-6
changelog:
  - Fixed following rpmlint errors on src rpm:
    pam_passwdqc.src: W: summary-ended-with-dot Pluggable
    password quality-control module.,
    pam_passwdqc.src:11: E: buildprereq-use pam-devel


author: Avesh Agarwal <avagarwa@redhat.com> - 1.0.5-7
changelog:
  - Fixed issues as per bz 226226, patch by Parag (panemade@gmail.com).
  - Added explanation for extra C flags as per fedora guidelines.


author: Avesh Agarwal <avagarwa@redhat.com> - 1.2.2-1
changelog:
  - New upstream release with package name changed to passwdqc
  - Added new command line utilities pwqcheck and pwqgen
  - Addition of passwdqc.conf file in /etc
  - Added libpasswdqc library and header files for buliding applications
  - This is an initial release of passwdqc.


author: Tim Waugh <twaugh@redhat.com> 2.7-1
changelog:
  - 2.7.  No longer need sigsegv, get-arg, CVE-2010-4651,
    backup-if-mismatch or coverity-leak patches.


author: Julian Sikorski <belegdol@fedoraproject.org> - 1.0-1
changelog:
  - Updated to 1.0
  - Switched to .xz sources
  - Dropped obsolete Group, Buildroot, %clean and %defattr
  - Updated Source0 and URL
  - Switched to gtk3


author: Julian Sikorski <belegdol@fedoraproject.org> - 2.0-1
changelog:
  - Updated to 2.0
  - Made the make calls verbose
  - Dropped explicit pulsaudio-libs dependency
  - Updated the version in the pulseaudio-libs-devel BR


author: Mamoru TASAKA <mtasaka@fedoraproject.org> - 1.1.0-2
changelog:
  - Add workaround for tab too small with GTK3
    (bug 922729, pcmanfm-Bugs-3602000)
  - Add workaround for pcmanfm --help showing garbage message
    (pcmanfm-Bugs-3607427)


author: Mamoru TASAKA <mtasaka@fedoraproject.org> - 1.1.2-2.D20130830gitfc8adaab77
changelog:
  - Use git head to fix desktop background issue after
    pcmanfm exit
  - Also remove old mimetype (ref: bug 988831)


author: Petr Pisar <ppisar@redhat.com> - 8.32-4
changelog:
  - Fix forward search in JIT when link size is 3 or greater
  - Fix buffer over-read in UTF-16 and UTF-32 modes with JIT


author: Petr Pisar <ppisar@redhat.com> - 8.32-5
changelog:
  - Fix bad handling of empty lines in pcregrep tool (bug #961789)
  - Fix possible pcretest crash with a data line longer than 65536 bytes


author: Kalev Lember <kalevlember@gmail.com> - 1.8.2-1
changelog:
  - Update to 1.8.2
  - Drop the systemd support patches which are now upstreamed
  - Package the new pcsc-spay tool in -devel subpackage


author: Kalev Lember <kalevlember@gmail.com> - 1.4.5-1
changelog:
  - Update to 1.4.5
  - Switch to systemctl for restarting pcscd after upgrade now that it is using
    native systemd unit files.


author: Petr Pisar <ppisar@redhat.com> - 4:5.16.2-256
changelog:
  - Sub-package File-CheckTree (bug #909144)
  - Sub-package Text-ParseWords
  - Sub-package Encode (bug #859149)


author: Petr Pisar <ppisar@redhat.com> - 4:5.16.3-261
changelog:
  - 5.16.3 bump (see <http://search.cpan.org/dist/perl-5.16.3/pod/perldelta.pod>
    for release notes)
  - Remove bundled autodie, B-Lint, CPANPLUS, Encode, File-CheckTree, IPC-Cmd,
    Params-Check, Text-Soundex, Thread-Queue


author: Petr Pisar <ppisar@redhat.com> - 4:5.16.3-262
changelog:
  - Correct dependencies of perl-HTTP-Tiny
  - Correct perl-Digest-MD5 dependencies
  - Remove bundled Archive-Extract, Module-Load-Conditional, Pod-LaTeX
  - Conflict perl-autodie with older perl (bug #911226)
  - Filter provides from *.pl files (bug #924938)
  - Sub-package Sys-Syslog (bug #950057)
  - Fix leaking tied hashes (bug #859910)
  - Fix dead lock in PerlIO after fork from thread (bug #947444)
  - Add proper conflicts to perl-Sys-Syslog


author: Petr Pisar <ppisar@redhat.com> - 4:5.16.3-265
changelog:
  - Move CPANPLUS-Dist-Build files from perl-CPANPLUS
  - Move CPAN-Meta-Requirements files from CPAN-Meta
  - Add perl-Scalar-List-Utils to perl-core dependencies
  - Do not distribute File::Spec::VMS (bug #973713)
  - Remove bundled CPANPLUS-Dist-Build (bug #973041)


author: Nicolas Chauvet <kwizart@gmail.com> - 6.14-2
changelog:
  - Filter requires perl(FLTK) perl(Cocoa) - rhbz#815496
  - Filter perl(IO::Async::Loop) to reintroduce later.
  - Remove filter on perl(AnyEvent::Impl::Qt) since there is perl(Qt)


author: Paul Howarth <paul@city-fan.org> - 7.0-1
changelog:
  - Update to 7.0
  - Package generates no debuginfo, so avoid creation of debuginfo sub-package
  - Add explicit build requirements for the module's needs
  - Add build requirements for as much event loop testing as is possible in
    Fedora, breaking potential build dependency cycles by use of the
    %{perl_bootstrap} macro
  - Clean up spec for modern rpmbuild:
    - Drop %defattr, redundant since rpm 4.4
    - Use DESTDIR rather than PERL_INSTALL_ROOT
    - Drop buildroot definition and cleaning
    - Drop requires/provides filters for rpm versions prior to 4.9
  - Simplify requires/provides filtering
  - Explicitly require perl(Task::Weaken) as per upstream recommendation


author: Paul Howarth <paul@city-fan.org> - 7.01-1
changelog:
  - Update to 7.01:
    - Fail with EPROTO in AnyEvent::Handle when TLS is requested but not
      available, instead of throwing an exception
    - Use File::Spec to get the tmpdir in t/*, to avoid needless failures on
      (most, not mine :) windows boxes
    - New handle read types: tls_detect and tls_autostart
  - BR: perl(File::Spec)


author: Paul Howarth <paul@city-fan.org> - 7.02-1
changelog:
  - Update to 7.02:
    - AnyEvent::Util::run_cmd could block indefinitely
    - Verified that AnyEvent::Socket follows RFC5952
    - Try to parse "ADDR#PORT" in addition to "ADDR PORT"
  - Make %files list more explicit


author: Paul Howarth <paul@city-fan.org> - 7.04-1
changelog:
  - Update to 7.04:
    - AnyEvent::Socket::inet_aton did not work when DNS resolution was used to
      find the addresses
    - Fix a memory leak in the /etc/hosts lookup code when hosts don't resolve
      and are not in hosts


author: Paul Howarth <paul@city-fan.org> - 0.09-1
changelog:
  - Update to 0.09 (improve distribution metadata)
  - Run release tests too
  - BR: perl(Pod::Coverage::TrustPod), perl(Test::Pod) and
    perl(Test::Pod::Coverage) for release tests
  - Spec clean-up:
    - Make %files list more explicit
    - Use DESTDIR rather than PERL_INSTALL_ROOT
    - Use tabs
    - Split buildreqs by Build/Module/Tests/Release tests


author: Paul Howarth <paul@city-fan.org> - 0.10-1
changelog:
  - Update to 0.10 (stop propagating our magic through localisation)
  - Package LICENSE file
  - Downgrade ExtUtils::MakeMaker version requirement to 6.30
  - Upgrade Test::More version requirement to 0.89
  - Drop Test::Pod version requirement for EPEL-6 spec compatibility
  - BR: perl(Test::EOL) and perl(Test::NoTabs) for additional test coverage
  - Clean up for modern rpmbuild since we have no branches prior to EPEL-6
    - Don't specify BuildRoot:
    - Skip cleaning of buildroot in %install
    - Remove %clean section
    - Drop redundant %defattr
  - Remove shellbangs from tests to placate rpmlint


author: Paul Howarth <paul@city-fan.org> - 0.11-1
changelog:
  - Update to 0.11 (a minor efficiency improvement)
  - Bump perl(Variable::Magic) version requirement to 0.48


author: Paul Howarth <paul@city-fan.org> - 0.12-1
changelog:
  - Update to 0.12
    - Complete pure-perl implementation in addition to the one based on
      Variable::Magic; you can specify the implementation explicitly by use-ing
      B::Hooks::EndOfScope::PP or B::Hooks::EndOfScope::XS, or by setting
      $ENV{B_HOOKS_ENDOFSCOPE_IMPLEMENTATION} to either 'XS' or 'PP'
    - Switch from using Sub::Exporter to the more conservative
      Sub::Exporter::Progressive
  - Add patch to fix POD coverage issues in new pure-perl implementation
  - This release by BOBTFISH -> update source URL
  - BR: perl(ExtUtils::CBuilder) ≥ 0.26, perl(Devel::Hide) ≥ 0.0007,
    perl(Module::Implementation) ≥ 0.05 and perl(Module::Runtime) ≥ 0.012
  - BR: perl(Sub::Exporter::Progressive) rather than perl(Sub::Exporter)
  - BR: perl(base), perl(constant), perl(Hash::Util::FieldHash) and
    perl(Scalar::Util) for the pure-perl implementation


author: Paul Howarth <paul@city-fan.org> - 2.05.03-3
changelog:
  - Don't BR: perl(LWP::Simple) for optional tests when bootstrapping; this is a
    cleaner fix than nobbling perl-URI's runtime dependencies


author: Paul Howarth <paul@city-fan.org> - 20081208-8
changelog:
  - Clean up for modern rpmbuild:
    - Drop BuildRoot specification
    - Drop %clean section
    - Don't bother cleaning buildroot in %install section
    - Make %files list more explicit
    - Use DESTDIR rather than PERL_INSTALL_ROOT
    - Use %{_fixperms} macro rather than our own chmod incantation
    - Replace provides filter with version that works with rpm ≥ 4.9
  - Include tests as %doc since they're referred to by examples/README


author: Paul Howarth <paul@city-fan.org> - 20120719-1
changelog:
  - Update to 20120719:
    - Support using data from RangeMessage.xml, so you can use the latest data
      from ISBN without updating this module
  - Fix shellbang and permissions of make_data.pl script to placate rpmlint
  - Filter dependency on perl(LWP::Simple), required only by make_data.pl script,
    not in normal operation
  - Don't need to remove empty directories from the buildroot
  - BR: perl(Carp), perl(File::Spec::Functions) and perl(Test::Manifest) ≥ 1.14
  - BR: at least version 1.00 of perl(Test::Pod)


author: Paul Howarth <paul@city-fan.org> - 20120719.001-1
changelog:
  - Update to 20120719.001:
    - Require Test::More ≥ 0.95 for subtest support
    - No code or feature changes
  - Bump Test::Manifest version requirement to 1.21
  - Bump Test::More version requirement to 0.95
  - Drop redundant buildreq perl(Test::Prereq)


author: Paul Howarth <paul@city-fan.org> - 0.008-7
changelog:
  - Run the extra tests in a separate test run, and only when not bootstrapping
  - Don't BR: perl(Test::Spelling) with RHEL ≥ 7 as we don't have the other
    dependencies needed do the spell check test


author: Paul Howarth <paul@city-fan.org> - 0.008-12
changelog:
  - Never BR: perl(Test::Version) for EL builds as perl(version) is too old
    prior to EL-7 and this package is included in RHEL ≥ 7 but Test::Version
    is only in EPEL


author: Petr Pisar <ppisar@redhat.com> 1.22-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Remove BuildRoot and defattr code from spec
  - Do not export private module DB


author: Paul Howarth <paul@city-fan.org> - 0.19-1
changelog:
  - Update to 0.19 (no functional changes)
  - This release by DOY -> update source URL
  - BR: perl(Exporter)
  - Don't need to remove empty directories from buildroot


author: Paul Howarth <paul@city-fan.org> - 0.19-7
changelog:
  - New upstream re-release of 0.19 by DROLSKY
    - The load_class() subroutine now returns the class name on success
      (CPAN RT#76931)
    - Exceptions and errors from Class::Load no longer contain references to line
      numbers in Class::Load or Module::Runtime; this applies to exceptions
      thrown by load_class, load_first_existing_class, and load_optional_class,
      as well as the error returned by try_load_class
    - Exceptions are now croaked properly so they appear to come from the calling
      code, not from an internal subroutine; this makes the exceptions look more
      like the ones thrown by Perl's require (CPAN RT#68663)
  - This release by DROLSKY -> update source URL
  - BR: perl(Scalar::Util) for the module
  - BR: perl(lib) for the test suite
  - Drop buildreqs perl(strict) and perl(warnings) - not dual-lived


author: Paul Howarth <paul@city-fan.org> - 2.055-1
changelog:
  - Update to 2.055
    - Fix misuse of magic in API (CPAN RT#78080)
  - Drop redundant explicit requires for perl(Exporter) and perl(File::Temp)


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - Compress::Raw::Bzip2 needs to use PERL_NO_GET_CONTEXT (CPAN RT#80318)
    - Install to 'site' instead of 'perl' when perl version is 5.11+
      (CPAN RT#79811)
    - Update to ppport.h that includes SvPV_nomg_nolen (CPAN RT#78080)


author: Paul Howarth <paul@city-fan.org> - 2.055-1
changelog:
  - Update to 2.055
    - Fix misuse of magic in API (CPAN RT#78079)
    - Include zlib 1.2.7 source
  - BR: perl(Exporter) and perl(lib)
  - BR: perl(Test::NoWarnings) except when bootstrapping
  - Drop redundant explicit require for perl(Exporter)
  - Drop BR: perl(bytes), not dual-lived


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - Compress::Raw::Zlib needs to use PERL_NO_GET_CONTEXT (CPAN RT#80319)
    - Install to 'site' instead of 'perl' when perl version is 5.11+
      (CPAN RT#79812)
    - Update to ppport.h that includes SvPV_nomg_nolen (CPAN RT#78079)


author: Marcela Mašláňová <mmaslano@redhat.com> 1.34-1
changelog:
  - update by Fedora::App::MaintainerTools 0.006
  - updating to latest GA CPAN version (1.34)
  - replaced old BR on perl(Test::Simple) with Test::More
  - added a new req on perl(DBI) (version 1.21)


author: Marcela Mašláňová <mmaslano@redhat.com> - 2.135.07-240
changelog:
  - update the version to override the module from perl.srpm
  - bump release to override sub-package from perl.spec


author: Paul Howarth <paul@city-fan.org> - 0.107-3
changelog:
  - package LICENSE file
  - run test suite even when bootstrapping, as it should still pass
  - run release tests too
  - enhance %description so it makes sense
  - BR: perl(Test::More)


author: Paul Howarth <paul@city-fan.org> - 0.107-4
changelog:
  - drop -tests subpackage (general lack of interest in this), but include
    them as documentation for the main package
  - drop redundant %{?perl_default_filter}
  - don't use macros for commands
  - can't find any dependency cycle so drop %{?perl_bootstrap} usage
  - drop ExtUtils::MakeMaker version requirement to 6.30, actual working minimum


author: Iain Arnell <iarnell@gmail.com> 2:0.70-1
changelog:
  - Unbundle DateTime::TimeZone and DateTime::Locale
  - Bump epoch and revert to upstream versioning
  - Specfile regenerated by cpanspec 1.78.
  - Update description


author: Paul Howarth <paul@city-fan.org> - 0.06-1
changelog:
  - Update to 0.06
    - De-retardize XS-less behavior under SpeedyCGI
    - Test suite now works from within space-containing paths
  - This release by RIBASUSHI -> update source URL


author: Paul Howarth <paul@city-fan.org> - 0.07-1
changelog:
  - Update to 0.07
    - Actually detect errors in pure-perl test
    - Add prototype to pure-perl pre-5.14 version
  - This release by FLORA -> update source URL
  - BR: perl(File::Spec), perl(File::Temp) and perl(threads)


author: Paul Howarth <paul@city-fan.org> - 0.08-1
changelog:
  - Update to 0.08
    - Switch to Sub::Exporter::Progressive
  - BR: perl(Sub::Exporter::Progressive) ≥ 0.001002 rather than plain
    perl(Sub::Exporter)


author: Paul Howarth <paul@city-fan.org> - 0.09-1
changelog:
  - Update to 0.09
    - Rewrite completely broken pure-perl GD detection under threads
    - Fix pure-perl implementation incorrectly reporting GD during END phase
  - This release by RIBASUSHI -> update source URL


author: Paul Howarth <paul@city-fan.org> - 0.10-1
changelog:
  - Update to 0.10 (#928262)
    - Rewrite pure-perl implementation in terms of B::main_start (greatly
      simplifies code)
    - Fix pure-perl behavior under $^C (CPAN RT#78619)
    - Separate XS portion into a compiler-optional dependency
      Devel::GlobalDestruction::XS
  - Bump perl(Sub::Exporter::Progressive) version requirement to 0.001006
  - Package is always noarch now
  - BR:/R: perl(Devel::GlobalDestruction::XS) with perl < 5.13.7
  - BR: perl(threads::shared) for the test suite


author: Paul Howarth <paul@city-fan.org> - 0.11-1
changelog:
  - Update to 0.11
    - Fix upgrading from version 0.09 or older
  - This release by HAARG -> update source URL


author: Mathieu Bridon <bochecha@fedoraproject.org> - 4.03-3
changelog:
  - Some more fixes as part of the review process:
    - Fix the license tag to be only the license of perl-EV, and add a note about
      the included libev sources.
  - Removed manual cleaning of the buildroot since it has been useless since
    Fedora 10 and even EPEL (>=6) doesn't need it now.


author: Mathieu Bridon <bochecha@fedoraproject.org> - 4.03-4
changelog:
  - Readded the header file to the main package, as per guidelines:
        -> http://fedoraproject.org/wiki/Packaging/Perl#.h_files_in_module_packages


author: Petr Pisar <ppisar@redhat.com> 2.47-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Make devel sub-package architecture specific due to file location


author: Paul Howarth <paul@city-fan.org> - 1:0.17020-1
changelog:
  - Update to 0.17020
    - Change to Shlomi Fish's new E-mail and web address
    - Clarify the licence of lib/Error/Simple.pm (CPAN RT#81277)
    - Correct typos (CPAN RT#85023)
  - Don't use macros for commands
  - Don't need to remove empty directories from the buildroot
  - Make %files list more explicit
  - Drop %defattr, redundant since rpm 4.4
  - Avoid provides/requires from examples


author: Iain Arnell <iarnell@gmail.com> 1.15-1
changelog:
  - update to latest upstream version
  - clean up spec for modern rpmbuild
  - filter perl(attrs) from requires


author: Paul Howarth <paul@city-fan.org> 1.20-1
changelog:
  - update to 1.20 (test suite fixes)
  - BR: perl(Carp), perl(Config), perl(Exporter)
  - since upstream doesn't ship license files, neither should we
  - make %files list more explicit
  - use a patch to fix character encoding rather than scripted iconv
  - use DESTDIR rather than PERL_INSTALL_ROOT
  - no need for additional filtering on top of %{?perl_default_filter}
  - don't package INSTALL file


author: Paul Howarth <paul@city-fan.org> - 1.21-1
changelog:
  - Update to 1.21:
    - Silence some clang warnings
      (http://www.xray.mpe.mpg.de/mailing-lists/perl5-porters/2012-12/msg00424.html)


author: Petr Pisar <ppisar@redhat.com> 6.01-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Remove BuildRoot stuff
  - Conflict with perl-libwww-perl-5* and older
  - Do not provide private modules


author: Paul Howarth <paul@city-fan.org> - 3.20-10
changelog:
  - Clean up spec file for modern rpmbuild:
    - Drop BuildRoot definition
    - Drop %defattr
    - Drop %clean section
    - Drop cleaning of buildroot in %install
    - Use DESTDIR rather than PERL_INSTALL_ROOT
    - Use %{_fixperms} macro rather than our own chmod incantation
    - Don't use macros for commands
  - Break build dependency loop by only using perl(Test::Pod) if we're not
    bootstrapping
  - BR: perl(Test::More)


author: Petr Pisar <ppisar@redhat.com> 6.00-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Remove BuildRoot stuff
  - Conflicts with perl-libwww-perl-5* and older


author: Petr Pisar <ppisar@redhat.com> 6.00-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Remove BuildRoot stuff
  - Conflict with perl-libwww-perl-5* and older


author: Paul Howarth <paul@city-fan.org> - 4.12-1
changelog:
  - Update to 4.12 (see Changes file for details)
    - INCOMPATIBLE CHANGE: fork is no longer supported (indeed, it never was);
      see FORK BEHAVIOUR in manpage for details
  - BR: perl(Carp)
  - Reinstate compatibility with old distributions such as EL-5
    - Add back BuildRoot definition and cleaning
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Don't use macros for commands
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 4.14-1
changelog:
  - Update to 4.14:
    - Fix stat structure usage on windows, which caused bogus stat results
    - (libeio) make readahead emulation behave more like actual readahead by
      never failing
    - New request aio_seek
    - New request aio_fiemap
    - Auto-generate the #ifdef/#define 0 blocks for symbols we export
  - BR:/R: Perl core modules that might be dual-lived
  - Don't need to remove empty directories from buildroot


author: Paul Howarth <paul@city-fan.org> - 4.15-1
changelog:
  - Update to 4.15:
    - Always include linux/types.h for fiemap, for compatibility with ancient
      systems
    - Experimental support for IO::AIO::splice and ::tee (no aio_...)
    - Provide SEEK_HOLE and SEEK_DATA, if available
    - Work around (again!) an immensely stupid bug in RHEL, defining autoconf
      macros in linux system headers


author: Paul Howarth <paul@city-fan.org> - 2.055-1
changelog:
  - Update to 2.055
    - FAQ: added a few paragraphs on how to deal with pbzip2 files
      (CPAN RT#77743)
    - Compress::Zip: speed up compress, uncompress, memGzip and memGunzip
      (CPAN RT#77350)
  - BR: perl(lib)
  - Drop BR: perl(Test::Builder) and perl(Test::More) as they're bundled
  - Drop BR: perl(Config), perl(Fcntl), perl(File::Copy), perl(File::Glob),
    perl(POSIX) and perl(Symbol) as they're not dual-lived
  - Drop redundant explicit require for perl(Exporter)
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 2.058-1
changelog:
  - Update to 2.058
    - IO::Compress::Zip
      - Allow member name and Zip Comment to be "0"
    - IO::Compress::Base::Common
      - Remove "-r" test - the file open will catch this
      - IO::Compress::Base::Common returned that it could not read readable files
        in NFS (CPAN RT#80855)
    - Install to 'site' instead of 'perl' when perl version is 5.11+
      (CPAN RT#79820)
    - General performance improvements
    - Fix failing 01misc.t subtest introduced in 2.057 (CPAN RT#81119)
  - Explicitly install to 'perl' directories


author: Paul Howarth <paul@city-fan.org> - 2.059-1
changelog:
  - Update to 2.059
    - IO::Compress::Base
      - Added "Encode" option (fixes the encoding half of CPAN RT#42656)


author: Paul Howarth <paul@city-fan.org> - 2.060-1
changelog:
  - Update to 2.060
    - Updated POD
      - CPAN RT#82138: Example code not clear - gunzip() takes filenames!
    - IO::Compress::Base
      - Remove the flush call when opening a filehandle


author: Paul Howarth <paul@city-fan.org> - 1.80-1
changelog:
  - Update to 1.80
    - Removed some warnings in test (missing SSL_verify_mode => 0), which caused
      tests to hang on Windows (CPAN RT#81493)


author: Paul Howarth <paul@city-fan.org> - 1.81-1
changelog:
  - Update to 1.81
    - Deprecated set_ctx_defaults; new name is set_defaults (the old name is
      still available)
    - Changed handling of default path for SSL_(ca|cert|key)* keys: if one of
      these keys is user defined, don't add defaults for the others, i.e.
      don't mix user settings and defaults
    - Cleaner handling of module defaults vs. global settings vs. socket
      specific settings; global and socket specific settings are both provided
      by the user, while module defaults are not
    - Make IO::Socket::INET6 and IO::Socket::IP specific tests both run, even
      if both modules are installed, by faking a failed load of the other module
  - BR: perl(IO::Socket::INET6) and perl(Socket6) unconditionally


author: Paul Howarth <paul@city-fan.org> - 1.82-1
changelog:
  - Update to 1.82
    - sub error sets $SSL_ERROR etc. only if there really is an error; otherwise
      it will keep the latest error, which allows IO::Socket::SSL->new to report
      the correct problem, even if the problem is deeper in the code (like in
      connect)
    - Correct spelling (CPAN RT#82790)


author: Paul Howarth <paul@city-fan.org> - 1.83-1
changelog:
  - Update to 1.83
    - Server Name Indication (SNI) support on the server side (CPAN RT#82761)
    - Reworked part of the documentation, like providing better examples


author: Paul Howarth <paul@city-fan.org> - 1.83-2
changelog:
  - Update to 1.831
    - Separated documentation of non-blocking I/O from error handling
    - Changed and documented behavior of readline to return the read data on
      EAGAIN/EWOULDBLOCK in case of non-blocking socket
      (see https://github.com/noxxi/p5-io-socket-ssl/issues/1)
  - Bumped release rather than version number to preserve likely upgrade path
    and avoid need for epoch or version number ugliness; may revisit this in
    light of upstream's future version numbering decisions


author: Paul Howarth <paul@city-fan.org> - 1.84-1
changelog:
  - Update to 1.84
    - Disabled client side SNI for openssl version < 1.0.0 because of
      CPAN RT#83289
    - Added functions can_client_sni, can_server_sni and can_npn to check
      availability of SNI and NPN features
    - Added more documentation for SNI and NPN


author: Paul Howarth <paul@city-fan.org> - 1.85-1
changelog:
  - Update to 1.85
    - Probe for available modules with local __DIE__ and __WARN__handlers
      (CPAN RT#84574)
    - Fix warning, when IO::Socket::IP is installed and inet6 support gets
      explicitly requested (CPAN RT#84619)


author: Paul Howarth <paul@city-fan.org> - 1.86-1
changelog:
  - Update to 1.86
    - Don't warn about SSL_verify_mode when re-using an existing SSL context
      (CPAN RT#84686)


author: Paul Howarth <paul@city-fan.org> - 1.87-1
changelog:
  - Update to 1.87
    - Complain if given SSL_(key|cert|ca)_(file|path) do not exist or if they are
      not readable (CPAN RT#84829)
    - Fix use of SSL_key|SSL_file objects instead of files, broken with 1.83


author: Paul Howarth <paul@city-fan.org> - 1.88-1
changelog:
  - Update to 1.88
    - Consider a value of '' the same as undef for SSL_ca_(path|file), SSL_key*
      and SSL_cert* - some apps like Net::LDAP use it that way


author: Paul Howarth <paul@city-fan.org> 2.51-1
changelog:
  - update to 2.51 (#683052)
    - import JSON::PP 2.27105 as BackportPP
    - fix documentation (CPAN RT#64738)


author: Paul Howarth <paul@city-fan.org> 2.53-1
changelog:
  - update to 2.53
    - fixed to_json (CPAN RT#68359)
    - backport JSON::PP 2.27200 (fixed incr_parse decoding string more correctly
      - CPAN RT#68032)
    - made Makefile.PL skip an installing XS question when set $ENV{PERL_ONLY} or
      $ENV{NO_XS} (CPAN RT#66820)


author: Paul Howarth <paul@city-fan.org> - 2.27200-241
changelog:
  - BR: perl(base), perl(constant) and perl(lib)
  - Install to vendor directories
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot


author: Petr Šabata <contyk@redhat.com> - 2.27200-242
changelog:
  - Correct the URL
  - Add a few missing buildtime dependencies
  - Drop Getopt::Long dep; json_pp isn't tested


author: Paul Howarth <paul@city-fan.org> - 2.27202-1
changelog:
  - Update to 2.27202
    - Fix test failures due to hash iterator randomization in perl 5.17.6 onwards
      (CPAN RT#83421)


author: Petr Pisar <ppisar@redhat.com> 6.01-1
changelog:
  - Specfile autogenerated by cpanspec 1.78.
  - Remove BuildRoot stuff
  - Conflicts with perl-libwww-perl 5* and older


author: Paul Howarth <paul@city-fan.org> - 0.33-1
changelog:
  - Update to 0.33
    - Updated can_xs to fix a bug in it
  - Reinstate compatibility with old distributions like EL-5
  - Drop Test::More version requirement to 0.42
  - BR: perl(ExtUtils::MakeMaker)
  - BR: perl(Test::LeakTrace) except on EL-4/EL-5 where it's not available
  - BR: perl(Pod::Simple), perl(Test::CPAN::Meta), perl(Test::MinimumVersion)
    (if we're not bootstrapping) and perl(Test::Pod), and run the developer tests
    too
  - Don't use macros for commands
  - Use %{_fixperms} macro rather than our own chmod incantation
  - Make %files list more specific
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.33-7
changelog:
  - BR:/R: perl(Carp)
  - BR: perl(constant), perl(Exporter) and perl(ExtUtils::CBuilder)
  - Add commentary regarding non-use of Test::LeakTrace for EL-7 builds
  - Use Test::LeakTrace for EL-5 builds
  - Drop support for EL-4 builds since it was EOL-ed ages ago
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot
  - Remove more command macros


author: Paul Howarth <paul@city-fan.org> - 0.11-9
changelog:
  - Spec clean-up:
    - Only require Class::C3 with perl < 5.9.5
    - Require Class::C3::XS for performance and consistency, but only with
      perl < 5.9.5
    - Use DESTDIR rather than PERL_INSTALL_ROOT
    - Make %files list more explicit
    - Classify buildreqs by build/module/test
    - Don't use macros for commands
    - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.12-1
changelog:
  - Update to 0.12
    - Bump Class::C3 dependency on 5.8, which in turn will automatically install
      Class::C3::XS if possible
    - Fix nonfunctional SYNOPSIS (CPAN RT#78325)
  - This release by BOBTFISH -> update source URL
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4
  - BR: perl(Cwd), perl(File::Path), perl(File::Spec) for bundled Module::Install
  - Bump perl(Class::C3) version requirement to 0.24
  - Drop unnecessary version requirement for perl(ExtUtils::MakeMaker)


author: Paul Howarth <paul@city-fan.org> - 0.03-3
changelog:
  - Incorporate feedback from package review (#788258)
    - Correct License tag, which should be Artistic 2.0
    - BR: perl(lib) for test suite
    - Explicitly require perl(Carp), not automatically detected


author: Paul Howarth <paul@city-fan.org> - 0.04-1
changelog:
  - Update to 0.04
    - This module no longer installs an _implementation() subroutine in callers;
      instead, you can call Module::Implementation::implementation_for($package)
      to get the implementation used for a given package
  - Update patch for building with old Test::More versions


author: Paul Howarth <paul@city-fan.org> - 0.05-1
changelog:
  - Update to 0.05
    - Make Test::Taint an optional dependency; it requires XS, and requiring a
      compiler for Module::Implementation defeats its purpose (CPAN RT#74817)
  - BR: perl(Test::Requires)
  - Update patch for building with old Test::More versions


author: Paul Howarth <paul@city-fan.org> - 0.06-3
changelog:
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from buildroot
  - Add commentary regarding conditionalized buildreqs


author: Paul Howarth <paul@city-fan.org> - 1.000010-1
changelog:
  - Update to 1.000010
    - Performance improvement: the creation of a Module::Metadata object
      for a typical module file has been sped up by about 40%
    - Fix t/metadata.t failure under Cygwin
    - Portability fix-ups for new_from_module() and test failures on VMS
  - This release by VPIT -> update source URL
  - Drop buildreqs for Perl core modules that aren't dual-lived
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot


author: Paul Howarth <paul@city-fan.org> - 1.000011-1
changelog:
  - Update to 1.000011
    - Fix various warning messages
  - This release by APEIRON -> update source URL


author: Paul Howarth <paul@city-fan.org> - 1.000012-1
changelog:
  - Update to 1.000012
    - Improved package detection heuristics
    - Fix ->contains_pod (CPAN RT#84932)
    - Fix detection of pod after __END__ (CPAN RT#79656)
  - This release by ETHER -> update source URL
  - Package new upstream README file


author: Paul Howarth <paul@city-fan.org> - 1.000014-1
changelog:
  - Update to 1.000014
    - Fix reliance on recent Test::Builder
    - Make tests perl 5.6 compatible
  - This release by BOBTFISH -> update source URL


author: Paul Howarth <paul@city-fan.org> - 0.68-3
changelog:
  - BR: perl(Exporter) and perl(ExtUtils::Manifest)
  - Use %{_fixperms} macro rather than our own chmod incantation


author: Paul Howarth <paul@city-fan.org> - 0.68-5
changelog:
  - BR: perl(constant), perl(Data::Dumper) and perl(lib)
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> - 0.69-1
changelog:
  - Update to 0.69
    - Support for gpg under these alternate names: gpg gpg2 gnupg gnupg2
  - This release by AUDREYT -> update source URL
  - BR:/R: perl(Text::Diff)
  - Include Andreas Koenig's GPG key in the SRPM and import it in %prep so
    that we don't need to get it from a keyserver in %check


author: Paul Howarth <paul@city-fan.org> - 0.73-1
changelog:
  - Update to 0.73
    - Constrain the user-specified digest name to /^\w+\d+$/
    - Only allow loading Digest::* from absolute paths in @INC (CVE-2013-2145)


author: Iain Arnell <iarnell@gmail.com> 2.0402-2
changelog:
  - avoid circular build-dependencies with Data::Visitor and Devel::Partialdump
    (patch from Paul Howarth rhbz#810394)


author: Paul Howarth <paul@city-fan.org> - 1.49-1
changelog:
  - update to 1.49
    - fixed problem where on some platforms test t/local/07_tcpecho.t would bail
      out if it could not bind port 1212; it now tries a number of ports to bind
      to until successful
    - improvements to unsigned casting
    - improvements to Net::SSLeay::read to make it easier to use with
      non-blocking IO: it modifies Net::SSLeay::read() to return the result from
      SSL_read() as the second return value, if Net::SSLeay::read() is called in
      list context (its behavior should be unchanged if called in scalar or void
      context)
    - fixed a problem where t/local/kwalitee.t fails with
      Module::CPANTS::Analyse 0.86
    - fixed a number of typos
    - fixed a compiler warning from Compiling with gcc-4.4 and -Wall
    - Fixed problems with get_https4: documentation was wrong, $header_ref was
      not correctly set and $server_cert was not returned
    - fixed a problem that could cause a Perl exception about no blength method
      on undef (CPAN RT#79309)
    - added documentation about how to mitigate various SSL/TLS vulnerabilities
    - SSL_MODE_* are now available as constants
  - drop upstreamed pod encoding patch


author: Paul Howarth <paul@city-fan.org> - 1.50-1
changelog:
  - update to 1.50
    - fixed a problem where t/handle/external/50_external.t would crash if any of
      the test sites were not contactable
    - now builds on VMS, added README.VMS
    - fixed a few compiler warnings in SSLeay.xs; most of them are just
      signed/unsigned pointer mismatches but there is one that actually fixes
      returning what would be an arbitrary value off the stack from
      get_my_thread_id if it happened to be called in a non-threaded build
    - added SSL_set_tlsext_host_name, SSL_get_servername, SSL_get_servername_type,
      SSL_CTX_set_tlsext_servername_callback for server side Server Name
      Indication (SNI) support
    - fixed a problem with C++ comments preventing builds on AIX and HPUX
    - perdition.org not available for tests, changed to www.open.com.au
    - added SSL_FIPS_mode_set
    - improvements to test suite so it succeeds with and without FIPS mode
      enabled
    - added documentation, warning not to pass UTF-8 data in the content
      argument to post_https


author: Paul Howarth <paul@city-fan.org> - 1.51-1
changelog:
  - update to 1.51
    - fixed a problem where SSL_set_SSL_CTX is not available with
      OpenSSL < 0.9.8f (CPAN RT#81940)
  - fix bogus date in spec changelog


author: Paul Howarth <paul@city-fan.org> - 1.52-1
changelog:
  - update to 1.52
    - rebuild package with gnu format tar, to prevent problems with unpacking on
      other systems such as old Solaris


author: Paul Howarth <paul@city-fan.org> - 1.54-1
changelog:
  - update to 1.54
    - added support for SSL_export_keying_material where present (i.e. in OpenSSL
      1.0.1 and later)
    - changed t/handle/external/50_external.t to use www.airspayce.com instead of
      perldition.org, who no longer have an https server
    - patch to fix a crash: P_X509_get_crl_distribution_points on an X509
      certificate with values in the CDP extension that do not have an ia5 string
      would cause a segmentation fault when accessed
    - change in t/local/32_x509_get_cert_info.t to not use
      Net::SSLeay::ASN1_INTEGER_get, since it works differently on 32 and 64 bit
      platforms
    - updated author and distribution location details to airspayce.com
    - improvement to test 07_sslecho.t so that if set_cert_and_key fails we can
      tell why


author: Paul Howarth <paul@city-fan.org> - 0.12-1
changelog:
  - Update to 0.12:
    - Fix tests to pass with Carp 1.25 (CPAN RT#75520)
  - BR: perl(Test::Spelling), aspell-en
  - Add patch to accept "deprecations" as a valid dictionary word
  - Update patches to apply cleanly
  - Don't need to remove empty directories from buildroot
  - Don't use macros for commands
  - Drop EPEL-4 support:
    - Drop patch supporting build with ExtUtils::MakeMaker < 6.30


author: Paul Howarth <paul@city-fan.org> - 0.13-1
changelog:
  - Update to 0.13:
    - Fix dist.ini to not add Test::Spelling as a requirement
  - Drop %defattr, redundant since rpm 4.4
  - Test::Requires available on all supported distributions


author: Paul Howarth <paul@city-fan.org> - 0.103-8
changelog:
  - Run Perl::Critic test in %check too
  - BR: perl(Test::Perl::Critic)
  - BR: perl(Carp) and perl(Symbol), which might be dual-lived
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Drop version requirement for perl(ExtUtils::MakeMaker); older versions work
    without problems, e.g. version 6.17 on EL-4
  - Make %files list more explicit
  - Don't use macros for commands
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.103-14
changelog:
  - Drop EPEL-4 support
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot
  - BR: perl(File::Spec)


author: Paul Howarth <paul@city-fan.org> - 0.32-1
changelog:
  - Update to 0.32
    - Bring the behavior of has_symbol for nonexistant scalars into line with the
      XS version
    - Invalid package names (for instance, Foo:Bar) are not allowed
    - Invalid stash entry names (anything containing ::) are not allowed
  - Update patches to apply cleanly
  - Bump perl(Package::Stash::XS) version requirement to 0.24


author: Paul Howarth <paul@city-fan.org> - 0.33-6
changelog:
  - Drop EPEL-4 support
    - Drop %defattr, redundant since rpm 4.4
    - Test::LeakTrace, Test::Requires and Test::Script are now universally available
    - A suitably recent version of ExtUtils::MakeMaker is now universally available
  - Don't need to remove empty directories from the buildroot


author: Paul Howarth <paul@city-fan.org> - 0.34-1
changelog:
  - Update to 0.34
    - Support anonymous stashes on newer perl versions
    - Prevent harmful effects from invalid settings for
      $ENV{PACKAGE_STASH_IMPLEMENTATION}
    - Switch to Module::Implementation
  - BR: perl(Module::Implementation) ≥ 0.06
  - BR: perl(base) for test suite
  - Bump Package::Stash::XS version requirement to 0.26
  - Explicitly run extra tests (except on RHEL ≥ 7, where the necessary
    build dependencies may not be available)
  - Update patch for building with old Test::More version in EPEL-5


author: Paul Howarth <paul@city-fan.org> - 0.23-1
changelog:
  - Update to 0.23
    - Fix the test for scalar values, again
    - Disallow assigning globrefs to scalar glob slots (this doesn't actually
      make any sense)
  - Update patches for old ExtUtils::MakeMaker and Test::More versions
  - perl(Pod::Coverage::TrustPod) now available in EPEL-4 too
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 0.25-1
changelog:
  - Update to 0.25
    - Invalid package names (for instance, Foo:Bar) are not allowed
    - Invalid stash entry names (anything containing ::) are not allowed
  - Update patches to apply cleanly


author: Paul Howarth <paul@city-fan.org> - 0.25-6
changelog:
  - Drop EPEL-4 support
    - Test::LeakTrace now universally available
    - Suitably recent version of ExtUtils::MakeMaker now universally available
    - Drop %defattr, redundant since rpm 4.4
  - BR: perl(File::Temp)
  - Don't need to remove empty directories from the buildroot


author: Paul Howarth <paul@city-fan.org> - 0.26-1
changelog:
  - Update to 0.26
    - Internal refactorings to support Package::Anon stashes
  - BR: perl(base) and perl(Test::Requires) for test suite
  - Update patch for old distro compatibility
  - Explicitly run the release/author tests


author: Ralf Corsépius <corsepiu@fedoraproject.org> - 1.08-1
changelog:
  - Upstream update.
  - Update patch.
  - Update BRs.
  - Add %bcond --with network.
  - Fix up %changelog dates.


author: Paul Howarth <paul@city-fan.org> - 1.002-241
changelog:
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot
  - Don't delete the extra tests when bootstrapping, but don't run them either


author: Paul Howarth <paul@city-fan.org> - 1.003-1
changelog:
  - Update to 1.003
    - Fixed detection of VOS; $^O reports 'vos', not 'VOS'
    - Additional release tests
  - BR: perl(File::Spec::Functions), perl(List::Util),
    perl(Perl::Critic::Policy::Lax::ProhibitStringyEval::ExceptForRequire),
    perl(Pod::Wordlist::hanekomu), perl(Test::MinimumVersion),
    perl(Test::Perl::Critic), perl(Test::Spelling) and perl(Test::Version)
  - Identify purpose of each build requirement
  - Update patches for building on old distributions
  - Don't run extra tests for EPEL-5/6 builds


author: Paul Howarth <paul@city-fan.org> - 1.03-18
changelog:
  - Drop -tests subpackage (general lack of interest in this), but include
    them as documentation for the main package
  - No need to remove empty directories from buildroot
  - Add buildreqs for Perl core modules that might be dual-lived
  - Fix script interpreter for test suite since we're packaging it
  - Drop redundant %{?perl_default_filter}
  - Don't use macros for commands
  - Make %files list more explicit
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 1.05-10
changelog:
  - Drop -tests subpackage (general lack of interest in this), but include
    them as documentation for the main package
  - Don't use macros for commands
  - No need to remove empty directories from buildroot
  - Add buildreqs for Perl core modules that might be dual-lived
  - Rename makefile patch to include module name and version
  - Fix script interpreter for test suite since we're packaging it
  - Add filter for doc-file dependencies if we don't have %perl_default_filter
  - Make %files list more explicit
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.982-10
changelog:
  - Explicitly require perl(Package::Generator)
  - Make %files list more explicit
  - Mark POD files as %doc
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Don't need to remove empty directories from buildroot
  - Don't use macros for commands
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.984-1
changelog:
  - Update to 0.984 (documentation fixes)
  - Add filters for provides/requires from the test suite
  - BR: perl(base) and perl(Exporter) for the test suite


author: Paul Howarth <paul@city-fan.org> - 0.985-1
changelog:
  - Update to 0.985 (documentation fixes)
  - Add patch to support building with Test::More < 0.88
  - Run the extra tests too
  - BR: perl(File::Find) and perl(File::Temp) for test suite
  - BR: perl(Test::Pod) for the extra tests


author: Paul Howarth <paul@city-fan.org> - 0.001004-1
changelog:
  - Update to 0.001004 (fix skipping when Sub::Exporter isn't installed)
  - This release by MSTROUT -> update source URL
  - No LICENSE file in this release
  - Update old Test::More patch


author: Paul Howarth <paul@city-fan.org> - 0.001005-1
changelog:
  - Update to 0.001005
    - Add support for tags
    - Warn if defaults are not in exports
    - Add explicit dependency on Test::More 0.89
  - This release by LEONT -> update source URL
  - Update old Test::More patch


author: Paul Howarth <paul@city-fan.org> - 0.001006-1
changelog:
  - Update to 0.001006
    - Handle ':all' correctly
  - Update old Test::More patch
  - Drop redundant buildreq perl(Test::Pod)


author: Paul Howarth <paul@city-fan.org> - 0.001008-1
changelog:
  - Update to 0.001008
    - Rewrite -tag to :tag for Exporter.pm
    - Fix prereqs
  - Update old Test::More patch, and apply if we have Test::More < 0.96
  - Bump perl(Exporter) version requirement to 5.58


author: Paul Howarth <paul@city-fan.org> - 0.001009-1
changelog:
  - Update to 0.001009
    - Disallow version names in random parts of the import list for consistency
      with Sub::Exporter (CPAN RT#83491)
  - Update old Test::More patch, and apply if we have Test::More < 0.88


author: Paul Howarth <paul@city-fan.org> - 0.001010-1
changelog:
  - Update to 0.001010
    - Fix module name in Makefile.PL (CPAN RT#83932)
    - Work around Exporter.pm not installable on perl < 5.8.0
  - Update old Test::More patch


author: Paul Howarth <paul@city-fan.org> - 0.926-6
changelog:
  - Be more selective about what to exclude when bootstrapping
  - Don't use macros for commands
  - Drop %defattr, redundant since rpm 4.4
  - Don't need to remove empty directories from the buildroot
  - Make %files list more explicit
  - Fix typo in %description


author: Iain Arnell <iarnell@gmail.com> - 0.05-1
changelog:
  - Update to latest upstream version
  - Clean up spec for modern rpmbuild
  - BR perl(Test::More)
  - Requires perl(DynaLoader) and perl(Exporter)


author: Paul Howarth <paul@city-fan.org> - 0.05-6
changelog:
  - Add patch for CPAN RT#50524 (copy contents of %DB::sub entry if it exists)
  - Reinstate compatibility with old distributions like EL-5
    - Add BuildRoot definition
    - Clean buildroot in %install
    - Restore %clean section
    - Restore %defattr
    - Don't use + to terminate find -exec commands
  - Spec clean-up
    - Make %files list more explicit
    - Use DESTDIR rather than PERL_INSTALL_ROOT
    - Don't use macros for commands
    - Use tabs
    - Add buildreqs for Perl core modules that might be dual-lived
    - Explicit requires for "use base XXX;" only required prior to rpm 4.9


author: Petr Pisar <ppisar@redhat.com> - 2.30-17
changelog:
  - Modernize spec file
  - Specify all dependencies
  - Change license to "(Copyright only) and (Artistic or GPL+)" because of
    ppport.h


author: Paul Howarth <paul@city-fan.org> - 0.98-241
changelog:
  - Merge tests sub-package back into main package
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4
  - Make %files list more explicit
  - Don't use macros for commands
  - Mark Tutorial.pod as %doc
  - Drop explicit dependency on perl-devel


author: Jitka Plesnikova <jplesnik@redhat.com> - 1:1.20-10
changelog:
  - Remove perl(base) from BR
  - Package README and ChangeLog
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Remove deleting empty directories


author: Ralf Corsépius <corsepiu@fedoraproject.org> 804.029-4
changelog:
  - Split out Tk/MMutil.pm, Tk/install.pm, Tk/MakeDepend.pm into perl-Tk-devel.
    (Avoid dependency on perl-devel - BZ 741777).


author: Paul Howarth <paul@city-fan.org> - 0.11-4
changelog:
  - BR: perl(Carp)
  - Don't need to remove empty directories from buildroot
  - Don't use macros for commands
  - Drop redundant %{?perl_default_filter}
  - Enhance %description
  - Reinstate EPEL-5 compatibility:
    - Define buildroot
    - Clean buildroot in %install and %clean
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 1.59-3
changelog:
  - Break build dependency loop by only using perl(Business::ISBN) if we're not
    bootstrapping
  - BR: perl(Carp) and perl(Exporter)
  - Make %files list more explicit
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Use %{_fixperms} macro rather than our own chmod incantation
  - Don't use macros for commands


author: Paul Howarth <paul@city-fan.org> - 1.60-1
changelog:
  - Update to 1.60
    - Do not reverse the order of new parameters
    - Avoid test failure if the local hostname is 'foo' (CPAN RT#75519)
    - Work around a stupid join bug in 5.8.[12] (CPAN RT#59274)
    - Updated repository URL
  - Don't need to remove empty directories from buildroot
  - BR: perl(constant)


author: Paul Howarth <paul@city-fan.org> - 1.60-8
changelog:
  - Retain runtime dependency of perl(Business::ISBN) when bootstrapping; a
    better fix for the build dependency cycle was to drop LWP::Simple as a
    buildreq of perl-Business-ISBN (needed only for optional tests) when
    bootstrapping


author: Iain Arnell <iarnell@gmail.com> 0.101021-1
changelog:
  - update to latest upstream
  - Version::Requirements is now DEPRECATED
    use CPAN::Meta::Requirements, which is a drop-in replacement


author: Jitka Plesnikova <jplesnik@redhat.com> - 2.41-8
changelog:
  - Update dependencies and summary
  - Remove pre-RPM-4.9 filters
  - Remove deleting empty directories
  - Update REC-xml-19980210.xml to match new encoding


author: Paul Howarth <paul@city-fan.org> - 0.81-2
changelog:
  - R: perl(Carp) and perl(Data::Dumper)
  - BR: perl(Carp), perl(constant) and perl(Exporter)
  - Release tests no longer shipped, so drop buildreqs for them and don't bother
    setting AUTOMATED_TESTING; run tests even when bootstrapping


author: Paul Howarth <paul@city-fan.org> - 0.84-2
changelog:
  - Haven't needed to fix documentation character encoding since 0.79
  - Drop Test::Base build dependency again to avoid a BR loop (#215637)
  - Filter private provides perl(yaml_mapping), perl(yaml_scalar) and
    perl(yaml_sequence)
  - Don't need to remove empty directories from the buildroot
  - This release by MSTROUT -> update source URL


author: Paul Howarth <paul@city-fan.org> - 3.4-4
changelog:
  - Reinstate compatibility with older distributions like EL-5
  - Drop -tests subpackage (general lack of interest in this), but include
    them as documentation for the main package
  - Don't use macros for commands
  - Make %files list more explicit
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 3.5-1
changelog:
  - Update to 3.5:
    - Localise $^W, as this causes warnings with 5.16 when some lost soul uses
      -w; common::sense doesn't support $^W, but tries to shield module authors
      and programs from its ill effects
  - Don't need to remove empty directories from buildroot
  - Drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> - 3.6-1
changelog:
  - Update to 3.6:
    - Work around more 5.16 breakage - $^H doesn't work as nicely as P5P make
      you believe
    - Add features: unicode_strings current_sub fc evalbytes
    - Disable features: array_base


author: Paul Howarth <paul@city-fan.org> - 0.22-1
changelog:
  - Update to 0.22
    - Limit the debugger workarounds to perls between 5.8.8 and 5.14, extend
      debugger support to all perl versions (CPAN RT#69862)
    - If possible, automatically install (but not load) the debugger workaround
      libraries on perls between 5.8.8 and 5.14 (CPAN RT#72368)
    - Add back dropped NAME section (CPAN RT#70259)
    - Simplify the ≥ 5.10 PP variant even more - move the hook from DESTROY
      into DELETE
    - Force explicit callback invocation order on 5.8 PP
    - Replace the %^H tie approach with fieldhashes, which fixes all known
      corner cases and caveats on supported perls ≥ 5.8.1 (CPAN RT#73402)
    - Compile away the debugger fixup on perls ≥ 5.15.5
  - Only BR:/R: Sub::Identify and Sub::Name for perl versions where they're
    actually needed
  - Reinstate compatibility with old distributions like EL-5
    - Patch test suite to work with Test::More < 0.88 if necessary
    - Filter dependency on Hash::Util::FieldHash on perl 5.8.x
    - Add back buildroot definition, %clean section, %defattr etc.
  - Only include tests if we have %{perl_default_filter} to avoid the unwanted
    requires/provides that come with them
  - Drop redundant buildreq perl(CPAN)
  - Make %files list more explicit
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 0.23-1
changelog:
  - Update to 0.23
    - Rely on B::Hooks::EndOfScope version 0.10 to fix issues with new
      Module::Runtime versions (≥ 0.012) on perl 5.10 due to incorrect hook
      firing due to %^H localisation
    - Fix failures on 5.13.6 due to incorrect version number threshold
      (CPAN RT#74683)
  - Don't need to remove empty directories from buildroot
  - Drop %defattr, redundant since rpm 4.4


author: Paul Howarth <paul@city-fan.org> - 0.24-1
changelog:
  - Update to 0.24
    - Properly skip debugger test when optional deps not available
    - Make sure pure-perl tests pass correctly on space-containing paths
      (CPAN RT#77528)
    - Remove all the pure-perl fallback code and depend on PP-capable
      B::H::EOS 0.12
  - Module no longer attempts to use Hash::Util::FieldHash, so drop filters
  - BR: perl(Sub::Identify) and perl(Sub::Name) unconditionally
  - BR: perl(base), perl(ExtUtils::CBuilder) and perl(lib)
  - Drop BR: perl(FindBin), not dual-lived upstream
  - Update patch for building with old Test::More versions


author: Marcela Mašláňová <mmaslano@redhat.com> - 1:0.225-4
changelog:
  - Install to vendor directories rather than perl core directories so as to
    avoid conflicts between our debuginfo and the main perl-debuginfo package


author: Paul Howarth <paul@city-fan.org> - 1:0.225-6
changelog:
  - Reinstate compatibility with old distributions like EL-5
    - Add back buildroot definition and cleaning
  - Use DESTDIR rather than PERL_INSTALL_ROOT
  - Make %files list more explicit
  - Drop redundant %{?perl_default_filter}
  - Don't use macros for commands
  - Use tabs


author: Paul Howarth <paul@city-fan.org> - 1:0.225-242
changelog:
  - Don't need to remove empty directories from the buildroot
  - Drop %defattr, redundant since rpm 4.4


author: Jitka Plesnikova <jplesnik@redhat.com> - 1.42-2
changelog:
  - Add BR perl(File::Spec)
  - Replace PERL_INSTALL_ROOT with DESTDIR
  - Remove deleting empty directories
  - Remove defattr


author: Remi Collet <rcollet@redhat.com> 5.5.0-0.11.RC3
changelog:
  - also drop JSON from sources
  - clean conditional for JSON (as removed from the sources)
  - clean conditional for FPM (always build)


author: Remi Collet <rcollet@redhat.com> - 5.5.0-2
changelog:
  - add security fix for CVE-2013-4113
  - add missing ASL 1.0 license
  - 32k stack size seems ok for tests on both 32/64bits build


author: Remi Collet <rcollet@redhat.com> - 5.5.1-1
changelog:
  - update to 5.5.1
  - add Provides: php(pdo-abi), for consistency with php(api)
    and php(zend-abi)
  - improved description for mod_php
  - fix opcache ZTS configuration (blacklists in /etc/php-zts.d)
  - add missing man pages (phar, php-cgi)


author: Remi Collet <remi@fedoraproject.org> 1:1.9.4-14
changelog:
  - add explicit requires on all needed extensions (phpci)
  - fix pecl launcher (need ini to be parsed for some
    extenstions going to be build as shared, mainly simplexml)
  - add fix for new unpack format (php 5.5)


author: Remi Collet <remi@fedoraproject.org> - 3.1.13-1
changelog:
  - Version 3.1.13 (beta) - API 3.1.0 (stable)
  - add patches from upstream (fixes some tests)
  - change serveur port for tests (allow 32/64 bits build)


author: Remi Collet <remi@fedoraproject.org> - 3.1.15-0.1.svn329724
changelog:
  - update to 3.1.15dev with new directive 'enable_opcode_cache' (disabled)
    which allow to cache only user data and use another opcode cache
  - switch most configuration to upstream default


author: Remi Collet <rcollet@redhat.com> - 1.3.0-1
changelog:
  - release 1.3.0 (beta)
  - use system json-c when available (fedora >= 20)
  - use jsonc name for module and configuration


author: Ville Skyttä <ville.skytta@iki.fi> - 2.2.5-1
changelog:
  - Update to 2.2.5.
  - Hardlink binaries instead of shipping duplicates (#785834).
  - Build with $RPM_LD_FLAGS.
  - Run test suite during build.


author: Marcela Mašláňová <mmaslano@redhat.com> - 2:0.12.5-7
changelog:
  - Perl mass rebuild
  - add patch pilot-link-0.12.5-redefinePerlsymbols.patch - pilot-link was using
    old POLLUTED symbols, which shouldn't be used anymore 717939
  - added perl_default_filter - don't provide Pilot.so


author: Peter Schiffer <pschiffe@redhat.com> - 2:0.12.5-11
changelog:
  - related: #757011
    cleaned patch
  - resolves: #733987
    added requires for pilot-link-libs to pilot-link, removed obsoletes
    pilot-link from pilot-link-libs
  - resolves: #733989
    moved udev rules to the libs subpackage, so it could be used without
    main package


author: Kalev Lember <kalev@smartlink.ee> - 1.07-5
changelog:
  - use System Environment/Libraries group for main package
  - removed R: pkgconfig from devel subpackage


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-44
changelog:
  - Fix sepolicy-generate man page to clear up options/policy type
  - Add Miroslav Grepl to not generate man page when doing
    sepolicy generate --customize
  - Add support for executing semanage user within spec file
  - Fix generation of confined admin domains, to handle booleans properly.


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-46
changelog:
  - Fix the name of the spec file generated in the build script
  - Add mgrepl patch to support argparse for semanage command parsing


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-46.1
changelog:
  - Fix audit2allow -o to open file for append
  - Fix the name of the spec file generated in the build script


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-46.2
changelog:
  - Fix sepolicy generate --confined_admin to generate tunables
  - Add new interface to generate entrypoints for use with new gui


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-46.3
changelog:
  - Update Translations
  - Remove requires for systemd-sysv
  - Move systemd-units require to restorecond section
  - More sepolicy interfaces for gui
  - Fixes for semanage -i and semanage -o 
  - Remove --version  flage from sandbox


author: Dan Walsh <dwalsh@redhat.com> - 2.1.14-46.5
changelog:
  - Move audit2allow back into policycoreutils-python package
  - Fix semanage logging to syslog
  - Fix setsebool error handling
  - Fix fixfiles scripts to work as documentet


author: Miloslav Trmač <mitr@redhat.com> - 0.110-4
changelog:
  - Make the JavaScript engine mandatory.  The polkit-js-engine package has been
    removed, main polkit package Provides:polkit-js-engine for compatibility.
  - Add Requires: polkit-pkla-compat
    Resolves: #908808


author: Miloslav Trmač <mitr@redhat.com> - 0.110-4
changelog:
  - Shut up rpmlint about Summary:
  - Build with V=1
  - Use %{_unitdir} instead of hard-coding the path
  - Use the new systemd macros, primarily to run (systemctl daemon-reload)
    Resolves: #857382


author: Miloslav Trmač <mitr@redhat.com> - 0.111-1
changelog:
  - Update to polkit-0.111
    Resolves: #917888
  - Use SpiderMonkey from mozjs17 instead of js
  - Ship the signature in the srpm
  - Try to preserve timestamps in (make install)


author: Rex Dieter <rdieter@fedoraproject.org> 0.99.0-3
changelog:
  - patch to bring polkit auth dialog to front
  - patch restart polkit-kde on crash 
  - patch to remove unimplimented 'remember authorization' checkbox


author: Miloslav Trmač <mitr@redhat.com> - 0.1-2
changelog:
  - Add a comment above License about SRPM-only licenses
  - Reword Summary: to avoid a rpmlint warning
  - Move INSTALL= to the %install section


author: Rex Dieter <rdieter@fedoraproject.org> 0.99.0-3
changelog:
  - upstream crash patch (kde#258916,#684625)
  - pull a couple more upstream patches
  - -devel: drop Req: polkit-devel


author: Marek Kasik <mkasik@redhat.com> 0.22.1-3
changelog:
  - Merge of commits from poppler's "poppler-0.22" branch
  - It doesn't contain commits which needs soname bump
  - For the list of included commits see the header of the patch


author: Panu Matilainen <pmatilai@redhat.com> - 1.13-12
changelog:
  - Hack poptBadOption() to return something semi-meaningful on exec alias
    failures (#697435, #710267)
  - Run internal test-suite on build, minimal as it might be


author: Orcan Ogetbil <oget [DOT] fedora [AT] gmail [DOT] com> 217-6
changelog:
  - Fix multilib conflict RHBZ#831432
  - Don't bulid PDF doc, as it causes another multilib conflict
  - Specfile cleanup. Drop old GCJ-Java and Python bits


author: Pavel Raiskup <praiskup@redhat.com> - 9.2.4-2
changelog:
  - postgresql-setup: don't create whole path to server's data to make sure that
    the parent directory has correct permissions (#972425)


author: Pavel Raiskup <praiskup@redhat.com> - 9.2.4-3
changelog:
  - add atomic operations support for aarch64 to preupgrade version also (#970661)
  - apply the forgotten man-page-day patch (#948933)


author: Jozef Mlich <jmlich@redhat.com> - 9.2.5-1
changelog:
  - Update to PostgreSQL 9.2.5, for various fixes described at
    http://www.postgresql.org/docs/9.2/static/release-9-2-5.html


author: <sshedmak@redhat.com> - 1.3.2-1
changelog:
  - Fixed FSType, Preferred Style, UinqueID and Fullname
  - Fixed Invalid Glyph Names reported by fontlint
  - with exceptions string added in License


author: Sandeep Shedmake <sshedmak@redhat.com> - 1.3.3-1
changelog:
  - Added Indian Rupee Sign (U+20B9)
  - Modified URL to fedorahosted.org domain
  - Updated Source0 link
  - Added BuildRequires fontforge
  - Modified doc section


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-29
changelog:
  - make radius plugin config parser less strict
  - add creation of dip system group
  - resolves : #906913, #918296


author: Michal Sekletar <msekleta@redhat.com> - 2.4.5-31
changelog:
  - don't ship /var/lock/ppp in rpm payload and create it in %post instead
  - fix installation of tmpfiles.d configuration
  - enable hardened build
  - fix bogus dates in changelog
  - compile all binaries with hardening flags


author: Paul Howarth <paul@city-fan.org> 1.7.2-14
changelog:
  - Build with warning-fix patches to address occasional segfaults (#749455)
  - Patches have all now been merged upstream


author: Paul Howarth <paul@city-fan.org> 1.7.2-17
changelog:
  - Add note in options.pptp about MPPE not being available in FIPS mode
    (#845112)
  - Add note in options.pptp about PPTP with MSCHAP-V2 being insecure


author: Jaroslav Škarvada <jskarvad@redhat.com> - 1.8.0-1
changelog:
  - New version
    Resolves: rhbz#1022685
  - Dropped compat, ip-path, pptpsetup, makedeps, parallel-build,
    pptpsetup-encrypt, waitpid, conn-free, conn-free2,
    call-disconnect-notify, nohostroute-option, fsf-update
    sign-compare, unused, prototype, nested-externs, aliasing
    options.pptp, so_mark, const, field-init patches (all upstreamed)


author: Jakub Jelinek <jakub@redhat.com> 0.4.6-6
changelog:
  - fix up DWARF4 DW_AT_data_member_location handling
  - add .debug_macro support
  - add DWZ multifile support


author: Miroslav Lichvar <mlichvar@redhat.com> 3.22-24
changelog:
  - rename getline to avoid conflict with glibc (#505977)
  - add -Wno-comments to CFLAGS
  - remove package name from summary


author: Jaromir Capik <jcapik@redhat.com> - 3.3.8-7
changelog:
  - Disabling screen content restoration when exiting 'top' (#977561)
  - Enabling SIGWINCH flood prevention


author: Conrad Meyer <konrad@tylerc.org> - 2.4.1-9
changelog:
  - Fix packaging bug, -emacs-el subpackage should depend on -emacs subpackage of
    the same version (%version), not the emacs version number...


author: Conrad Meyer <cemeyer@uw.edu> - 2.5.0-2
changelog:
  - Remove changelog history from before 2010
  - This spec already runs autoreconf -fi during %build, but bump build for
    rhbz #926374


author: Jaromir Capik <jcapik@redhat.com> - 6.5.5-8
changelog:
  - #759321 - psacct logrotate script references init.d service
  - #735300 - Enabling psacct causes daily cron spam


author: Richard W.M. Jones <rjones@redhat.com> 22.20-1
changelog:
  - Update to 22.20.
    Contains a fix for: http://sourceforge.net/p/psmisc/bugs/53/
  - Fix src/pstree.c when SELinux is available.


author: Chris Tyler <chris@tylers.info> - 2.0.7-12
changelog:
  - Removed FORTIFY_SOURCE for %{arm} archs per Ajay Ramaswamy <ajayr@krithika.net>
  - See https://bugzilla.redhat.com/show_bug.cgi?id=750243


author: Michael Schwendt <mschwendt@fedoraproject.org> - 2.0.7-19
changelog:
  - Build with -D_FILE_OFFSET_BITS=64 to get stat64 in pth_high.c
  - Guard the ARM CFLAGS sed substitution.


author: Tomáš Mráz <tmraz@redhat.com> - 0.13-6
changelog:
  - Check for error returns which cause segfaults in FIPS mode
  - Fix missing error check and leak found by gcc-with-cpychecker (#800086)


author: Tomáš Mráz <tmraz@redhat.com> - 0.13.1-1
changelog:
  - new upstream release fixing a security issue with string
    formatting subjectAltName of a certificate


author: Rahul Sundaram <sundaram@fedoraproject.org> - 0.8.0-3
changelog:
  - Rebuild agains since the wv soname bump was accidental
  - Remove superflous BuildRoot definitions and removals


changelog: - Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild
author:
  Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.0.1206569328141510525648634803928199668821045408958-2


changelog: - Rebuilt for https://fedoraproject.org/wiki/Fedora_19_Mass_Rebuild
author:
  Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 0.6.0.1206569328141510525648634803928199668821045408958-3


author: John (J5) Palmieri <johnp@redhat.com> - 2.28.6-2
changelog:
  - disable introspection in anticipation of pygobject3
  - https://bugzilla.redhat.com/show_bug.cgi?id=731851
  - pygobject2 now becomes legacy for static binding support (e.g. PyGTK)


author: Colin Walters <walters@redhat.com> - 2.28.6-8
changelog:
  - Add various missing BuildRequires, switch to pkgconfig() syntax
  - Backport upstream patch which fixes a crasher in some applications


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.2-1
changelog:
  - Update for new upstream release.  Doesn't add any new code, just switches
    from a snapshot to a release and bumps version


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.3-1
changelog:
  - New upstream release
  - Build a python3 subpackage
  - Run the test suite even though we ignore the output


author: Miloslav Trmač <mitr@redhat.com> - 0.3-5
changelog:
  - Disable -fstrict-aliasing (see http://www.python.org/dev/peps/pep-3123/ for
    rationale)
  - Don't ship .pyc files from the test suite in %doc, to avoid multilib
    conflicts


author: Chris Lumens <clumens@redhat.com> - 1.99.23-1
changelog:
  - Don't print any of the autopart command if autopart is disabled (#888841). (clumens)
  - Call sys.exit instead of os._exit (#891419, gconradi AT factset.com). (clumens)
  - Beware of possible unicode strings (#876293) (vpodzime)
  - Remove the lang.apply method (#882186). (clumens)
  - Add 'make coverage' command to the make file (stefw)


author: Chris Lumens <clumens@redhat.com> - 1.99.25-1
changelog:
  - pylint appears to have gotten pickier. (clumens)
  - Fix typo in --wpakey string representation method (rvykydal)
  - Also add the F19 handler file. (clumens)
  - Don't strip the newline from reboot or shutdown commands (#915013). (clumens)
  - Add bonding support to RHEL 7 (rvykydal)
  - Add bonding support to F19 (rvykydal)
  - Add support for F19 (rvykydal)


author: Chris Lumens <clumens@redhat.com> - 1.99.26-1
changelog:
  - parser.py: Allow shlex to strip lines (fedora.dm0)
  - Fix a bug in logvol duplicate reporting (#924579, mhuth). (clumens)
  - Add gid attribute to User command and associated data structure (msivak)
  - Make sure tests can run and report import errors (bcl)
  - Add network --vlanid option to Fedora. (rvykydal)


author: Chris Lumens <clumens@redhat.com> - 1.99.28-1
changelog:
  - Add network --ipv6gateway option (#905226) (rvykydal)
  - Add lang --addsupport option (#912364) (rvykydal)


author: Chris Lumens <clumens@redhat.com> - 1.99.32-1
changelog:
  - transifex.net is now transifex.com (bcl)
  - Update raid --device to be an array name specifier. (dlehman)
  - Add more tests for the realm command (mkolman)
  - RHEL7 is now more or less based on F19, at least for kickstart. (clumens)
  - realm: Fix --no-password option (stefw)
  - Add man pages for all programs (#948440). (clumens)


author: Brian C. Lane <bcl@redhat.com> 0.26.0-1
changelog:
  - Upstream 0.26.0
  - Add python3-pylint and python3-pylint-gui subpackages. Not ready to turn it
    on yet due to this upstream bug: http://www.logilab.org/ticket/110213


author: Jesse Keating <jkeating@redhat.com> - 1.12-1
changelog:
  - Fix mock-config (ticket #13) (jkeating)
  - Make md5 a common build argument (jkeating)
  - Move arches to be a common build argument (ticket #3) (jkeating)
  - Find remote branch to track better (jkeating)


author: Jesse Keating <jkeating@redhat.com> - 1.13-1
changelog:
  - Return proper exit code from builds (#20) (jkeating)
  - Fix md5 option in the build parser (jkeating)
  - More completion fixes (jkeating)
  - Add mock-config and mockbuild completion (jkeating)
  - Simplify test for rpkg availability. (ville.skytta)
  - Fix ~/... path completion. (ville.skytta (jkeating)
  - Add a --raw option to clog (#15) (jkeating)
  - Make things quiet when possible (jkeating)
  - Fix up figuring out srpm hash type (jkeating)
  - Allow defining an alternative builddir (jkeating)
  - Conflict with older fedpkg (jkeating)
  - Attempt to automatically set the md5 flag (jkeating)
  - Use -C not -c for config.  (#752411) (jkeating)
  - Don't check gpg sigs when importing srpms (ticket #16) (jkeating)
  - Enable md5 option in mockbuild (twaugh) (jkeating)


author: Jesse Keating <jkeating@redhat.com> - 1.14-1
changelog:
  - Warn if the checked out branch cannot be pushed (jkeating)
  - Warn if commit or tag fails and we don't push (#21) (jkeating)
  - Honor ~/.koji/config (rhbz#785776) (jkeating)
  - Update help output for switch-branch (rhbz#741742) (jkeating)


author: Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.5-1
changelog:
  - Updated to Python 2.7.5.
  - Refreshed patches: 0 (config), 102 (lib64), 121 (add Modules to build path),
  153 (gdb test noise)
  - Dropped patches: 126, 127 (big endian issues, both fixed upstream),
  175 (configure -Wformat, fixed upstream)
  - Synced patch numbers with python3.spec.


author: Robert Scheck <robert@fedoraproject.org> 0.3.2-2
changelog:
  - Updated source URL to match with the guidelines (#265381)
  - Use get_python_lib() macro according to the policy (#265381)


author: Matt Domsch <mdomsch@fedoraproject.org> - 0.70-1
changelog:
  - Version 0.70 (2009-10-29)
    * New "major" version because it may break compatibility
    * Fix __cmp__(): IP('0.0.0.0/0') and IP('0.0.0.0') are not equal
    * Fix IP.net() of the network "::/0": "::" instead of "0.0.0.0".
      IPy 0.63 should fix this bug, but it wasn't.


author: Matt Domsch <mdomsch@fedoraproject.org> - 0.75-1
changelog:
  - Version 0.75 (2011-04-12)
   * IP('::/0').netmask() gives IP('::') instead of IP('0.0.0.0') (BZ#690625)
   * Fix tests for Python 3.1 and 3.2
   * ip.__nonzero__() and (ipa in ipb) return a bool instead of 0 or 1
   * IP('0.0.0.0/0') + IP('0.0.0.0/0') raises an error, fix written by Arfrever
   * Support Python 3: setup.py runs 2to3
   * Update the ranges for IPv6 IPs
   * Fix reverseName() and reverseNames() for IPv4 in IPv6 addresses
   * Drop support of Python < 2.5
   * Include examples and MANIFEST.in in source build (add them to MANIFEST.in)
   * Remove __rcsid__ constant from IPy module
   * Use xrange() instead of range()
   * Use isinstance(x, int) instead of type(x) == types.IntType
   * Prepare support of Python3 (use integer division: x // y)
   * Fix IP(long) constructor: ensure that the address is not too large
   * Constructor raise a TypeError if the type is not int, long, str or unicode
   * 223.0.0.0/8 is now public (belongs to APNIC)


author: Brian C. Lane <bcl@redhat.com> 0.24.1-1
changelog:
  - Upstream v0.24.1
  - Add python3-logilab-astng subpackage to spec. Not ready to turn it on yet
    due to this upstream bug: http://www.logilab.org/ticket/110213


author: Nils Philippsen <nils@redhat.com> - 0.9.6-1
changelog:
  - version 0.9.6:
    * Backport r493-494: documentation typo fixes.
    * Make the CLDR import script work with Python 2.7.
    * Fix various typos.
    * Fixed Python 2.3 compatibility (ticket #146, #233).
    * Sort output of list-locales.
    * Make the POT-Creation-Date of the catalog being updated equal to
      POT-Creation-Date of the template used to update (ticket #148).
    * Use a more explicit error message if no option or argument (command) is
      passed to pybabel (ticket #81).
    * Keep the PO-Revision-Date if it is not the default value (ticket #148).
    * Make --no-wrap work by reworking --width's default and mimic xgettext's
      behaviour of always wrapping comments (ticket #145).
    * Fixed negative offset handling of Catalog._set_mime_headers (ticket #165).
    * Add --project and --version options for commandline (ticket #173).
    * Add a __ne__() method to the Local class.
    * Explicitly sort instead of using sorted() and don't assume ordering
      (Python 2.3 and Jython compatibility).
    * Removed ValueError raising for string formatting message checkers if the
      string does not contain any string formattings (ticket #150).
    * Fix Serbian plural forms (ticket #213).
    * Small speed improvement in format_date() (ticket #216).
    * Fix number formatting for locales where CLDR specifies alt or draft
      items (ticket #217)
    * Fix bad check in format_time (ticket #257, reported with patch and tests by
      jomae)
    * Fix so frontend.CommandLineInterface.run does not accumulate logging
      handlers (#227, reported with initial patch by dfraser)
    * Fix exception if environment contains an invalid locale setting (#200)
  - install python2 rather than python3 executable (#710880)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.5.4-1
changelog:
  - Update to 1.5.4
  - Fix for python3 module and anydbm
  - Tried enabling unittests on python3 -- still no joy


author: David Lehman <dlehman@redhat.com> - 0.8-1
changelog:
  - Check for "ip=ibft" cmdline option, not for "ibft". (rvykydal)
  - run_program returns an int. (#920584) (dlehman)
  - Fix units for lvs output. (dlehman)
  - Don't pass an intf arg to ISCSI.stabilize. (#920041) (dlehman)
  - Add __version__ to blivet/__init__.py. (dlehman)
  - Only run info prog (eg: dumpe2fs) once per filesystem. (dlehman)
  - Processing of a PV with no VG metadata is easy. (dlehman)
  - Add some convenience properties for displaying DeviceAction info. (dlehman)
  - Ignore MTDs, as we do not have the tools to write to them (#916771). (clumens)
  - Include udev's list of symbolic links in StorageDevice. (#914724) (dlehman)
  - Set a DeviceFormat instance's type attribute to the requested type. (dlehman)
  - Allow size specs that do not include a 'b' or 'B'. (#888851) (dlehman)
  - Fix reference to 'factory' from within DeviceFactory class. (dlehman)
  - Fix problems detecting lvm and md devices. (#914730) (dlehman)
  - Allow passing size=None to device factories for unbounded growth. (dlehman)
  - Provide a way to set the default fstype for a Blivet instance. (#838145) (dlehman)
  - Allow changing the size of encrypted devices via DeviceFactory. (#913169) (dlehman)
  - Don't dump storage state except in installer mode. (dlehman)
  - Fix device resolution for btrfs. (dlehman)
  - Fix device resolution to find named md devices. (dlehman)
  - Account for active mounts in normal mode. (#914898) (dlehman)
  - Add an example script which lists all devices. (dlehman)
  - Add scripts/makeupdates script (bcl)


author: Brian C. Lane <bcl@redhat.com> - 0.9-1
changelog:
  - NTFS.minSize is supposed to be a property. (#924410) (dlehman)
  - Mount /run during install and fix /sys mount (#922988) (bcl)
  - Fix two excptions triggered by calls to copy_to_system. (hamzy)


author: David Lehman <dlehman@redhat.com> - 0.10-1
changelog:
  - Extended partitions containing logical partitions are not leaves. (#949912) (dlehman)
  - Remove devices in reverse order in Blivet.recursiveRemove. (#949912) (dlehman)
  - Rewrite the DeviceFactory classes. (dlehman)
  - Hook up error handling in installer-specific methods. (#948250) (dlehman)
  - Don't traceback if fcoe.startup is called without fcoe utils present. (dlehman)
  - Fix logic error that causes us to ignore disks in exclusiveDisks. (dlehman)
  - Slightly improve currentSize for btrfs volumes. (dlehman)
  - Simplify multipath handling. (dlehman)
  - Don't expect anaconda udev rules to be in use. (dlehman)
  - Drop requires for things only needed for OS installation. (dlehman)
  - New version: 0.9 (bcl)
  - Only install packages for devices and filesystems used by the OS. (dlehman)
  - Fix LVMLogicalVolumeDevice.maxSize. (dlehman)
  - Fix handling of name=None in newLV, newMDArray, newVG. (dlehman)
  - Allow calls to suggestDeviceName with only a prefix argument. (dlehman)
  - Move mdadm superblock size calculation into devicelibs.mdraid. (dlehman)


author: Garrett Holmstrom <gholms@fedoraproject.org> - 2.13.3-1
changelog:
  - Updated to 2.13.3
  - Note that this version changes register_image's virtualization_type parameter
  - Fixed auto-scaling PropagateAtLaunch parsing (#1011682)


author: Cole Robinson <crobinso@redhat.com> - 0.7.0-1
changelog:
  - Rebased to version 0.7.0
  - Fix querying with latest Red Hat bugzilla
  - Bugzilla 4 API support
  - Improve querying non-RH bugzilla instances


author: Cole Robinson <crobinso@redhat.com> - 0.8.0-1
changelog:
  - Rebased to version 0.8.0
  - Drop most usage of non-upstream RH Bugzilla API
  - Test suite improvements, nearly complete code coverage
  - Fix all open bug reports and RFEs


author: Cole Robinson <crobinso@redhat.com> - 0.9.0-1
changelog:
  - Rebased to version 0.9.0
  - bugzilla: modify: add --dependson (Don Zickus)
  - bugzilla: new: add --groups option (Paul Frields)
  - bugzilla: modify: Allow setting nearly every bug parameter
  - NovellBugzilla implementation removed, can't get it to work
  - Gracefully handle private bugs (bz #963979)
  - Raise error if python-magic is needed (bz #951572)
  - CVE-2013-2191: Add SSL host and cert validation (bz #975961, bz #951594)


author: BJ Dierkes <wdierkes@rackspace.com> - 1.7.6.1-1
changelog:
  - Latest sources
  - Fixed Source0 to a usable URL
  - BR: python-nose, and run nosetests in %check
  - Added Patch0: broken_tests.patch.  Resolves GH#23
    https://github.com/rackspace/python-cloudfiles/issues#issue/23


author: Paul Howarth <paul@city-fan.org> - 2.5-1
changelog:
  - Update to 2.5
    - Added PKCS#1 encryption schemes (v1.5 and OAEP); we now have a decent,
      easy-to-use non-textbook RSA implementation
    - Added PKCS#1 signature schemes (v1.5 and PSS); v1.5 required some
      extensive changes to Hash modules to contain the algorithm-specific ASN.1
      OID, and to that end we now always have a (thin) Python module to hide the
      one in pure C
    - Added 2 standard Key Derivation Functions (PBKDF1 and PBKDF2)
    - Added export/import of RSA keys in OpenSSH and PKCS#8 formats
    - Added password-protected export/import of RSA keys (one old method for
      PKCS#8 PEM only)
    - Added ability to generate RSA key pairs with configurable public
      exponent e
    - Added ability to construct an RSA key pair even if only the private
      exponent d is known, and not p and q
    - Added SHA-2 C source code (fully from Lorenz Quack)
    - Unit tests for all the above
    - Updates to documentation (both inline and in Doc/pycrypt.rst)
    - Minor bug fixes (setup.py and tests)
  - Upstream no longer ships python-3-changes.txt


author: Paul Howarth <paul@city-fan.org> - 2.5-2
changelog:
  - Add upstream fixes for issues found by Dave Malcolm's experimental static
    analysis tool (#790584)


author: Paul Howarth <paul@city-fan.org> - 2.6-1
changelog:
  - Update to 2.6
    - Fix insecure ElGamal key generation (launchpad bug #985164, CVE-2012-2417)
    - Huge documentation cleanup
    - Added more tests, including test vectors from NIST 800-38A
    - Remove broken MODE_PGP, which never actually worked properly
    - A new mode, MODE_OPENPGP, has been added for people wishing to write
      OpenPGP implementations (see also launchpad bug #996814)
    - Fix: getPrime with invalid input causes Python to abort with fatal error
      (launchpad bug #988431)
    - Fix: Segfaults within error-handling paths (launchpad bug #934294)
    - Fix: Block ciphers allow empty string as IV (launchpad bug #997464)
    - Fix DevURandomRNG to work with Python3's new I/O stack
    - Remove automagic dependencies on libgmp and libmpir; let the caller
      disable them using args
    - Many other minor bug fixes and improvements
  - Drop upstream patches


author: Rahul Sundaram <sundaram@fedoraproject.org> - 1.5-1
changelog:
  - New upstream release
  - Fix UTF8 encoding correctly
  - Drop buildroot, clean, defattr and use macro for Source


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.5-2
changelog:
  - Make the python3 subpackage install first, so that django-admin
    doesn't get overwritten.
  - Don't own %{python3_sitelib} itself, but only its contents.


author: Miro Hrončok <mhroncok@redhat.com> - 1.5-3
changelog:
  - separated lang files for Python 2 and 3
  - list %files in Python 3 subpackage more precisely to not include locale files
  - added %doc to Python 3 subpackage
  - removed trailing slash after %{buildroot} to avoid double slash
  - fixed bogus dates in %changelog
  - made %check verbose, so it is not so boring to watch them run
  - created python3 doc package
  - created python3- prefixed symlink to manpage
  - comment added about shared content - manpages


author: Matthias Runge <mrunge@redhat.com> - 1.4.5-4
changelog:
  - removed references to ancient Fedora releases
  - included JQUERY-LICENSE.txt
  - removed bundled eggs and skipped tests requiring bundled eggs


author: Radek Novacek <rnovacek@redhat.com> 1.6.5-1
changelog:
  - Update to version 1.6.5
  - Change architecture to noarch
  - Change python_sitearch to python_sitelib
  - Changelog in no longer in source tarball
  - Remove nonpacked files


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.3.30-1
changelog:
  - Make TG's loginForm and CSRF's text translated from tg-apps (laxathom).
  - Fix a bug in fedora.tg.utils.tg_absolute_url
  - Add a lookup email parameter to gravatar lookups
  - Add an auth provider for flask


author: Jesse Keating <jkeating@redhat.com> - 0.5.4-1
changelog:
  - Upstream release to fix licensing issues
  - Use real upstream release instead of git checkout
  - No tests shipped in release, remove %check


author: Ding-Yi Chen <dchen at redhat.com> - 0.7.2-1
changelog:
  - Upstream update to 0.7.2
    Which may fixed http://code.google.com/p/httplib2/issues/detail?id=62
    Note this version uses fedora's cert file bundle instead of httplib2
    default.


author: Ding-Yi Chen <dchen at redhat.com> - 0.7.4-3
changelog:
  - Applied patch suggested by richardfearn@gmail.com regarding issue 208
  - Fixed: Bug 832344 - Certification validation fails due to multiple 'dns' entries in subjectAltName


author: Ding-Yi Chen <dchen at redhat.com> - 0.7.4-6
changelog:
  - Fixed Bug 840968 - SSL errors when the site certificate contains
    subjectAltName but DNS is not in it


author: Thomas Spura <tomspur@fedoraproject.org> - 0.13.1-3
changelog:
  - obsolete old Thu Feb 21 2013 python packages (José Matos, #882724)
  - notebook and gui subpackage require matplotlib not the console anymore (#872176)


author: Thomas Spura <tomspur@fedoraproject.org> - 0.13.1-4
changelog:
  - More changes to build for Python 3 (mostly by Andrew McNabb, #784947)
  - Update package structure of python3-ipython subpackage to match python2-ipython one's
  - enable python3 build of ipython
  - exclude pylab tests for now, as it is broken on python3


author: Thomas Spura <tomspur@fedoraproject.org> - 0.13.2-1
changelog:
  - update to 0.13.2 fixes #927169, #947633
  - run tests in xvfb
  - reword description of ipython-tests a bit


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.2.4-1
changelog:
  - Upstream update 0.2.4
    - Changes i18n.easy_gettext_setup() to return lgettext functions when
      byte strings are requested.


author: Mike Bonnet <mikeb@redhat.com> - 1.0.90-1
changelog:
  - return the contents of the AP_REP message from rd_rep()
  - improved memory handling
  - removed use of KRB_PRIVATE


author: Brian C. Lane <bcl@redhat.com> 0.58.3-1
changelog:
  - Upstream 0.58.3
  - Add python3-logilab-common subpackage to spec. Not ready to turn it on yet
    due to this upstream bug: http://www.logilab.org/ticket/110213


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.4-1
changelog:
  - Bugs fixed
  -
  -  * Crash when building an nsmap (Element property) with empty namespace
  -    URIs.
  -  * Crash due to race condition when errors (or user messages) occur during
  -    threaded XSLT processing (or compilation).
  -  * XSLT stylesheet compilation could ignore compilation errors.


author: Jeffrey Ollie <jeff@ocjtech.us> - 2.3.5-1
changelog:
  - Bugs fixed
  -
  -  * Crash when merging text nodes in element.remove().
  -  * Crash in sax/target parser when reporting empty doctype.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0-1
changelog:
  - 3.0 (2012-10-08)
  - ================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * End-of-file handling was incorrect in iterparse() when reading from
  -   a low-level C file stream and failed in libxml2 2.9.0 due to its
  -   improved consistency checks.
  -
  - Other changes
  - -------------
  -
  - * The build no longer uses Cython by default unless the generated C files
  -   are missing.  To use Cython, pass the option "--with-cython".  To ignore
  -   the fatal build error when Cython is required but not available (e.g. to
  -   run special setup.py commands that do not actually run a build), pass
  -   "--without-cython".
  -
  -
  - 3.0beta1 (2012-09-26)
  - =====================
  -
  - Features added
  - --------------
  -
  - * Python level access to (optional) libxml2 memory debugging features
  -   to simplify debugging of memory leaks etc.
  -
  - Bugs fixed
  - ----------
  -
  - * Fix a memory leak in XPath by switching to Cython 0.17.1.
  -
  - * Some tests were adapted to work with PyPy.
  -
  - Other changes
  - -------------
  -
  - * The code was adapted to work with the upcoming libxml2 2.9.0 release.
  -
  -
  - 3.0alpha2 (2012-08-23)
  - ======================
  -
  - Features added
  - --------------
  -
  - * The .iter() method of elements now accepts tag arguments like "{*}name"
  -   to search for elements with a given local name in any namespace.  With
  -   this addition, all combinations of wildcards now work as expected:
  -   "{ns}name", "{}name", "{*}name", "{ns}*", "{}*" and "{*}*".  Note that
  -   "name" is equivalent to "{}name", but "*" is "{*}*".  The same change
  -   applies to the .getiterator(), .itersiblings(), .iterancestors(),
  -   .iterdescendants(), .iterchildren() and .itertext() methods,  the
  -   strip_attributes(), strip_elements() and strip_tags() functions as well
  -   as the iterparse() function.
  -
  - * C14N allows specifying the inclusive prefixes to be promoted to
  -   top-level during exclusive serialisation.
  -
  - Bugs fixed
  - ----------
  -
  - * Passing long Unicode strings into the feed() parser interface failed to
  -   read the entire string.
  -
  - Other changes
  - -------------
  -
  -
  - 3.0alpha1 (2012-07-31)
  - ======================
  -
  - Features added
  - --------------
  -
  - * Initial support for building in PyPy (through cpyext).
  -
  - * DTD objects gained an API that allows read access to their
  -   declarations.
  -
  - * xpathgrep.py gained support for parsing line-by-line (e.g.
  -   from grep output) and for surrounding the output with a new root
  -   tag.
  -
  - * E-factory in lxml.builder accepts subtypes of known data
  -   types (such as string subtypes) when building elements around them.
  -
  - * Tree iteration and iterparse() with a selective tag
  -   argument supports passing a set of tags.  Tree nodes will be
  -   returned by the iterators if they match any of the tags.
  -
  - Bugs fixed
  - ----------
  -
  - * The .find*() methods in lxml.objectify no longer use XPath
  -   internally, which makes them faster in many cases (especially when
  -   short circuiting after a single or couple of elements) and fixes
  -   some behavioural differences compared to lxml.etree.  Note that
  -   this means that they no longer support arbitrary XPath expressions
  -   but only the subset that the ElementPath language supports.
  -   The previous implementation was also redundant with the normal
  -   XPath support, which can be used as a replacement.
  -
  - * el.find('*') could accidentally return a comment or processing
  -   instruction that happened to be in the wrong spot.  (Same for the
  -   other .find*() methods.)
  -
  - * The error logging is less intrusive and avoids a global setup where
  -   possible.
  -
  - * Fixed undefined names in html5lib parser.
  -
  - * xpathgrep.py did not work in Python 3.
  -
  - * Element.attrib.update() did not accept an attrib of
  -   another Element as parameter.
  -
  - * For subtypes of ElementBase that make the .text or .tail
  -   properties immutable (as in objectify, for example), inserting text
  -   when creating Elements through the E-Factory feature of the class
  -   constructor would fail with an exception, stating that the text
  -   cannot be modified.
  -
  - Other changes
  - --------------
  -
  - * The code base was overhauled to properly use 'const' where the API
  -   of libxml2 and libxslt requests it.  This also has an impact on the
  -   public C-API of lxml itself, as defined in etreepublic.pxd, as
  -   well as the provided declarations in the lxml/includes/ directory.
  -   Code that uses these declarations may have to be adapted.  On the
  -   plus side, this fixes several C compiler warnings, also for user
  -   code, thus making it easier to spot real problems again.
  -
  - * The functionality of "lxml.cssselect" was moved into a separate PyPI
  -   package called "cssselect".  To continue using it, you must install
  -   that package separately.  The "lxml.cssselect" module is still
  -   available and provides the same interface, provided the "cssselect"
  -   package can be imported at runtime.
  -
  - * Element attributes passed in as an attrib dict or as keyword
  -   arguments are now sorted by (namespaced) name before being created
  -   to make their order predictable for serialisation and iteration.
  -   Note that adding or deleting attributes afterwards does not take
  -   that order into account, i.e. setting a new attribute appends it
  -   after the existing ones.
  -
  - * Several classes that are for internal use only were removed
  -   from the lxml.etree module dict:
  -   _InputDocument, _ResolverRegistry, _ResolverContext, _BaseContext,
  -   _ExsltRegExp, _IterparseContext, _TempStore, _ExceptionContext,
  -   __ContentOnlyElement, _AttribIterator, _NamespaceRegistry,
  -   _ClassNamespaceRegistry, _FunctionNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _ParserContext, _PythonSaxParserTarget,
  -   _TargetParserContext, _ReadOnlyProxy, _ReadOnlyPIProxy,
  -   _ReadOnlyEntityProxy, _ReadOnlyElementProxy, _OpaqueNodeWrapper,
  -   _OpaqueDocumentWrapper, _ModifyContentOnlyProxy,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _SaxParserContext, _FilelikeWriter,
  -   _ParserSchemaValidationContext, _XPathContext,
  -   _XSLTResolverContext, _XSLTContext, _XSLTQuotedStringParam
  -
  - * Several internal classes can no longer be inherited from:
  -   _InputDocument, _ResolverRegistry, _ExsltRegExp, _ElementUnicodeResult,
  -   _IterparseContext, _TempStore, _AttribIterator, _ClassNamespaceRegistry,
  -   _XPathFunctionNamespaceRegistry, _ParserDictionaryContext,
  -   _FileReaderContext, _PythonSaxParserTarget, _TargetParserContext,
  -   _ReadOnlyPIProxy, _ReadOnlyEntityProxy, _OpaqueDocumentWrapper,
  -   _ModifyContentOnlyPIProxy, _ModifyContentOnlyEntityProxy,
  -   _AppendOnlyElementProxy, _FilelikeWriter, _ParserSchemaValidationContext,
  -   _XPathContext, _XSLTResolverContext, _XSLTContext,
  -   _XSLTQuotedStringParam, _XSLTResultTree, _XSLTProcessingInstruction


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.0.1-1
changelog:
  - 3.0.1 (2012-10-14)
  - Bugs fixed
  -
  -  * LP#1065924: Element proxies could disappear during garbage collection
  -    in PyPy without proper cleanup.
  -  * GH#71: Failure to work with libxml2 2.6.x.
  -  * LP#1065139: static MacOS-X build failed in Py3.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.1.0-1
changelog:
  - 3.1.0 (2013-02-10)
  - ==================
  -
  - Features added
  - --------------
  -
  - * GH#89: lxml.html.clean allows overriding the set of attributes that it
  -   considers 'safe'.  Patch by Francis Devereux.
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1104370: ``copy.copy(el.attrib)`` raised an exception.  It now returns
  -   a copy of the attributes as a plain Python dict.
  -
  - * GH#95: When used with namespace prefixes, the  ``el.find*()`` methods
  -   always used the first namespace mapping that was provided for each
  -   path expression instead of using the one that was actually passed
  -   in for the current run.
  -
  - * LP#1092521, GH#91: Fix undefined C symbol in Python runtimes compiled
  -   without threading support.  Patch by Ulrich Seidl.
  -
  - Other changes
  - -------------
  -
  -
  - 3.1beta1 (2012-12-21)
  - =====================
  -
  - Features added
  - --------------
  -
  - * New build-time option ``--with-unicode-strings`` for Python 2 that
  -   makes the API always return Unicode strings for names and text
  -   instead of byte strings for plain ASCII content.
  -
  - * New incremental XML file writing API ``etree.xmlfile()``.
  -
  - * E factory in lxml.objectify is callable to simplify the creation of
  -   tags with non-identifier names without having to resort to getattr().
  -
  - Bugs fixed
  - ----------
  -
  - * When starting from a non-namespaced element in lxml.objectify, searching
  -   for a child without explicitly specifying a namespace incorrectly found
  -   namespaced elements with the requested local name, instead of restricting
  -   the search to non-namespaced children.
  -
  - * GH#85: Deprecation warnings were fixed for Python 3.x.
  -
  - * GH#33: lxml.html.fromstring() failed to accept bytes input in Py3.
  -
  - * LP#1080792: Static build of libxml2 2.9.0 failed due to missing file.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``_ObjectifyElementMakerCaller`` was
  -   removed from the module API of lxml.objectify.
  -
  - * LP#1075622: lxml.builder is faster for adding text to elements with
  -   many children.  Patch by Anders Hammarquist.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.0-1
changelog:
  - 3.2.0 (2013-04-28)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#690319: Leading whitespace could change the behaviour of the string
  -   parsing functions in ``lxml.html``.
  -
  - * LP#599318: The string parsing functions in ``lxml.html`` are more robust
  -   in the face of uncommon HTML content like framesets or missing body tags.
  -   Patch by Stefan Seelmann.
  -
  - * LP#712941: I/O errors while trying to access files with paths that
  -   contain non-ASCII characters could raise ``UnicodeDecodeError`` instead
  -   of properly reporting the ``IOError``.
  -
  - * LP#673205: Parsing from in-memory strings disabled network access in the
  -   default parser and made subsequent attempts to parse from a URL fail.
  -
  - * LP#971754: lxml.html.clean appends 'nofollow' to 'rel' attributes instead
  -   of overwriting the current value.
  -
  - * LP#715687: lxml.html.clean no longer discards scripts that are explicitly
  -   allowed by the user provided whitelist.  Patch by Christine Koppelt.
  -
  - 3.1.2 (2013-04-12)
  - ==================
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1136509: Passing attributes through the namespace-unaware API of
  -   the sax bridge (i.e. the ``handler.startElement()`` method) failed
  -   with a ``TypeError``.  Patch by Mike Bayer.
  -
  - * LP#1123074: Fix serialisation error in XSLT output when converting
  -   the result tree to a Unicode string.
  -
  - * GH#105: Replace illegal usage of ``xmlBufLength()`` in libxml2 2.9.0
  -   by properly exported API function ``xmlBufUse()``.
  -
  - 3.1.1 (2013-03-29)
  - ==================
  -
  - Features added
  - --------------
  -
  - Bugs fixed
  - ----------
  -
  - * LP#1160386: Write access to ``lxml.html.FormElement.fields`` raised
  -   an AttributeError in Py3.
  -
  - * Illegal memory access during cleanup in incremental xmlfile writer.
  -
  - Other changes
  - -------------
  -
  - * The externally useless class ``lxml.etree._BaseParser`` was removed
  -   from the module dict.


author: Jeffrey Ollie <jeff@ocjtech.us> - 3.2.1-1
changelog:
  - 3.2.1 (2013-05-11)
  - ==================
  -
  - Features added
  - --------------
  -
  - * The methods ``apply_templates()`` and ``process_children()`` of XSLT
  -   extension elements have gained two new boolean options ``elements_only``
  -   and ``remove_blank_text`` that discard either all strings or
  -   whitespace-only strings from the result list.
  -
  - Bugs fixed
  - ----------
  -
  - * When moving Elements to another tree, the namespace cleanup mechanism
  -   no longer drops namespace prefixes from attributes for which it finds
  -   a default namespace declaration, to prevent them from appearing as
  -   unnamespaced attributes after serialisation.
  -
  - * Returning non-type objects from a custom class lookup method could lead
  -   to a crash.
  -
  - * Instantiating and using subtypes of Comments and ProcessingInstructions
  -   crashed.


author: Jan Kaluza <jkaluza@redhat.com> - 5.11-1
changelog:
  - fix #796130 - update to file-5.11
  - fix #796209 - recognize VDI images
  - fix #795709 - recognize QED images


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.18-1
changelog:
  - Handle tracebacks with no stack (#866441) (vpodzime)
  - Parse component name correctly (#866526) (vpodzime)
  - Spelling corrections (#865993) (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.19-1
changelog:
  - Add test for handling unicode strings and files (vpodzime)
  - Read files as UTF-8 and ignore errors (#874250) (vpodzime)
  - Add %check section to the spec file (vpodzime)
  - Fix tests (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.21-1
changelog:
  - New purely textual text interface (vpodzime)
  - Add dumb enableNetwork implementation to GraphicalIntf (vpodzime)
  - Destroy main window after running it (vpodzime)
  - Get rid of the accountManager and use new libreport API (vpodzime)
  - Add a way to override previously registered callback (vpodzime)
  - Allow callbacks marked as attachment only (vpodzime)
  - Add support for callbacks providing additional data (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.22-1
changelog:
  - Some more stuff for ABRT/libreport (#929181) (vpodzime)
  - Tell ABRT we are reporting a Python excetion (vpodzime)
  - Use named tuples instead of our magic tuples (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.23-1
changelog:
  - Use Sphinx syntax for docstrings (vpodzime)
  - Allow a change of the I/O functions (vpodzime)
  - Reword the 'Debug' button warning (#948256) (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.25-1
changelog:
  - Add and use the safe_string module and the SafeStr class (vpodzime)
  - Give translators hint about the cryptic strings (vpodzime)


author: Vratislav Podzimek <vpodzime@redhat.com> - 0.26-1
changelog:
  - Output binary data correctly as hexa strings (#986515) (vpodzime)
  - Add newline before dumping callbacks' outputs (vpodzime)


author: David Malcolm <dmalcolm@redhat.com> - 1.1.2-5
changelog:
  - rebuild for https://fedoraproject.org/wiki/Features/Python_3.3
  - disable selftests that fail under 3.3


author: John Dennis <jdennis@redhat.com> - 0.11-1
changelog:
  * Better support for IPv6

    * Add AddrInfo class to support IPv6 address resolution. Supports
      iteration over it's set of NetworkAddress objects and provides
      hostname, canonical_name object properties.

    * Add PR_AI_* constants.

    * NetworkAddress constructor and NetworkAddress.set_from_string() added
      optional family parameter. This is necessary for utilizing
      PR_GetAddrInfoByName().

    * NetworkAddress initialized via a string paramter are now initalized via
      PR_GetAddrInfoByName using family.

    * Add NetworkAddress.address property to return the address sans the
      port as a string. NetworkAddress.str() includes the port. For IPv6 the
      a hex string must be enclosed in brackets if a port is appended to it,
      the bracketed hex address with appended with a port is unappropriate
      in some circumstances, hence the new address property to permit either
      the address string with a port or without a port.

    * Fix the implementation of the NetworkAddress.family property, it was
      returning bogus data due to wrong native data size.

    * HostEntry objects now support iteration and indexing of their
      NetworkAddress members.

    * Add io.addr_family_name() function to return string representation of
      PR_AF_* constants.

    * Modify example and test code to utilize AddrInfo instead of deprecated
      NetworkAddress functionality. Add address family command argument to
      ssl_example.

    * Fix pty import statement in test/setup_certs.py

      Deprecated Functionality:
      -------------------------

    * NetworkAddress initialized via a string paramter is now
      deprecated. AddrInfo should be used instead.

    * NetworkAddress.set_from_string is now deprecated. AddrInfo should be
      used instead.

    * NetworkAddress.hostentry is deprecated. It was a bad idea,
      NetworkAddress objects can support both IPv4 and IPv6, but a HostEntry
      object can only support IPv4. Plus the implementation depdended on
      being able to perform a reverse DNS lookup which is not always
      possible.

    * HostEntry.get_network_addresses() and HostEntry.get_network_address()
      are now deprecated. In addition their port parameter is now no longer
      respected. HostEntry objects now support iteration and
      indexing of their NetworkAddress and that should be used to access
      their NetworkAddress objects instead.


author: John Dennis <jdennis@redhat.com> - 0.11-2
changelog:
  - Resolves: #689059
    Add family parameter to Socket constructors in examples and doc.
    Mark implicit family parameter as deprecated.
    Raise exception if Socket family does not match NetworkAddress family.
    Add --server-subject to setup_certs.py (made testing IPv6 easier without DNS)


author: John Dennis <jdennis@redhat.com> - 0.12-1
changelog:
  * Major new enhancement is additon of PKCS12 support and
      AlgorithmID's.

    * setup.py build enhancements
      - Now searches for the NSS and NSPR header files rather
        than hardcoding their location. This makes building friendlier
        on other systems (i.e. debian)
      - Now takes optional command line arguments, -d or --debug
        will turn on debug options during the build.

    * Fix reference counting bug in PK11_password_callback() which
      contributed to NSS not being able to shutdown due to
      resources still in use.

    * Add UTF-8 support to ssl.config_server_session_id_cache()

    * Added unit tests for cipher, digest, client_server.

    * All unittests now run, added test/run_tests to invoke
      full test suite.

    * Fix bug in test/setup_certs.py, hardcoded full path to
      libnssckbi.so was causing failures on 64-bit systems,
      just use the libnssckbi.so basename, modutil will find
      it on the standard search path.

    * doc/examples/cert_dump.py uses new AlgorithmID class to
      dump Signature Algorithm

    * doc/examples/ssl_example.py now can cleanly shutdown NSS.

    * Exception error messages now include PR error text if available.

    * The following classes were replaced:
      - SignatureAlgorithm replaced by new class AlgorithmID

    * The following classes were added:
      - AlgorithmID
      - PKCS12DecodeItem
      - PKCS12Decoder

    * The following class methods were added:
      - PK11Slot.authenticate()
      - PK11Slot.get_disabled_reason()
      - PK11Slot.has_protected_authentication_path()
      - PK11Slot.has_root_certs()
      - PK11Slot.is_disabled()
      - PK11Slot.is_friendly()
      - PK11Slot.is_internal()
      - PK11Slot.is_logged_in()
      - PK11Slot.is_removable()
      - PK11Slot.logout()
      - PK11Slot.need_login()
      - PK11Slot.need_user_init()
      - PK11Slot.user_disable()
      - PK11Slot.user_enable()
      - PKCS12DecodeItem.format()
      - PKCS12DecodeItem.format_lines()
      - PKCS12Decoder.database_import()
      - PKCS12Decoder.format()
      - PKCS12Decoder.format_lines()

    * The following class properties were added:
      - AlgorithmID.id_oid
      - AlgorithmID.id_str
      - AlgorithmID.id_tag
      - AlgorithmID.parameters
      - PKCS12DecodeItem.certificate
      - PKCS12DecodeItem.friendly_name
      - PKCS12DecodeItem.has_key
      - PKCS12DecodeItem.shroud_algorithm_id
      - PKCS12DecodeItem.signed_cert_der
      - PKCS12DecodeItem.type
      - SignedData.data
      - SignedData.der

    * The following module functions were added:
      - nss.nss.dump_certificate_cache_info()
      - nss.nss.find_slot_by_name()
      - nss.nss.fingerprint_format_lines()
      - nss.nss.get_internal_slot()
      - nss.nss.is_fips()
      - nss.nss.need_pw_init()
      - nss.nss.nss_init_read_write()
      - nss.nss.pk11_disabled_reason_name()
      - nss.nss.pk11_disabled_reason_str()
      - nss.nss.pk11_logout_all()
      - nss.nss.pkcs12_cipher_from_name()
      - nss.nss.pkcs12_cipher_name()
      - nss.nss.pkcs12_enable_all_ciphers()
      - nss.nss.pkcs12_enable_cipher()
      - nss.nss.pkcs12_export()
      - nss.nss.pkcs12_map_cipher()
      - nss.nss.pkcs12_set_nickname_collision_callback()
      - nss.nss.pkcs12_set_preferred_cipher()
      - nss.nss.token_exists()
      - nss.ssl.config_mp_server_sid_cache()
      - nss.ssl.config_server_session_id_cache_with_opt()
      - nss.ssl.get_max_server_cache_locks()
      - nss.ssl.set_max_server_cache_locks()
      - nss.ssl.shutdown_server_session_id_cache()

    * The following constants were added:
      - nss.nss.int.PK11_DIS_COULD_NOT_INIT_TOKEN
      - nss.nss.int.PK11_DIS_NONE
      - nss.nss.int.PK11_DIS_TOKEN_NOT_PRESENT
      - nss.nss.int.PK11_DIS_TOKEN_VERIFY_FAILED
      - nss.nss.int.PK11_DIS_USER_SELECTED
      - nss.nss.int.PKCS12_DES_56
      - nss.nss.int.PKCS12_DES_EDE3_168
      - nss.nss.int.PKCS12_RC2_CBC_128
      - nss.nss.int.PKCS12_RC2_CBC_40
      - nss.nss.int.PKCS12_RC4_128
      - nss.nss.int.PKCS12_RC4_40

    * The following files were added:
      - test/run_tests
      - test/test_cipher.py (replaces cipher_test.py)
      - test/test_client_server.py
      - test/test_digest.py (replaces digest_test.py)
      - test/test_pkcs12.py

    * The following were deprecated:
      - SignatureAlgorithm


author: John Dennis <jdennis@redhat.com> - 0.12-2
changelog:
  - add patch python-nss-0.12-rsapssparams.patch to fix build problem
    which appears only with nss 3.13 and later.


author: John Dennis <jdennis@redhat.com> - 0.13-0
changelog:
  - Update to version 0.13
    Introduced in 0.13:

    * Fix NSS SECITEM_CompareItem bug via workaround.

    * Fix incorrect format strings in PyArg_ParseTuple* for:
      - GeneralName
      - BasicConstraints
      - cert_x509_key_usage

    * Fix bug when decoding certificate BasicConstraints extension

    * Fix hang in setup_certs.

    * For NSS >= 3.13 support CERTDB_TERMINAL_RECORD

    * You can now query for a specific certificate extension
      Certficate.get_extension()

    * The following classes were added:
      - RSAGenParams

    * The following class methods were added:
      - nss.nss.Certificate.get_extension
      - nss.nss.PK11Slot.generate_key_pair
      - nss.nss.DSAPublicKey.format
      - nss.nss.DSAPublicKey.format_lines

    * The following module functions were added:
      - nss.nss.pub_wrap_sym_key

    * The following internal utilities were added:
      - PyString_UTF8
      - SecItem_new_alloc()

    * The following class constructors were modified to accept
      intialization parameters

      - KEYPQGParams (DSA generation parameters)

    * The PublicKey formatting (i.e. format_lines) was augmented
      to format DSA keys (formerly it only recognized RSA keys).

    * Allow lables and values to be justified when printing objects

    * The following were deprecated:
      - nss.nss.make_line_pairs (replaced by nss.nss.make_line_fmt_tuples)

      Deprecated Functionality:
      -------------------------
      - make_line_pairs() has been replaced by make_line_fmt_tuples()
        because 2-valued tuples were not sufficently general. It is
        expected very few programs will have used this function, it's mostly
        used internally but provided as a support utility.


author: John Dennis <jdennis@redhat.com> - 0.14-1
changelog:
  External Changes:
    -----------------

    The primary enhancements in this version is support of certifcate
    validation, OCSP support, and support for the certificate "Authority
    Information Access" extension.

    Enhanced certifcate validation including CA certs can be done via
    Certificate.verify() or Certificate.is_ca_cert(). When cert
    validation fails you can now obtain diagnostic information as to why
    the cert failed to validate. This is encapsulated in the
    CertVerifyLog class which is a iterable collection of
    CertVerifyLogNode objects. Most people will probablby just print the
    string representation of the returned CertVerifyLog object. Cert
    validation logging is handled by the Certificate.verify() method.
    Support has also been added for the various key usage and cert type
    entities which feature prominently during cert validation.


    * Certificate() constructor signature changed from

      Certificate(data=None, der_is_signed=True)

      to

      Certificate(data, certdb=cert_get_default_certdb(), perm=False, nickname=None)

      This change was necessary because all certs should be added to the
      NSS temporary database when they are loaded, but earlier code
      failed to to that. It's is not likely that an previous code was
      failing to pass initialization data or the der_is_signed flag so
      this change should be backwards compatible.

    * Fix bug #922247, PKCS12Decoder.database_import() method. Importing into
      a NSS database would sometimes fail or segfault.

    * Error codes and descriptions were updated from upstream NSPR & NSS.

    * The password callback did not allow for breaking out of a password
      prompting loop, now if None is returned from the password callback
      the password prompting is terminated.

    * nss.nss_shutdown_context now called from InitContext destructor,
      this assures the context is shutdown even if the programmer forgot
      to. It's still best to explicitly shut it down, this is just
      failsafe.

    * Support was added for shutdown callbacks.

    * The following classes were added:
      - nss.CertVerifyLogNode
      - nss.CertVerifyLog
      - error.CertVerifyError (exception)
      - nss.AuthorityInfoAccess
      - nss.AuthorityInfoAccesses


    * The following class methods were added:
      - nss.Certificate.is_ca_cert
      - nss.Certificate.verify
      - nss.Certificate.verify_with_log
      - nss.Certificate.get_cert_chain
      - nss.Certificate.check_ocsp_status
      - nss.PK11Slot.list_certs
      - nss.CertVerifyLogNode.format_lines
      - nss.CertVerifyLog.format_lines
      - nss.CRLDistributionPts.format_lines

    * The following class properties were added:
      - nss.CertVerifyLogNode.certificate
      - nss.CertVerifyLogNode.error
      - nss.CertVerifyLogNode.depth
      - nss.CertVerifyLog.count

    * The following module functions were added:
      - nss.x509_cert_type
      - nss.key_usage_flags
      - nss.list_certs
      - nss.find_certs_from_email_addr
      - nss.find_certs_from_nickname
      - nss.nss_get_version
      - nss.nss_version_check
      - nss.set_shutdown_callback
      - nss.get_use_pkix_for_validation
      - nss.set_use_pkix_for_validation
      - nss.enable_ocsp_checking
      - nss.disable_ocsp_checking
      - nss.set_ocsp_cache_settings
      - nss.set_ocsp_failure_mode
      - nss.set_ocsp_timeout
      - nss.clear_ocsp_cache
      - nss.set_ocsp_default_responder
      - nss.enable_ocsp_default_responder
      - nss.disable_ocsp_default_responder

    * The following files were added:
        src/py_traceback.h
        doc/examples/verify_cert.py
        test/test_misc.py

    * The following constants were added:
      - nss.KU_DIGITAL_SIGNATURE
      - nss.KU_NON_REPUDIATION
      - nss.KU_KEY_ENCIPHERMENT
      - nss.KU_DATA_ENCIPHERMENT
      - nss.KU_KEY_AGREEMENT
      - nss.KU_KEY_CERT_SIGN
      - nss.KU_CRL_SIGN
      - nss.KU_ENCIPHER_ONLY
      - nss.KU_ALL
      - nss.KU_DIGITAL_SIGNATURE_OR_NON_REPUDIATION
      - nss.KU_KEY_AGREEMENT_OR_ENCIPHERMENT
      - nss.KU_NS_GOVT_APPROVED
      - nss.PK11CertListUnique
      - nss.PK11CertListUser
      - nss.PK11CertListRootUnique
      - nss.PK11CertListCA
      - nss.PK11CertListCAUnique
      - nss.PK11CertListUserUnique
      - nss.PK11CertListAll
      - nss.certUsageSSLClient
      - nss.certUsageSSLServer
      - nss.certUsageSSLServerWithStepUp
      - nss.certUsageSSLCA
      - nss.certUsageEmailSigner
      - nss.certUsageEmailRecipient
      - nss.certUsageObjectSigner
      - nss.certUsageUserCertImport
      - nss.certUsageVerifyCA
      - nss.certUsageProtectedObjectSigner
      - nss.certUsageStatusResponder
      - nss.certUsageAnyCA
      - nss.ocspMode_FailureIsVerificationFailure
      - nss.ocspMode_FailureIsNotAVerificationFailure

    * cert_dump.py extended to print NS_CERT_TYPE_EXTENSION

    * cert_usage_flags, nss_init_flags now support optional repr_kind parameter

    Internal Changes:
    -----------------

    * Reimplement exception handling
      - NSPRError is now derived from StandardException instead of
        EnvironmentError. It was never correct to derive from
        EnvironmentError but was difficult to implement a new subclassed
        exception with it's own attributes, using EnvironmentError had
        been expedient.

      - NSPRError now derived from StandardException, provides:
        * errno (numeric error code)
        * strerror (error description associated with error code)
        * error_message (optional detailed message)
        * error_code (alias for errno)
        * error_desc (alias for strerror)

      - CertVerifyError derived from NSPRError, extends with:
        * usages (bitmask of returned usages)
        * log (CertVerifyLog object)

    * Expose error lookup to sibling modules

    * Use macros for bitmask_to_list functions to reduce code
      duplication and centralize logic.

    * Add repr_kind parameter to cert_trust_flags_str()

    * Add support for repr_kind AsEnumName to bitstring table lookup.

    * Add cert_type_bitstr_to_tuple() lookup function

    * Add PRTimeConvert(), used to convert Python time values
      to PRTime, centralizes conversion logic, reduces duplication

    * Add UTF8OrNoneConvert to better handle unicode parameters which
      are optional.

    * Add Certificate_summary_format_lines() utility to generate
      concise certificate identification info for output.

    * Certificate_new_from_CERTCertificate now takes add_reference parameter
      to properly reference count certs, should fix shutdown busy problems.

    * Add print_traceback(), print_cert() debugging support.


author: Ralph Bean <rbean@redhat.com> - 0.0.4-1
changelog:
  - Latest upstream
  - Fix for https://bugzilla.redhat.com/show_bug.cgi?id=836514
  - More precise file naming
  - Source0 url on PyPI.


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.6-1
changelog:
  - v1.7.6 (Fanny) 1nov09
  - ---------------------
  -  * fixed bugs 411099 (sftp chdir isn't unicode-safe), 363163 & 411910 (more
  -    IPv6 problems on windows), 413850 (race when server closes the channel),
  -    426925 (support port numbers in host keys)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.6-3
changelog:
  - Patch to address deprecation warning from pycrypto
  - Simplify build as shown in new python guidelines
  - Enable test suite


author: Jeffrey C. Ollie <jeff@ocjtech.us> - 1.7.7.1-1
changelog:
  - v1.7.7.1 (George) 21may11
  - -------------------------
  -   * Make the verification phase of SFTP.put optional (Larry Wright)
  -   * Patches to fix AIX support (anonymous)
  -   * Patch from Michele Bertoldi to allow compression to be turned on in the
  -     client constructor.
  -   * Patch from Shad Sharma to raise an exception if the transport isn't active
  -     when you try to open a new channel.
  -   * Stop leaking file descriptors in the SSH agent (John Adams)
  -   * More fixes for Windows address family support (Andrew Bennetts)
  -   * Use Crypto.Random rather than Crypto.Util.RandomPool
  -     (Gary van der Merwe, #271791)
  -   * Support for openssl keys (tehfink)
  -   * Fix multi-process support by calling Random.atfork (sugarc0de)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.5.1-3
changelog:
  - Ugh.  Enable unittests and make a note that the python3 module is totally
    non-functional.  Open a bug for that for the actual package maintainers to
    make a decision on.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.7.5.1-4.20111221hg1498
changelog:
  - Tarball is missing files, use a snapshot to get those files and also pick up
    several bug fixes (one related to serving CGI scripts, another for http
    Continue requests, and a third regarding digest authentication and internet
    explorer)


author: Sandro Mani <manisandro@gmail.com> - 2.0.0-2.git2e88848
changelog:
  - Update to latest git
  - Remove python-pillow-disable-test.patch, gcc is now fixed
  - Add python-pillow_tempfile.patch to prevent a temporary file from getting packaged


author: Sandro Mani <manisandro@gmail.com> - 2.0.0-6.gitd1c6db8
changelog:
  - Update to latest git
  - python-pillow_quantization.patch now upstream
  - python-pillow_endianness.patch now upstream
  - Add subpackage for ImageQt module, with correct dependencies
  - Add PyQt4 and numpy BR (for generating docs / running tests)


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.0.0-7.gitd1c6db8
changelog:
  - Remove Obsoletes in the python-pillow-qt subpackage. Obsoletes isn't
    appropriate since qt support didn't exist in the previous python-pillow
    package so there's no reason to drag in python-pillow-qt when updating
    python-pillow.


author: Kamil Dudka <kdudka@redhat.com> - 7.19.0-15
changelog:
  - allow to return -1 from the write callback (#857875) 
  - remove the patch for curl-config --static-libs no longer needed
  - run the tests against the just built pycurl, not the system one


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.14.1-4
changelog:
  - Let brp_python_bytecompile run again, take care of the non-python{2,3} modules
    by removing them from the python{,3}-requests package that they did not belong
    in.
  - Use the certificates in the ca-certificates package instead of the bundled one
    + https://bugzilla.redhat.com/show_bug.cgi?id=904614
  - Fix a problem with cookie handling
    + https://bugzilla.redhat.com/show_bug.cgi?id=906924


author: Ralph Bean <rbean@redhat.com> - 1.1.0-1
changelog:
  - Latest upstream.
  - Relicense to ASL 2.0 with upstream.
  - Removed cookie handling patch (fixed in upstream tarball).
  - Updated cert unbundling patch to match upstream.
  - Added check section, but left it commented out for koji.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-2
changelog:
  - Unbundled python-charade/chardet.  Using system python-chardet now.
  - Removed deprecated comments and actions against oauthlib unbundling.
    Those are no longer necessary in 1.1.0.
  - Added links to bz tickets over Patch declarations.


author: Ralph Bean <rbean@redhat.com> - 1.1.0-3
changelog:
  - Unbundled python-urllib3.  Using system python-urllib3 now.
  - Conditionally include python-ordereddict for el6.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 0.6.28-1
changelog:
  - New upstream release:
    - python-3.3 fixes
    - honor umask when setuptools is used to install other modules


author: Thomas Spura <tomspur@fedoraproject.org> - 0.6-3
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Features/Python_2.7/MassRebuild
  - missing BR: python-devel


author: Toshio Kuratomi <toshio@fedoraproject.org> - 2.6.0-1
changelog:
  - Update to 2.6.0 which changes some messages thrown by exceptions to match
    with json module in python3.3 stdlib.  Probably safe for older releases but
    the python3 version there is 3.2 so there's also not any real need yet.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 3.1.0-1
changelog:
  - Update to 3.1.0 in Rawhide.
  - Build the python3 subpackage
  - Update to new-style filtering of provides


author: Nils Philippsen <nils@redhat.com> - 0.2.17-1
changelog:
  - fix default timeouts of None in bus objects (#716620)
  - reduce proxy method calling overhead a bit more


author: Nils Philippsen <nils@redhat.com> - 0.2.19-1
changelog:
  - allow service object methods to be called locally
  - preserve signature, docstrings, etc. of decorated methods


author: Nils Philippsen <nils@redhat.com> - 0.4.0-1
changelog:
  - version 0.4.0:
    - get rid of (ancient) PolicyKit-0.x support
    - add basic (experimental, unstable) dbus introspection support
    - learn to cope with polkitd being restarted


author: Zdeněk Pavlas <zpavlas@redhat.com> - 3.9.1-25
changelog:
  - Update to latest HEAD.
  - fix some test cases that were failing.  BZ 918658
  - exit(1) or /bin/urlgrabber failures.  BZ 918613
  - clamp timestamps from the future.  BZ 894630
  - enable GSSNEGOTIATE if implemented correctly.
  - make error messages more verbose.


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-26
changelog:
  - Update to latest HEAD.
  - Handle HTTP 200 response to range requests correctly.  BZ 919076
  - Reset curl_obj to clear CURLOPT_RANGE from previous requests.  BZ 923951


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-28
changelog:
  - Update to latest HEAD.
  - Add the "minrate" option. BZ 964298
  - Workaround progress "!!!" end for file:// repos.
  - add URLGrabError.code to the external downloader API
  - Disable GSSNEGOTIATE to work around a curl bug.  BZ 960163


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-29
changelog:
  - Update to latest HEAD.
  - Fix parsing of FTP 213 responses
  - Switch to max_connections=1 after timing out.  BZ 853432
  - max_connections=0 should imply the default limit.


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-31
changelog:
  - Update to latest HEAD.
  - add ftp_disable_epsv option. BZ 849177
  - Spelling fixes.
  - docs: throttling is per-connection, suggest max_connections=1. BZ 998263
  - More robust "Content-Length" parsing. BZ 1000841


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.9.1-32
changelog:
  - Update to latest HEAD.
  - Switch to max_connections=1 after refused connect. BZ 853432
  - Never display negative downloading speed. BZ 1001767


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.10-0
changelog:
  - Update to latest HEAD.
  - clamp timestamps from the future.  BZ 894630, 1013733
  - Fix the condition to enter single-connection mode. BZ 853432
  - Fix unit tests


author: Ralph Bean <rbean@redhat.com> - 1.5-3
changelog:
  - Renamed patches to python-urllib3-*
  - Fixed ssl check patch to use the correct cert path for Fedora.
  - Included dependency on ca-certificates
  - Cosmetic indentation changes to the .spec file.


author: Ralph Bean <rbean@redhat.com> - 1.5-4
changelog:
  - Upstream patch to fix Accept header when behind a proxy.
  - Reorganize patch numbers to more clearly distinguish them.


author: Ralph Bean <rbean@redhat.com> - 1.7-1
changelog:
  - Update to latest upstream.
  - Removed the accept-header proxy patch which is included in upstream now.
  - Removed py2.6 compat patch which is included in upstream now.


author: Toshio Kuratomi <toshio@fedoraproject.org> - 1.9.1-1
changelog:
  - Update to upstream 1.9.1 because of security issues with the bundled
    python-pip in older releases.  This is just a quick fix until a
    python-virtualenv maintainer can unbundle the python-pip package
    see: https://bugzilla.redhat.com/show_bug.cgi?id=749378


author: Thomas Spura <tomspur@fedoraproject.org> - 2.2.0.1-1
changelog:
  - update to 2.2.0.1
  - move to BR zeromq3
  - not all *.c files may be deleted, when receneration of .c files by Cython
  - remove bundled folder explicitely


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.1-3
changelog:
  - Add patch that enables building on ppc64p7 (replace the sed, so that
  we get consistent with python2 spec and it's more obvious that we're doing it.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.3.2-1
changelog:
  - Updated to Python 3.3.2.
  - Refreshed patches: 153 (gdb test noise)
  - Dropped patches: 175 (configure -Wformat, fixed upstream), 182 (gdb
  test threads)
  - Synced patch numbers with python.spec.


author: Kalev Lember <kalevlember@gmail.com> - 0.7.1-11
changelog:
  - Rename the Python 2 package to python-speechd, for consistency with other
    distros
  - Backport Python 3 bindings from 0.8-beta1 and install them in python3-speechd
    subpackage (#867958)
  - Update the systemd scriptlets to the macroized versions


author: Marcin Zajaczkowski <mszpak ATT wp DOTT pl> - 0.5.0-5
changelog:
  - remove prodive/obsolete of python-xattr (bug 781838)
  - fix problem with mixed use of tabs and spaces


author: Rex Dieter <rdieter@fedoraproject.org> 0.1.0-0.2.20121113git
changelog:
  - fix changelog
  - -devel: +Requires: cmake qt4-devel
  - link QT_QTGUI_LIBRARY for undefined symbols
  - s/Url/URL/
  - don't package accessibleapps


author: Rex Dieter <rdieter@fedoraproject.org> - 0.0.4-2
changelog:
  - update summary/description/Source_url
  - %files: track soname
  - cleaner cmake-fu
  - upstream noexecstack patch


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.0.4-3
changelog:
  - require the main package with exact version-release in -examples
  - remove explicit Requires: qt4-devel pkgconfig from -devel, now autodetected


author: Rex Dieter <rdieter@fedoraproject.org> - 0.7.1-8
changelog:
  - skip stripping some compiler flags (undocumented)
  - %files: track files closer (lib soname in particular)
  - -devel: avoid dep on cmake 
  - %check: +make test, pkgconfig check


author: Matthieu Saulnier <fantom@fedoraproject.org> - 3.2.0-1
changelog:
  - update to 3.2.0
  - remove BuildRoot tag in spec file
  - remove "rm -rf $RPM_BUILD_ROOT" at the beginning of %install section
  - remove %clean section
  - remove %defattr lines
  - add a joker for libqrencode.so.* files


author: Peter Gordon <peter@thecodergeek.com> - 3.2.0-2
changelog:
  - Add patch to fix improper LIBPTHREAD macro in the pkgconfig file:
    + fix-LIBPTHREAD-macro.patch
  - Resolves: #795582 (qrencode-devel: Malformed pkgconfig file causes build to
    fail ("@LIBPTHREAD@: No such file or directory"))


author: Matthieu Saulnier <fantom@fedoraproject.org> - 3.3.1-1
changelog:
  - update to 3.3.1
  - remove "Group" tag in spec file
  - fix manfile suffix
  - remove patch to fix improper LIBPTHREAD macro in the pkgconfig file:
    - upstream issue


author: Peter Gordon <peter@thecodergeek.com> - 3.4.2-1
changelog:
  - Update to new upstream release (3.4.2)
    - Fixes a memory leak, string-splitting, and Micro QR encoding bugs.
  - Run autoconf in %build to add ARM 64 (aarch64) to the configure scripts.
  - Resolves:  #926414 (qrencode: Does not support aarch64 in f19 and rawhide)
  - Update source/homepage URLs.


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-4
changelog:
  - Do not fiddle with quota files on XFS and GFS (bug #846296)
  - Make sure option -d at quotacheck provides at least as much information as
    option -v (SF#3602777)


author: Petr Pisar <ppisar@redhat.com> - 1:4.01-6
changelog:
  - Add LGPLv2+ and GPLv2 to license declaration
  - Correct changelog dates
  - Package additional LDAP scripts as a documentation
  - Package XFS-specific tools


author: Petr Pisar <ppisar@redhat.com> - 1.8.5-4
changelog:
  - Start service independently on network state (bug #824205)
  - Do not force systemd logging to syslog (bug #824205)


author: Ville Skyttä <ville.skytta at iki.fi> - 1.4.4-2
changelog:
  - Build with $RPM_OPT_FLAGS.
  - Disable autotools dependency tracking for cleaner build logs and possible
    slight build speedup.


author: Honza Horak <hhorak@redhat.com> - 5.8-1
changelog:
  - Update to upstream 5.8
  - Dropped patches -security, -DESTDIR and -option that are not needed 
    anymore
  - Run tests in %check


author: Honza Horak <hhorak@redhat.com> - 5.8.1-2
changelog:
  - Provides: bundled(gnulib) added, as per #821786
  - minor spec file clean up
  - install-info run in postin/postun


author: Stef Walter <stefw@redhat.com> - 0.13.90-1
changelog:
  - Add option to disable package-kit installs [#953852]
  - Add option to use unqualified names [#953825]
  - Better discovery of domains [#953153]
  - Concept of managing parts of the system [#914892]
  - Fix problems with cache directory [#913457]
  - Clearly explain when realm cannot be joined [#878018]
  - Many other upstream enhancements and fixes


author: Stef Walter <stefw@redhat.com> - 0.13.91-1
changelog:
  - Fix regression when using one time password [#958667]
  - Support for permitting logins by group [#887675]


author: Stef Walter <stefw@redhat.com> - 0.14.0-1
changelog:
  - Work around broken krb5 with empty passwords [#960001]
  - Add manual page for realmd.conf [#959357]
  - Update to upstream 0.14.0 version


author: Stef Walter <stefw@redhat.com> - 0.14.1-1
changelog:
  - Update to upstream 0.14.1 version
  - Fix crasher/regression using passwords with joins [#961435]
  - Make second Ctrl-C just quit realm tool [#961325]
  - Fix critical warning when leaving IPA realm [#961320]
  - Don't print out journalctl command in obvious situations [#961230]
  - Document the --all option to 'realm discover' [#961279]
  - No need to require sssd-tools package [#961254]
  - Enable services even in install mode [#960887]
  - Use the AD domain name in sssd.conf directly [#960270]
  - Fix critical warning when service Release() method [#961385]


author: Stef Walter <stefw@redhat.com> - 0.14.2-1
changelog:
  - Update to upstream 0.14.2 version
  - Discover FreeIPA 3.0 with AD trust correctly [#966148]
  - Only allow joining one realm by default [#966650]
  - Enable the oddjobd service after joining a domain [#964971]
  - Remove sssd.conf allow lists when permitting all [#965760]
  - Add dependency on authconfig [#964675]
  - Remove glib-networking dependency now that we no longer use SSL.


author: Stef Walter <stefw@redhat.com> - 0.14.3-1
changelog:
  - Update to upstream 0.14.3 point release
  - Populate LoginFormats correctly [#961442]
  - Documentation clarifications
  - Set sssd.conf default_shell per domain
  - Notify in terminal output when installing packages
  - If joined via adcli, delete computer with adcli too [#961244]
  - If input is not a tty, read from stdin without getpass() [#983153]
  - Configure pam_winbind.conf appropriately [#983153]
  - Refer to FreeIPA as IPA
  - Support use of kerberos ccache to join when winbind


author: Stef Walter <stefw@redhot.com> - 0.14.4-1
changelog:
  - Update to upstream 0.14.4 point release
  - Fix up the [sssd] section in sssd.conf if it's screwed up
  - Add an --unattended argument to realm command line client
  - Clearer 'realm permit' manual page example


author: Stef Walter <stefw@redhat.com> - 0.14.5-1
changelog:
  - Update to upstream 0.14.5 point release
  - Fix regression conflicting --unattended and -U as in --user args
  - Pass discovered server address to adcli tool


author: Zoltan Kota <z.kota[AT]gmx.net> 3.6-29
changelog:
  - Fix build on x86_64. Run autoreconf to update config files.
    autoconf >= 2.64 needs to patch the flex.m4 file.
    Fixing FTBFS bug #564601.


author: Till Maas <opensource@till.name> - 0.3.8.1-3
changelog:
  - Fix SF.net Source0 URL
  - Fix BTFS bug with patch from gentoo: https://bugzilla.redhat.com/show_bug.cgi?id=538931


author: Till Maas <opensource@till.name> - 0.3.8.1-4
changelog:
  - fix jack support: https://bugzilla.redhat.com/show_bug.cgi?id=554292
  - use default Alsa device: https://bugzilla.redhat.com/show_bug.cgi?id=538853
  - use sane theora defaults: https://bugzilla.redhat.com/show_bug.cgi?id=525155
  - apply patch0 only for F12 and higher


author: Matthias Clasen <mclasen@redhat.com> - 12.0.1-1
changelog:
  * Sun Jul 26 2009 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 10.0.1-4
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_12_Mass_Rebuild


author: Jens Petersen <petersen@redhat.com> - 9.1.0-38
changelog:
  - add ARM to ghc_arches_with_ghci for ghc-7.4.2 ghci support
    (NB this change should not be backported before ghc-7.4.2)


author: Panu Matilainen <pmatilai@redhat.com> - 9.1.0-42
changelog:
  - Switch back to manual config.guess/sub copies for reproducability
  - Replace config.guess/sub from %configure again (#951442)


author: Panu Matilainen <pmatilai@redhat.com> - 9.1.0-43
changelog:
  - Add optflags stack protector override for AArch64 (#909788)
  - Also set FCFLAGS from %configure (#914831)


author: Adam Jackson <ajax@redhat.com> 9.1.0-44
changelog:
  - redhat-config-*: Use + to append rather than %rename, to protect against
    multiple -specs= ending up in the command line. (#892837)


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:1.5-9
changelog:
  - Install LICENSE file with javadoc package
  - Add maven POM file
  - Update to current packaging guidelines
  - Convert versioned JAR to unversioned


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.0.0-1
changelog:
  - Update to 1.0.0
  - Plugins are now part of this package (again)
  - Fix two linker errors
  - Add VCS key


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.0.0-7
changelog:
  - Fix scrolling in VNC (#830210)
  - Handle GDK_SCROLL_SMOOTH in VNC and RDP
  - Bring back the --icon/-i autostart option (#834883)
  - Fix fullscreen with multiple monitors (#864262)
  - Resize window to fit remote resolution (#953678)
  - Enable TLS-support in VNC plugin
  - Close SSH tunnels on disconnect (https://github.com/FreeRDP/Remmina/issues/77)
  - Patch out copy of libvncserver shipped in source tarball
  - Update icon cache also for plugins
  - Drop the remmina-plugins-common package
  - Drop Provides/Obsoletes for grdc
  - Spec file clean-up


author: Arkady L. Shane <ashejn@russianfedora.ru> - 19-1.R
changelog:
  - disable updates-testing
  - add f20 certs
  - drop cert links for sparc
  - set fedora repo metadata to 7 day expiry
  - set NAME=Fedora in os-release


author: Arkady L. Shane <ashejn@russianfedora.ru> - 19-3.R
changelog:
  - update f20 secondary gpg key, initial was mad incorrectly
  - only obsolete fedora-release-rawhide less than release 1
  - use version when setting up gpg check so fedup can pull in next
    release gpg key
  - drop media repo file


author: Tom Lane <tgl@redhat.com> 8.4.0-3
changelog:
  - Add -fno-strict-aliasing to CFLAGS per rpmdiff complaint, and -fwrapv
    too just to be on the safe side.
  Related: #596204


author: Tom Lane <tgl@redhat.com> 9.0.0-1
changelog:
  - Update pg_filedump to version 9.0.0, to support PostgreSQL 9.0.
  - Relabel license as PostgreSQL now that that's separately recognized by OSI.


author: Tom Lane <tgl@redhat.com> 9.1.0-1
changelog:
  - Update pg_filedump to version 9.1.0, to support PostgreSQL 9.1.
  - Point to new upstream home at pgfoundry.org.


author: Ondrej Vasik <ovasik@redhat.com> - 8.1-2
changelog:
  - Add dist tag, fix a few rpmlint issues, rebuild due to
    wrong vendor (#451229)
  - Added ncurses requirement(#469390)


author: Phil Knirsch <pknirsch@redhat.com> - 8.1-4
changelog:
  - Added the "we-are-upstream" comments according to Fedora review (#226376)
  - Added -p option to install to preserve timestamps (#226376)


author: Ondrej Vasik <ovasik@redhat.com> - 8.1-5
changelog:
  - removed clear from dot-bash_logout (synchronized with bash,
    related to #429406)
  - removed unset USERNAME from dot-bash_profile (synchronized with
    bash, related to #196735)


author: Than Ngo <than@redhat.com> - 3.11-1
changelog:
  - 3.11
  - bz#540763, add IP allocation by pppd ability to pppoe-server
  - bz#808676, add missing % symbol for triggerun


author: Steve Dickson <steved@redhat.com> - 0.2.0-18
changelog:
  - Fixed typo causing rpcbind to run as root (bz 734598)
  - Added /etc/sysconfig/rpcbind config file (bz 861025)


author: Panu Matilainen <pmatilai@redhat.com> - 4.10.90-0.git11989.3
changelog:
  - package /usr/lib/rpm/macros.d directory (related to #846679)
  - fixup a bunch of old incorrect dates in spec changelog


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.0-0.beta1.2
changelog:
  - armv7hl and armv7hnl should not have -mthumb (#901901)
  - fix duplicate directory ownership between rpm and rpm-build (#894201)
  - fix regression on paths shared between a real file/dir and a ghost


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.0.1-2
changelog:
  - check for stale locks when opening write-cursors (#860500, #962750...)
  - serialize BDB environment open/close (#924417)


author: Panu Matilainen <pmatilai@redhat.com> - 4.11.1-1
changelog:
  - update to 4.11.1 (http://rpm.org/wiki/Releases/4.11.1)
  - drop upstreamed patches
  - fix .gnu_debuglink CRC32 after dwz, buildrequire binutils-devel (#971119)
  - ensure relocatable packages always get install-prefix(es) set (#979443)


author: Matilainen <pmatilai@redhat.com> - 4.11.1-2
changelog:
  - fix build-time double-free on file capability processing (#956190)
  - fix relocation related regression on file sanity check (#1001553)
  - fix segfault on empty -p <lua> scriptlet body (#1004062)
  - fix source url, once again


author: Tom Callaway <spot@fedoraproject.org> - 1.4-10
changelog:
  - fix handling of ruby RI files as text files (they are binary files)
  - apply upstream fix for macro regexp


author: Tom Callaway <spot@fedoraproject.org> - 1.5-4
changelog:
  - Fix handling of Exec= with an absolute path (bz991278)
  - Update license list, add AGPLv3+ (bz894187)


author: Michal Sekletar <msekleta@redhat.com> - 0.17-71
changelog:
  - resolves: RHBZ #737244 #896583 #947213
  - migrate from xinetd to systemd configuration
  - close pam session correctly when client does not ask for separate error channel
  - fix pty handling which was broken by changes in /bin/login


author: Michal Sekletar <msekleta@redhat.com> - 0.17-72
changelog:
  - unit files must not be marked as config files
  - fix handling of non-native IPv6 connections via AF_INET6 socket


author: Michal Luscon <mluscon@redhat.com> 3.0.9-4
changelog:
  - Fixed: #823088 - rsync loses track of files with different directory prefixes
  - Fixed: #495310 - rsync contains forked copy of zlib


author: Tomas Heinrich <theinric@redhat.com> 5.8.11-1
changelog:
  - upgrade to new upstream stable version 5.8.11
  - add impstats and imptcp modules
  - include new license text files
  - consider lock file in 'status' action
  - add patch to update information on debugging in the man page
  - add patch to prevent debug output to stdout after forking
  - add patch to support ssl certificates with domain names longer than 128 chars


author: Tomas Heinrich <theinric@redhat.com> 7.2.2-1
changelog:
  - upgrade to upstream version 7.2.2
    update BuildRequires
  - remove patches merged upstream
    rsyslog-5.8.7-sysklogd-compat-1-template.patch
    rsyslog-5.8.7-sysklogd-compat-2-option.patch
    rsyslog-5.8.11-close-fd1-when-forking.patch
  - add patch from Milan Bartos <mbartos@redhat.com>
    rsyslog-7.2.1-msg_c_nonoverwrite_merge.patch
  - remove the rsyslog-sysvinit package
  - clean up BuildRequires, Requires
  - remove the 'BuildRoot' tag
  - split off a doc package
  - compile additional modules (some of them in separate packages):
    elasticsearch
    hiredis
    mmjsonparse
    mmnormalize
    mmaudit
    mmsnmptrapd
    mongodb
  - correct impossible timestamps in older changelog entries
  - correct typos, trailing spaces, etc
  - s/RPM_BUILD_ROOT/{buildroot}/
  - remove the 'clean' section
  - replace post* scriptlets with systemd macros


author: Tomas Heinrich <theinric@redhat.com> 7.2.6-1
changelog:
  - rebase to 7.2.6
  - drop the option for backwards compatibility from the
    sysconfig file - it is no longer supported
  - remove compat.so - should not be installed


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.0-7
changelog:
  - Macro definition moved into macros.ruby and macros.rubygems files.
  - Added filtering macros.
  - Filter automatically generated provides of private libraries (rhbz#947408).


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.195-8
changelog:
  - Update to Ruby 2.0.0-p195 (rhbz#917374).
  - Fix object taint bypassing in DL and Fiddle (CVE-2013-2065).
  - Fix build against OpenSSL with enabled ECC curves.
  - Add aarch64 support (rhbz#926463).


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-9
changelog:
  - Update to Ruby 2.0.0-p247 (rhbz#979605).
  - Fix CVE-2013-4073.
  - Fix for wrong makefiles created by mkmf (rhbz#921650).
  - Add support for ABRT autoloading.


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-13
changelog:
  - Fixes multilib conlicts of .gemspec files.
  - Make symlinks for psych gem to ruby stdlib dirs (rhbz#979133).
  - Use system-wide cert.pem.


author: Vít Ondruch <vondruch@redhat.com> - 2.0.0.247-14
changelog:
  - Add forgotten psych.rb link into rubygem-psych to fix "private method `load'
    called for Psych:Moduler" error (rhbz#979133).


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1:3.2.6-1
changelog:
  - Update to ActiveResource 3.2.6.
  - Removed no longer needed BuildRoot tag.
  - Run tests without Rake.
  - Introduce -doc subpackage.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1:3.2.6-1
changelog:
  - Update to ActiveSupport 3.2.6.
  - Removed unneeded BuildRoot tag.
  - Tests no longer fail with newer versions of Mocha, remove workaround.


author: Vít Ondruch <vondruch@redhat.com> - 1.6.1-1
changelog:
  - Rebuild for https://fedoraproject.org/wiki/Features/Ruby_2.0.0
  - Update to the coffee-script-source 1.6.1.


author: Vít Ondruch <vondruch@redhat.com> - 1.1.3-3
changelog:
  - Rebuild for https://fedoraproject.org/wiki/Features/Ruby_2.0.0
  - Change the dependency to rubygem(rspec).
  - Add bootstrap code.


author: Matthew Kent <mkent@magoazul.com> - 2.6.5-2
changelog:
  - Move file rename to build stage (#530275).
  - Simplify %check stage (#530275).
  - Remove disable of test_syntax2, fixed by new ruby build (#530275).


author: Vít Ondruch <vondruch@redhat.com> - 2.6.6-1
changelog:
  - Updated to the latest upstream (#670589).
  - Removed flawed require check.
  - Removed obsolete BuildRoot.
  - Removed obsolete cleanup.
  - Package setup and test execution reworked.
  - Removed bindir magick.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 2.7.0-1
changelog:
  - Update to Erubis 2.7.0.
  - Removed unneeded %defattr usage.
  - Removed no longer needed rubygem(abstract) dependency.
  - Remove no longer needed test patch.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.4.0-2
changelog:
  - Removed the duplicated "git checkout" in comment.
  - BR: rubygem(therubyracer) for tests, don't use deprecated js.


author: Vít Ondruch <vondruch@redhat.com> - 0.5.0-1
changelog:
  - Update to i18n 0.5.0.
  - Documentation moved into subpackage.
  - Removed unnecessary cleanup.
  - Preparetion for test suite execution during build.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.0.4-1
changelog:
  - Update to Journey 1.0.4, as this version is needed by ActionPack 3.2.6.
  - Remove unneded Requires: ruby.


author: <Minnikhanov@gmail.com> - 2.2.15-2
changelog:
  - Fix Comment 18 #665560. https://bugzilla.redhat.com/show_bug.cgi?id=665560#c18 
  - Remove create Gemfile.lock at prep-section.


author: <Minnikhanov@gmail.com> - 2.3.0-1
changelog:
  - Updated mail to latest upstream release (v.2.3.0 2011-04-27)
  - Test excluded. May be need Zentest >= 4.4.0 and rubygem(rcov).


author: Troy Dawson <tdawson@redhat.com> - 1.4.0-3
changelog:
  - Changed group to Development/Languages
  - Changed the global variables
  - Seperated the doc and test into the doc rpm


author: Vít Ondruch <vondruch@redhat.com> - 0.3.1-1
changelog:
  - Updated to the latest upstream version.
  - Tests enabled.
  - Documentation moved into separate package.
  - Remove unnecessary Hoe runtime dependency.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1:1.4.0-1
changelog:
  - Update to Rack 1.4.
  - Moved gem install to %prep to be able to apply patches.
  - Applied two patches that fix test failures with Ruby 1.8.7-p357.


author: Bohuslav Kabrda <bkabrda@redhat.com> - 3.2.6-1
changelog:
  - Update to Railties 3.2.6.
  - Move some files into -doc subpackage.
  - Remove the unneeded %defattr.
  - Introduce %check section (not running tests yet, as they are part of dependency loop).


author: Matthew Kent <mkent@magoazul.com> - 1.2.4-2
changelog:
  - Move pt_testcase.rb to the build stage so it's included in the rpm (#541512).
  - Drop version requirements for sexp_processor and ruby_parser as they are new
    packages (#541512).


author: Matthew Kent <mkent@magoazul.com> - 2.0.4-2
changelog:
  - Move pt_testcase.rb to the build stage so it's included in the rpm (#541491).
  - Drop version requirements for sexp_processor as it is a new package
    (#541491).
  - Exclude gauntlet_rubyparser.rb as it introduces a circular dependency
    (#541491).


author: Vít Ondruch <vondruch@redhat.com> - 3.2.6-1
changelog:
  - Rebuild for https://fedoraproject.org/wiki/Features/Ruby_2.0.0
  - Update to sass 3.2.6.
  - Own extra and rails directories (rhbz#911648).


author: Vít Ondruch <vondruch@redhat.com> - 0.16.0-1
changelog:
  - Update to thor 0.16.0.
  - Remove rubygem(diff-lcs) dependency, since it is just optional.
  - Remove rubygem(ruby2ruby) dependnecy, since it is just optional, to allow
    conversion of Rakefiles to Thorfiles (but it doesnt work withou ParseTree anyway).


author: Bohuslav Kabrda <bkabrda@redhat.com> - 1.3.3-2
changelog:
  - Rebuilt for Ruby 1.9.3.
  - Introduced %bootstrap macro to deal with dependency loop for BuildRequires.


author: Mamoru TASAKA <mtasaka@fedoraproject.org> - 2.0.12-109
changelog:
  - Update to 2.0.12
  - Un-unlink %{_sysconfdir}/pki/tls/cert.pem with discussion with
    Vít Ondruch <vondruch@redhat.com>


author: Andreas Bierfert <andreas.bierfert[AT]lowlatency.de>
changelog:
  - 9.14-1
  - version ugprade
  - drop screen patch (upstream)
  - disable libAfterImage as it is deprecated


author: Nils Philippsen <nils@redhat.com> - 1.0.23-18
changelog:
  - build against libusb-1.0 on Fedora >= 18 (#1003193)
  - require libusbx-devel instead of libusb1-devel which is obsolete


author: Nils Philippsen <nils@redhat.com> - 1.0.24-1
changelog:
  - version 1.0.24
  - use (hopefully stable) Alioth download URL
  - update udev patch, remove obsolete patches
  - use udev hwdb instead of huge rulesets


author: Martin Milata <mmilata@redhat.com> 0.4-1
changelog:
  - New upstream version
    - Added features needed by ABRT
    - Support for uReport2
    - Major C and Python API changes
  - Patch for python-2.6 compatibility


author: Richard Marko<rmarko@redhat.com> 0.8-1
changelog:
  - New upstream version
    - Added support for json de/serialization of reports and stacktraces.
    - Library version number increased, as the interface changed since the last release


author: Jakub Filak <jfilak@redhat.com> 0.9-1
changelog:
  - New upstream version
    - Enrich koops uReport data with koops text and kernel version.
    - Improve koops modules handling.


author: Jakub Filak <jfilak@redhat.com> 0.10-1
changelog:
  - New upstream version
    - Fix a segmentation fault in sr_rpm_package_uniq()
    - Respect kernel flavor when parsing package name
    - Parse backtrace without Thread header
    - Fix koops json output if there are no modules
    - Add support for multiple koops stacks


author: Jakub Filak <jfilak@redhat.com> 0.11-1
changelog:
  - New upstream version
    - Make all python objects hashable
    - Improve memory management in rpm module
    - Extend the list of normalized functions
    - Add command for debugging duphashes to satyr utility


author: Nicolas CHauvet <kwizart@fedoraproject.org> - 1.0.8-4
changelog:
  - Remove gstreamer-plugins-schroedinger 
    Obsoleted by gst-plugins-bad-free introduction in Fedora.


author: Martin Sourada <mso@fedoraproject.org> - 18.91.0-1
changelog:
  - New release. 
    - Adds supplemental wallpapers.
    - Switches non-animated default from night to dawn (rhbz 962952)


author: Dan Horák <dan[at]danny.cz> - 1.4.2-1
changelog:
  - update to 1.4.2
  - remove non-free content from source archive (#887221)
  - drop doc and devel sub-packages
  - switch to lcms2


author: Cole Robinson <crobinso@redhat.com> - 1.7.1-1
changelog:
  - Rebased to version 1.7.1
  - Initial support for booting from USB attached scsi (USB UAS) drives
  - USB EHCI 64bit controller support
  - USB MSC multi-LUN device support
  - Support for booting from LSI SCSI controllers on emulators
  - Support for booting from AMD PCscsi controllers on emulators


author: Cole Robinson <crobinso@redhat.com> - 1.7.2-1
changelog:
  - Rebased to version 1.7.2
  - Support for ICH9 host chipset ("q35") on emulators
  - Support for booting from LSI MegaRAID SAS controllers
  - Support for using the ACPI PM timer on emulators
  - Improved Geode VGA BIOS support.
  - Several bug fixes


author: Jiri Moskovcak <jmoskovc@redhat.com> 4.2.1-4
changelog:
  - added libselinux-devel to buildrequires rhbz#514182
  - fixed problem with --excludedocs rhbz#515913


author: Jan Görig <jgorig@redhat.com> 4.2.1-5
changelog:
  - fixed make check on non UTF-8 locale - upstream patch rhbz#550731
  - readded -c option (thanks Paolo Bonzini) rhbz#566455
  - removed previous -c dummy patch
  - changed license to GPLv3+


author: Martin Briza <mbriza@redhat.com> - 4.2.1-9
changelog:
  - Backported commit from upstream to fix treating "x26" as "&" character
  - Added virtual provide for gnulib according to http://fedoraproject.org/wiki/Packaging:No_Bundled_Libraries 
    Resolves: #812067 #821776


author: Martin Briza <mbriza@redhat.com> - 4.2.2-1
changelog:
  - New release
  - Dropping included patches: sed-4.2.1-data-loss.patch sed-4.2.1-fix-0x26-on-RHS.patch sed-4.2.1-makecheck.patch
  - Dropping unused patch sed-4.2.1-dummyparam.diff
  - Regenerated sed-4.2.{1,2}-copy.patch
  - Minor change to patching (creating backup files)


author: Michel Salim <salimma@fedoraproject.org> - 3.1.1-2
changelog:
  - Multilib fix: Seed.js now searches both lib64 and lib directories
  - Documentation subpackage no longer depends on gtk-doc (# 707571)


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.2
changelog:
  - Fix lsm.fc for pid files
  - Allow init_t to transition to all inetd domains
  - Allow tgtd_t to connect to isns ports
  - Lots of new access required for sosreport
  - svirt domains neeed to create kobject_uevint_sockets
  - Use just init_domain instead of init_daemon_domain in inetd_core_service_domain
  - Cleanup related to init_domain()+inetd_domain fixes
  - Allow cvs to bind to the cvs_port
  - Allow ktalkd to bind to the ktalkd_port
  - Allow telnetd to bind to the telnetd_port
  - Allow rlogind to bind to the rlogin_port
  - Allow apache domain to connect to gssproxy socket
  - Dontaudit attempts to bind to ports < 1024 when nis is turned on
  - Allow cupsd_lpd_t to bind to the printer port
  - Allow a confined domain to executes mozilla_exec_t via dbus
  - Allow mdadm to getattr any file system
  - Allow sandbox domain to read/write mozilla_plugin_tmpfs_t so pulseaudio will work
  - Allow all domains that can read gnome_config to read kde config
  - Call the correct interface - corenet_udp_bind_ktalkd_port()
  - Fix mozilla_plugin_rw_tmpfs_files() 
  - Allow systemd running as git_systemd to bind git port
  - Allow firewalld to read NM state
  - Add interface couchdb_search_pid_dirs
  - Add support for couchdb in rabbitmq policy
  - Add boolean boinc_execmem
  - Add interface netowrkmanager_initrc_domtrans
  - Dontaudit leaks into ldconfig_t
  - Dontaudit inherited lock files in ifconfig o dhcpc_t
  - Move kernel_stream_connect into all Xwindow using users
  - Dontaudit su domains getattr on /dev devices, move su domains to attribute based calls
  - Add interface to read authorization data in the users homedir
  - Allow ipsec_t to read .google authenticator data
  - Allow staff_t to read login config
  - Treat files labeld as usr_t like bin_t when it comes to transitions
  - Split out rlogin ports from inetd
  - Add interface seutil_dbus_chat_semanage
  - Fix selinuxutil.if


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.3
changelog:
  - Treat usr_t just like bin_t for transitions and executions
  - Allow memcache to read sysfs data
  - openct needs to be able to create netlink_object_uevent_sockets
  - Allow nslcd to read /sys/devices/system/cpu
  - Allow mdadm to read /dev/mei
  - amanda_exec_t needs to be executable file
  - Add additional labeling for qemu-ga/fsfreeze-hook.d scripts
  - Allow setpgid and r/w cluster tmpfs for fenced_t
  - Allow block_suspend cap for samba-net
  - Allow mpd setcap which is needed by pulseaudio
  - Add antivirus_home_t type for antivirus date in HOMEDIRS
  - Allow glance-api to connect to amqp port
  - Fix wrong capabilities in rhcs policy


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.4
changelog:
  - fix bad labels in puppet.if
  - Allow tcsd to read utmp file
  - Define svirt_socket_t as a domain_type
  - Fix puppet_domtrans_master() interface to make passenger working correctly if it wants to read puppet config file
  - Allow passenger to execute ifconfig


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.5
changelog:
  - Fix label on pam_krb5 helper apps
  - Allow apps that read ipsec_mgmt_var_run_t to search ipsec_var_run_t
  - Allow init_t to run crash utility
  - Fix label on pam_krb5 helper apps
  - Allow init_t to run crash utility
  - Call neutron interfaces instead of quantum
  - Allow users to communicate with journald using tmpfs files
  - Allow nslcd to send signull to itself
  - Fix virtd_lxc_t to be able to communicate with hal, need backport to rhel6 ASAP, for docker stuff
  - Fix missing types in  virt_admin interface
  - Dontaudit attempts by sosreport to read shadow_t
  - Allow cobbler to exec rsync and communicate with sssd, using nsswitch
  - Add new label mpd_home_t
  - Label /srv/www/logs as httpd_log_t
  - Allow irc_t to use tcp sockets
  - Add labels for apache logs under miq package
  - Allow fetchmail to send mails
  - allow neutron to connect to amqp ports
  - Fix to use quantum port
  - Rename quantum to neutron
  - Allow virt_qemu_ga_t to read meminfo
  - Allow kdump_manage_crash to list the kdump_crash_t directory
  - Allow ldconfig to write to kdumpctl fifo files
  - Allow openshift_cron_t to run ssh-keygen in ssh_keygen_t to access host keys


author: Miroslav Grepl <mgrepl@redhat.com> 3.12.1-74.7
changelog:
  - Allow setroubleshoot to look at /proc
  - Allow telepathy domains to dbus with systemd logind
  - Fix handling of fifo files of rpm
  - Allow certwatch to write to cert_t directories
  - New abrt application
  - Allow mozilla_plugin to transition to itself
  - Allow mdadm_t to read images labeled svirt_image_t
  - Allow NetworkManager to set the kernel scheduler
  - Allow abrt daemon to manage abrt-watch tmp files
  - Allow abrt-upload-watcher to search /var/spool directory
  - More handling of ther kernel keyring required by kerberos


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.8
changelog:
  - Get labeling right on ipsec.secrets
  - Allow systemd to read dhcpc_state
  - Allow amanda to write to /etc/amanda/DailySet1 directory
  - Fix english on gssd_read_tmp boolean descriptions
  - Allow cloud-init to domtrans to rpm
  - Allow abrt daemon to manage abrt-watch tmp files
  - Allow abrt-upload-watcher to search /var/spool directory
  - Fix typo in abrt.te


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.9
changelog:
  - Allow systemd domains to read /dev/urand
  - Remove duplicated interfaces
  - Fix port definition for ctdb ports
  - Dontaudit attempts for mozilla_plugin to append to /dev/random
  - Allow domains that communicate with systemd_logind_sessions to use systemd_logind_t fd
  - Match upstream labeling
  - Fix labeling for mgetty.* logs
  - glusterd binds to random unreserved ports
  - add type defintion for ctdbd_var_t
  - Fix ctdb.te
  - Add support for /var/ctdb. Allow ctdb block_suspend and read /etc/passwd file
  - apcupsd needs to send a message to all users on the system so needs to look them up
  - Allow polipo_daemon to connect to flash ports
  - Dontaudit attempts for mozilla_plugin to append to /dev/random
  - Fix the label on ~/.juniper_networks
  - Allow readahead to read /dev/urand
  - Fix lots of avcs about tuned
  - Any file names xenstored in /var/log should be treated as xenstored_var_log_t
  - Allow condor domains to list etc rw dirs
  - Allow cobblerd to connect to mysql
  - Label zarafa-search as zarafa-indexer
  - Openshift cgroup wants to read /etc/passwd
  - Allow mpd to interact with pulseaudio if mpd_enable_homedirs is turned on
  - Fix labeling for /usr/libexec/kde4/kcmdatetimehelper
  - Allow tuned to search all file system directories
  - Allow alsa_t to sys_nice, to get top performance for sound management
  - Dontaudit leaked unix_stream_sockets into gnome keyring
  - Allow telepathy domains to inhibit pipes on telepathy domains
  - Allow dirsrv_t to create tmpfs_t directories
  - Allow openvpn_t to manage openvpn_var_log_t files.


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.10
changelog:
  - Add kill capability in glusterfs policy
  - Add postfix_rw_spool_maildrop_files interface
  - Update httpd_can_sendmail boolean to allow read/write postfix spool maildrop
  - Dontaudit setroubleshoot_fixit_t execmem, since it does not seem to really need it.
  - Allow init_t to read gnome home data
  - Allow svirt sandbox domains to setattr on chr_file and blk_file svirt_sandbox_file_t, so sshd will work within
  - Allow httpd_t to read also git sys content symlinks
  - Remove httpd_cobbler_content * from cobbler_admin interface
  - allow openshift_cgroup_t to read/write inherited openshift file types
  - fix gnome_read_generic_data_home_files interface
  - Make sure if systemd_logind creates nologin file with the correct label
  - Allow syslog to bind to tls ports
  - Clean up ipsec.te
  - Allow init_t to read gnome home data
  - Allow to su_domain to read init states
  - Update labeling for /dev/cdc-wdm


author: Lukas Vrabec <lvrabec@redhat.com> 3.12.1-74.11
changelog:
  - Back port piranha tmpfs fixes from RHEL6
  - Fix piranha_domain_template()
  - Allow mozilla_plugin to bind to the vnc port if running with spice
  - Allow svirt_domains to read sysctl_net_t
  - Update ppp_manage_pid_files interface
  - Allow ctdbd to create udp_socket. Allow ndmbd to access ctdbd var files.
  - Allow dovecot-auth to read nologin
  - Allow mailserver_domains to manage and transition to mailman data
  - Allow thin_t to block suspend
  - Create resolv.conf in the pppd_var_run_t with the net_conf_t label
  - wicd.pid should be labeled as networkmanager_var_run_t
  - Label /sbin/xfs_growfs as fsadm_exec_t
  - Allow SELinux users to create coolkeypk11sE-Gate in /var/cache/coolkey
  - Create resolv.conf in the pppd_var_run_t with the net_conf_t label
  - Fix labeling for /etc/strongswan/ipsec.d
  - Add labeling for /var/run/charon.ctl socket
  - Allow syslogd_t to connect to the syslog_tls port


author: Jaroslav Škarvada <jskarvad@redhat.com> - 8.14.6-2
changelog:
  - Fixed milter_helo regression (milter-helo-fix patch)
    Resolves: rhbz#895552
  - Fixed bogus dates in changelog


author: Dan Walsh <dwalsh@redhat.com> - 3.2.9-1
changelog:
  - On update cp instead of rename, since there could be a situation where
  someone has ~/.config on a different file sytem then ~.  It has happened.
  - Fix --password spelling error
  - Remove --quit option from sealert
  - Update translations


author: Dan Walsh <dwalsh@redhat.com> - 3.0.52-1
changelog:
  - Update Translations
  - Only translate catchall_boolean descritpions if the are not unicode to start with.


author: Dan Walsh <dwalsh@redhat.com> - 3.0.53-1
changelog:
  - Update Translations
  - Add sandbox_connect plugin to point out the use of alternate types with the sandbox -X command.


author: Dan Walsh <dwalsh@redhat.com> - 3.0.57-1
changelog:
  - Add restorecon_source plugin, to check the source program is labeled correclty.
  - Fix restorecon.py to handle customized_files properly.
  - Update Translations


author: Ondrej Vasik <ovasik@redhat.com> 2.8.66-1
changelog:
  - assign :190 gid for systemd-journal (#918120)
  - assign 191:191 uidgid pair for systemd-journal-gateway (#918120)


author: Ondrej Vasik <ovasik@redhat.com> 2.8.67-1
changelog:
  - assign 166:166 uidgid pair for ceilometer (#923891)
  - change 187:187 reservation from openstack-heat
    to just heat(#923858)
  - longer shell names support caused by UsrMove to
    the /etc/shells (#922527)
  - drop gopher (uid 13, gid 30) from groups created by default
    -> dropped completely - no gopher server in Fedora (#918206)
  - drop dip (gid 40) from groups created by default
    -> moved to ppp (#918206)
  - drop uucp (uidgid 14) from groups created by default
    -> moved to uucp (#918206)
  - create cdrom, tape, dialout, floppy groups in setup(#919285)


author: Richard W.M. Jones <rjones@redhat.com> - 0-1.1.20110622svn
changelog:
  - Fix date in release string.
    NB: To make this version > than the previous, I had to use 1.1.20110622
    instead of 0.1.20110622, since the old second field was 20110623.
  - Unset MAKEFLAGS, since parallel make breaks the build.
  - Bring the spec file up to modern standards.


author: Jan Synáček <jsynacek@redhat.com> - 1.2.0.10-9
changelog:
  - dos2unix'ed the patch
  - Call dos2unix before patching and dos2unix Makefile as well
  - Use %{_sbindir} instead of '/sbin'


author: Matthias Clasen <mclasen@redhat.com> - 1.0-2
changelog:
  - Own/%ghost files generated by update-mime-database from
    freedesktop.org.xml (patch by Ville Skyttä, #716451))


author: Rex Dieter <rdieter@fedoraproject.org>
changelog:
  - 1.0-4
  - defaults.list: s/mozilla-firefox/firefox/ (see #736558)
  - defaults.list: s/gpk-install-file/gpk-install-local-file/
  - defaults.list: application/x-catalog=gpk-install-catalog.desktop (#770019)


author: David Nalley <david@gnsa.us> - 0.2.2-2
changelog:
  - removed -n from setup
  - hardcoded version number. 
  - changed lic from gpl to gplv2
  - added INSTALL to doc
  - added proper handling of initscripts


author: Fabio M. Di Nitto <fdinitto@redhat.com> - 0.3.0-2
changelog:
  - Rebuild against new corosync (soname change).
  - Add patch to fix build against new corosync headers.


author: Peter Jones <pjones@redhat.com> - 0.2-3
changelog:
  - Also provide shim-fedora.efi, signed only by the fedora signer.
  - Fix the fedora signature on the result to actually be correct.
  - Update for shim-unsigned 0.2-3


author: Peter Jones <pjones@redhat.com> - 0.2-3.3
changelog:
  - Add obsoletes and provides for earlier shim-signed packages, to cover
    the package update cases where previous versions were installed.
    Related: rhbz#888026


author: Peter Jones <pjones@redhat.com> - 0.4-1
changelog:
  - Provide a fallback for uninitialized Boot#### and BootOrder
    Resolves: rhbz#963359
  - Move all signing from shim-unsigned to here
  - properly compare our generated hash from shim-unsigned with the hash of
    the signed binary (as opposed to doing it manually)


author: Jindrich Novy <jnovy@redhat.com> - 0.12.3-5
changelog:
  - add patch to fix build against libgphoto2-2.5.0, thanks to Clinton Rogers
    (http://redmine.yorba.org/issues/5553)


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.13.0-1
changelog:
  - Update to 0.13.0.
  - Remove patches applied upstream.
  - Add BR on json-glib.
  - Add runtime dependency on dconf.


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.14.1-1.1
changelog:
  - Add patch fixing the video-thumbnailer (rhbz#986574),
    thanks to David Woodhouse.
  - Fix bogus dates in the %changelog.


author: Mathieu Bridon <bochecha@fedoraproject.org> - 1.0-7
changelog:
  - Use new archive from upstream at same location (which is lowercase now)
  - Remove dubious Provides: (RHBZ#563395)


author: Mathieu Bridon <bochecha@fedoraproject.org> - 1.0-8
changelog:
  - Fix Obsolete: that was wrong when renaming the package.
  - The font base folder was listed twice (one was hidden in the font macro)


author: Roozbeh Pournader <roozbeh@gmail.com> - 4.104-1
changelog:
  - Update main font to 4.104 (with Unicode 5.1 support)
  - Remove Doulos Literacy (not maintained anymore)
  - Last update before conversion to new fonts policy


author: Minto Joseph <mvaliyav at redhat.com> - 2.4-4
changelog:
  - Cleaned up the spec file as per new font packaging guidelines
  - Replaced padauk-src.ttf and padaukbold-src.ttf with Padauk.ttf and Padauk-Bold.ttf [490583]
  - Renamed the package to sil-padauk-fonts


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:1.7.2-2
changelog:
  - Fix license to ASL 2.0 and MIT
  - Update to add_maven_depmap macro
  - Use generated .mfiles list
  - Small packaging cleanups


author: Naveen Kumar <nkumar@redhat.com> - 4.4.4
changelog:
  - rectify error to directly install fonts in fontdir instead of subdir in fontdir
  - Resolves bug #653608


author: Rajeesh K Nambiar <rajeeshknambiar@gmail.com> 5.0.1-1
changelog:
  - New upstream release 5.0.1 introducing Unicode 5.1 compatibility
  - Resolves Meera size issues
  - Drop upstreamed patches for RHBZ# 545683, 616324 and 781938
  - Resolves RHBZ# 803183
  - Spec cleanup


author: Pravin Satpute <psatpute@redhat.com> 5.0.1-2
changelog:
  - Resolved bug 803234
  - Updated panose for Meera, RaghuMalayalam and Kalyani
  - Changed conf file of Rachana from Sans to Serir


author: Martin Gieseking <martin.gieseking@uos.de> 1.0.0-2
changelog:
  - replaced $CXXFLAGS with %{optflags} in %build section
  - removed empty %doc entry from %files devel


author: Martin Gieseking <martin.gieseking@uos.de> 1.0.2-1
changelog:
  - updated to release 1.0.2
  - changed License to BSD
  - dropped the patch as it has been applied upstream


author: Bryn M. Reeves <bmr@redhat.com> = 2.2-19.el6
changelog:
  - Collect additional diagnostic information for realtime systems
    Resolves: bz789096
  - Improve sanitization of RHN user and case number in report name
    Resolves: bz771393
  - Fix verbose output and debug logging
    Resolves: bz782339 
  - Add basic support for CloudForms data collection
    Resolves: bz752666
  - Add support for Subscription Asset Manager diagnostics
    Resolves: bz752670


author: Bryn M. Reeves <bmr@redhat.com> = 2.2-22.el6
changelog:
  - Correct aeolus debug invocation in CloudForms module
    Resolves: bz752666
  - Update gluster module for gluster-3.3
    Resolves: bz784061
  - Add additional command output to gluster module
    Resolves: bz768641
  - Add support for collecting gluster configuration and logs
    Resolves: bz752549


author: Bryn M. Reeves <bmr@redhat.com> = 2.2-24.el6
changelog:
  - Fix katello and aeolus command string syntax
    Resolves: bz752666
  - Remove stray hunk from gluster module patch
    Resolves: bz784061


author: Bryn M. Reeves <bmr@redhat.com> = 2.2-29.el6
changelog:
  - Collect the swift configuration directory in gluster module
    Resolves: bz822442
  - Update IPA module and related plug-ins
    Resolves: bz812395


author: Adrian Reber <adrian@lisas.de> - 3.1.6-1
changelog:
  - updated to 3.1.6
  - removed buildroot and clean section
  - fixed "missing c++ source language detection for .cxx extension" (#728311)
  - fixed "source-highlight : Conflicts with autoconf-archive" (#797794)


author: Frantisek Kluknavsky <fkluknav@redhat.com> - 14.4.1-4
changelog:
  - removed liblpc10 from source tarball due to licensing uncertainity
  - added license file to libgsm
  - fixed bogus dates in changelog


author: Milos Jakubicek <xjakub@fi.muni.cz> - 1.0.4-9
changelog:
  - Fix FTBFS: remove %exclude of Python's byte-compiled files under %{_bindir},
    not necessary anymore (has been fixed in brp-python-bytecompile)


author: Paul Howarth <paul@city-fan.org> - 1.1-0.2.a6
changelog:
  - Add exec permission for modules that can be run directly
  - Remove references to unused patch
  - Add missing dependency on python-lockfile (#661942)


author: Tomas Hoger <thoger@redhat.com> - 1.2-0.7.beta3
changelog:
  - Security update: Add mode checks to speex_packet_to_header() to protect
    applications using speex library and not having proper checks
    (CVE-2008-1686, #441239, https://trac.xiph.org/changeset/14701)


author: Hans de Goede <hdegoede@redhat.com> - 0.12.4-1
changelog:
  - New upstream bug-fix release 0.12.4
  - Add patches from upstream git to fix sound-channel-free crash (rhbz#986407)
  - Add Obsoletes for dropped spice-client sub-package


author: Hans de Goede <hdegoede@redhat.com> - 0.12.0-1
changelog:
  - New upstream release 0.12.0
  - This moves the tmpfiles.d to /usr/lib/tmpfiles.d (rhbz#840194)
  - This adds a systemd .service file (rhbz#848102)


author: Hans de Goede <hdegoede@redhat.com> - 0.12.0-2
changelog:
  - Fix setting of mode on non arbitrary resolution capable X driver
  - Fix wrong mouse coordinates on vms with multiple qxl devices


author: Hans de Goede <hdegoede@redhat.com> - 0.14.0-1
changelog:
  - New upstream release 0.14.0
  - Adds support for file transfers from client to guest
  - Adds manpages for spice-vdagent and spice-vdagentd


author: Hans de Goede <hdegoede@redhat.com> - 0.14.0-3
changelog:
  - Advertise clipboard line-endings for copy and paste line-ending conversion
  - Build spice-vdagentd as pie + relro


author: Hans de Goede <hdegoede@redhat.com> - 0.14.0-5
changelog:
  - Silence session agent error logging when not running in a vm (rhbz#999804)
  - Release guest clipboard ownership on client disconnect (rhbz#1003977)


author: Jan Stanek <jstanek@redhat.com> - 3.7.16.2-1
changelog:
  - update to 3.7.16.2 (http://www.sqlite.org/releaselog/3_7_16_2.html)
  - add support for aarch64 (rerunning autoconf) (#926568)


author: Jaroslav Škarvada <jskarvad@redhat.com> - 4.10.2.2614-1
changelog:
  - New version
    Resolves: rhbz#861633, rhbz#861970, rhbz#856016
  - Fixed desktop file
    Resolves: rhbz#544256
  - Merged nonXOplugins to main package
  - Replaced defines by globals
  - Added own version of inisqueak
  - Fixed squeak startup script (by squeak-init-fix patch)
  - Removed squeak.sh and mysqueak
  - Removed sources symlinks
  - Dropped alsa-scratchy-sound patch (upstreamed)
  - Dropped imgdir, rpath patches (not needed)
  - Defuzzification of patches
  - Added xmessage requirement (xorg-x11-apps)
  - Fixed bogus dates in changelog


author: Michal Luscon <mluscon@redhat.com> - 7:3.2.9-1
changelog:
  - Update to latest upstream version 3.2.9
  - Fixed: CVE-2013-1839
  - Removed: makefile-patch (+make check)


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 1.1.0-1
  — Update to new stable release
  — Major refactoring now that some sanity prevailed upstream in font naming
    Be careful if you used the old font family names


author: Roland McGrath <roland@redhat.com> - 4.5.18-1
changelog:
  - build fix for newer kernel headers (#457291)
  - fix CLONE_VFORK handling (#455078)
  - Support new Linux/PPC system call subpage_prot and PROT_SAO flag.
  - In sigaction system call, display sa_flags value along with SIG_DFL/SIG_IGN.


author: Roland McGrath <roland@redhat.com> - 4.5.19-1
changelog:
  - New upstream release, work mostly by Dmitry V. Levin <ldv@altlinux.org>
    + exit/kill strace with traced process exitcode/signal (#105371);
    + fixed build on ARM EABI (#507576);
    + fixed display of 32-bit argv array on 64-bit architectures (#519480);
    + fixed display of 32-bit fcntl(F_SETLK) on 64-bit architectures (#471169);
    + fixed several bugs in strings decoder, including potential heap
      memory corruption (#470529, #478324, #511035).


author: Roland McGrath <roland@redhat.com> - 4.5.20-1
changelog:
  - New upstream release, work mostly by Andreas Schwab and Dmitry V. Levin.
    + fixed potential stack buffer overflow in select decoder (#556678);
    + fixed FTBFS (#539044).


author: Dmitry V. Levin <ldv@altlinux.org> - 4.8-1
changelog:
  - New upstream release:
    + fixed ERESTARTNOINTR leaking to userspace on ancient kernels (#659382);
    + fixed decoding of *xattr syscalls (#885233);
    + fixed handling of files with 64-bit inode numbers by 32-bit strace (#912790);
    + added aarch64 support (#969858).


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.7.8-1
changelog:
  - update to 0.7.8 (#981869)
  - drop backported patches (already included in 0.7.8)
  - no longer BuildRequires boost-devel
  - -devel: Requires: cmake for directory ownership


author: Avesh Agarwal <avagarwa@redhat.com> - 4.55-1
changelog:
  - New upstream realease 4.55
  - Updated local patches
  - enabled fips mode
  - Fixed for pod2man as it build-requires perl-podlators


author: Avesh Agarwal <avagarwa@redhat.com> - 4.56-1
changelog:
  - New upstream realease 4.56.
  - Updated local patches.
  - Fixed upstream URL in spec file.
  - Sourced URL of sha256 hash file in spec file.


author: Vít Ondruch <vondruch@redhat.com> - 1.7.8-6
changelog:
  - Rebuild for https://fedoraproject.org/wiki/Features/Ruby_2.0.0
  - Drop Ruby version checks from configuration script.
  - Fix and enable Ruby test suite.


author: Joe Orton <jorton@redhat.com> - 1.7.9-2
changelog:
  - try harder to avoid svnserve bind failures in ruby binding tests
  - enable verbose output for ruby binding tests


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.5-4
changelog:
  - added patches that fix & improve SSSD support (thanks to pbrezina@redhat.com)
  - re-enabled SSSD support
  - removed libsss_sudo dependency


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.6p3-2
changelog:
  - added upstream patch for a regression
  - don't include arch specific files in the -devel subpackage
  - ship only one sample plugin in the -devel subpackage


author: Daniel Kopecek <dkopecek@redhat.com> - 1.8.6p7-1
changelog:
  - update to 1.8.6p7
  - fixes CVE-2013-1775 and CVE-2013-1776
  - fixed several packaging issues (thanks to ville.skytta@iki.fi)
    - build with system zlib.
    - let rpmbuild strip libexecdir/*.so.
    - own the %{_docdir}/sudo-* dir.
    - fix some rpmlint warnings (spaces vs tabs, unescaped macros).
    - fix bogus %changelog dates.


author: Fabian Affolter <fabian@bernewireless.net> - 3-1
changelog:
  - Updated to new upstream version 3
  - Removed manual VCS checkout stuff
  - Added URL for Source0
  - Added translations


author: Fabian Affolter <fabian@bernewireless.net> - 8-1
changelog:
  - Updated to new upstream version 7
  - Added translation support
  - Removed all the vcs checkout stuff


author: Christoph Wickert <cwickert@fedoraproject.org> - 3.4.0-0.4.beta3
changelog:
  - Update to 3.4.0beta3 (#946898)
  - Add aarch64 support (#926591)
  - Make desktop file vendor conditional


author: Christoph Wickert <cwickert@fedoraproject.org> - 3.4.0-0.5.beta4
changelog:
  - Update to 3.4.0beta4 (#968437)
  - Remove patches for DSO fix and aarch64 support, no longer required


author: Tim Waugh <twaugh@redhat.com> 1.4-4
changelog:
  - Applied patches from Jiri Popelka:
    - Fix off-by-one error in call to readlink.
    - Fix possible buffer overrun found by coverity.


author: Nils Philippsen <nils@redhat.com> - 1.9.66-1
changelog:
  - improve enabling/disabling, starting/stopping NTP daemons, take care of the
    respective "other" NTP daemon as well (#743533)
  - pull updated translations


author: Nils Philippsen <nils@redhat.com> - 1.10.0-1
changelog:
  - use pkexec instead of consolehelper
  - read/write /etc/localtime as symbolic link and only fall back to using
    /etc/sysconfig/clock if it is present (#824033)


author: Nils Philippsen <nils@redhat.com> - 1.10.1-1
changelog:
  - don't trip over missing /etc/sysconfig/network file (#857412)
  - pull updated translations
  - install and use timezone translations properly


author: Nils Philippsen <nils@redhat.com> - 1.10.5-1
changelog:
  - pull updated and new translations (#878319)
  - catch (rare) errors from fork()
  - catch unavailable display (#766936)
  - pull updated time zones


author: Thomas Woerner <twoerner@redhat.com> 1.2.28-1
changelog:
  - added firewalld check to prevent usage of s-c-fw if firewalld is running
  - fixed gtk_label_autowrap not to change alignments
  - fixed port of libvirt-tls (rhbz#565625)
  - fixed requirement for newt-python (was newt before)
  - return -2 for ports > 65535 in fw_functions.getPortID for better port error
    reporting
  - hide dialogs before going on (rhbz#643966)
  - updated translations: ca, de, he, hi, ja, nb, pa, pt, sk, sv, ta, uk, zh_TW


author: Thomas Woerner <twoerner@redhat.com> 1.2.29-4
changelog:
  - fixed possible privilege escalation flaw via use of python pickle
    (CVE-2011-2520), replaced pickle by json (rhbz#717985) and (rhbz#722991)
  - stop D-BUS firewall mechanism on update


author: Arkady L. Shane <ashejn@yandex-team.ru> - 1.3.1-5.1.R
changelog:
  - Apply patches from itamarjp, landgraf, mschwendt to fix:
    - Needs pyhon-dbus: https://bugzilla.redhat.com/show_bug.cgi?id=708631
    - Missing OK button: https://bugzilla.redhat.com/show_bug.cgi?id=646041


author: Nils Philippsen <nils@redhat.com> - 1.3.1-12.R
changelog:
  - use consistent names for patches, create backup files
  - use polkit/pkexec instead of consolehelper
  - add man page


author: Parag Nemade <pnemade AT redhat DOT com> - 1.3.5-19
changelog:
  - Resolves:rh#886446 - system-config-language tracebacks in TUI mode
  - Resolves:rh#892560 - system-config-language only provides english in Fedora 18
  - Resolves:rh#889956 - include language Kashmiri Arabic


author: Parag Nemade <pnemade AT redhat DOT com> - 1.3.5-24
changelog:
  - Resolves:rh#956784 - Add Interlingua to the local-list file and include Interlingua localization to the package


author: Tim Waugh <twaugh@redhat.com> 1.4.1-4
changelog:
  - Removed old pointer/keyboard grabbing code as it no longer
    works (bug #971459).
  - Notify urgencies have new names with gi.repository (bug #970646).
  - More fixes for UTF-8 encoding issues (bug #969846, bug #971417).


author: Tim Waugh <twaugh@redhat.com> 1.4.1-6
changelog:
  - Use the right signal for spotting when editing is done when renaming
    a printer (bug #971404).
  - More fixes for UTF-8 encoding issues (bug #968142).
  - Fixed new printer dialog traceback (bug #969916).


author: Tim Waugh <twaugh@redhat.com> 1.4.1-8
changelog:
  - Fixed misplaced parenthesis (bug #979119).
  - Fixed another codec issue (bug #978970).
  - Avoid race when renaming printer (bug #975705).
  - Don't check for missing drivers in remote printers (bug #975058)
  - Another fix from the move to gi.repository (bug #973662).
  - Fixed another codec issue (bug #971973).


author: Nils Philippsen <nils@redhat.com> - 0.101.1-1
changelog:
  - version 0.101.1:
    - improve coping with systemd reloads
    - improve checking service types (systemd vs. legacy), don't try to call
      old-style methods on systemd units (#702086)
    - hide systemd units that aren't loaded (#702163)
    - improve dealing with xinetd package being removed


author: Nils Philippsen <nils@redhat.com> - 0.101.3-1
changelog:
  - version 0.101.3:
    - decode UTF-8 encoded unit names instead of vice versa (#717262)
    - pull updated translations


author: Nils Philippsen <nils@redhat.com> - 0.101.4-1
changelog:
  - version 0.101.4:
    - use systemd manager interface to reload xinetd (#732231)
    - pull updated translations


author: Nils Philippsen <nils@redhat.com> - 0.101.9-1
changelog:
  - version 0.101.9:
    - catch "file not found" exceptions while enabling/disabling units
    - catch gtk import errors (missing display, etc., #884944)


author: Nils Philippsen <nils@redhat.com> - 1.3.4-1
changelog:
  - don't ask libuser to create a home directory over an existing one (#908852,
    patch by Miloslav Trmač)
  - correct check if SELinux is enabled


author: Kevin Fenzi <kevin@scrye.com> 1.6.0-1
changelog:
  - Update to 1.6.0. 
  - See http://git.xfce.org/xfce/thunar/tree/NEWS?id=781395f339e13f4da7c69ac63caefeec451b6dea


author: Jaroslav Škarvada <jskarvad@redhat.com> - 5.1.2-9
changelog:
  - Add patch to fix CVE-2010-2642, CVE-2011-0433 (afm-fix patch)
  - New version of patch for CVE-2011-0764, also fixes CVE-2011-1552,
    CVE-2011-1553, CVE-2011-1554 (type1-inv-rw-fix patch)
    Resolves: rhbz#772899
  - Add explicit NVR requires to apps subpackage (consumes libt1(x).so)
  - Fix rpmlint warning (mixed-use-of-spaces-and-tabs)


author: Rex Dieter <rdieter@fedoraproject.org> 1.8-1
changelog:
  - taglib-1.8

  -* Sat Jul 21 2012 Fedora Release Engineering <rel-eng@lists.fedoraproject.org> - 1.7.2-2
  -- Rebuilt for https://fedoraproject.org/wiki/Fedora_18_Mass_Rebuild


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.17-34
changelog:
  - Add dist tag, fix buildroot, defattr, obsoletes, provides and summary,
    comment patches and sources
    Resolves: #226476


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.17-37
changelog:
  - Improve message with response directions to reflect new option
    for user names with dot character


author: Vitezslav Crhonek <vcrhonek@redhat.com> - 0.17-42
changelog:
  - Add systemd support (thanks to Zbigniew Jędrzejewski-Szmek and Jóhann B. Guðmundsson)
    Resolves: #737219


author: Pavel Raiskup <praiskup@redhat.com> - 2:1.26-19
changelog:
  - fix creating sparse pax archives containing files of effective
    size >8GB (#516309)
  - silence rpmlint (fix bad dates in changelog based on git log dates)


author: Pavel Raiskup <praiskup@redhat.com> - 2:1.26-20
changelog:
  - allow extracting single volume from multi-volume archive (#919897)
  - usrmove: /bin/tar ~> /usr/bin/tar, selinux handling edit


author: Pavel Raiskup <praiskup@redhat.com> - 2:1.26-21
changelog:
  - enable build for arm64 (#926610)
  - silence gcc warnings (lint fixes without risk from upstream) for RPMDiff


author: Pavel Raiskup <praiskup@redhat.com> - 2:1.26-23
changelog:
  - use /usr/bin/ssh as the default remote shell binary (#969015)
  - do not verbose-print xattrs when --no-xattrs option is used
  - do not override the config.{guess,sub} twice, this is already done by the
    redhat-rpm-config package (#951442)


author: Pavel Raiskup <praiskup@redhat.com> - 1.26-25
changelog:
  - the /etc/rmt seems to be the best place where to look for rmt binary (see the
    commit message in Fedora's cpio.git for more info)


author: Pavel Raiskup <praiskup@redhat.com> - 1.26-26
changelog:
  - add documenation for xattrs-like options (#996753)
  - the --xattrs-include implies --xattrs now (#965969)


author: Petr Machata <pmachata@redhat.com> - 3.0-1.20110419
changelog:
  - Rebase to 3.0-r6
    - Port both patches
    - Package Design_Patterns.pdf
    - Thanks to Richard Shaw for initial rebase patch
  - Resolves: #723043


author: Petr Machata <pmachata@redhat.com> - 4.0-4.20120408
changelog:
  - Rebase to 4.0 update 4
  - Refresh Getting_Started.pdf, Reference.pdf, Tutorial.pdf
  - Provide pkg-config files
  - Resolves: #825402


author: Petr Machata <pmachata@redhat.com> - 4.0-8.20120408
changelog:
  - Fix mfence patch.  Since the __TBB_full_memory_fence macro was
    function-call-like, it stole () intended for function invocation.


author: Michal Sekletar <msekleta@redhat.com> - 14:4.1.1-3
changelog:
  - Fix manpage (#663739)
  - Fix improper handling of bad date format in tcpslice (#684005)
  - Spec file clean up


author: Michal Sekletar <msekleta@redhat.com> - 14:4.2.0-1
changelog:
  - updated to 4.2.0
  - added new source file ppi.h, missing in upstream tarball
  - disabled make check because of missing .pcap files in testsuite
  - dropped unnecessary patches


author: Brian Pepple <bpepple@fedoraproject.org> - 0.6.0-1
changelog:
  - Update to 0.6.0
  - Drop python subpackage. gobject-introspection is used now.
  - Drop unnecessary buildroot cleaning in install section.
  - Update BR for farstream02-devel.


author: Brian Pepple <bpepple@fedoraproject.org> - 0.4.0-2
changelog:
  - Add patch to instantiate the media manager only if the protocol support calls.
  - Drop buildroot and clean section. No longer needed.


author: Brian Pepple <bpepple@fedoraproject.org> - 0.5.0-1
changelog:
  - Update to 0.5.0.
  - Drop media manager patch. Fixed upstream.
  - Bump minimum versions of libpurple and tp-glib needed.


author: Brian Pepple <bpepple@fedoraproject.org> - 1:5.14.1-1
changelog:
  - Update to 5.14.1.
  - Drop defattr. No longer needed.
  - Drop ignore gnome keyring patch. Fixed upstream.


author: Brian Pepple <bpepple@fedoraproject.org> - 0.5.2-1
changelog:
  - Update to 0.5.2.
  - Bump minimum version of tp-glib needed.
  - Drop olpc-activity-properties patch. Fix upstream.
  - Drop buildroot. No longer necessary
  - Drop no-xmldiff patch. No longer needed.


author: Adam Tkac <atkac redhat com> 1:0.17-51
changelog:
  - add "-debug6" option to telnetd (#rh674942)
  - telnet wasn't interruptable (^C) when started with specious -b argument (#704604)


author: Hans Ulrich Niedermann <hun@n-dimensional.de> - 4.30-1
changelog:
  - update to 4.30 release:
    - new size 22 (not very good)
    - 25 additional characters
    - various small fixes


author: Hans Ulrich Niedermann <hun@n-dimensional.de> - 4.30-2
changelog:
  - Added License tag to -console subpackage.
  - Added note about rebuilding initramfs after changing /etc/sysconfig/i18n.
  - Changed URL, SourceN, PatchN to use new location at sourceforge.net.


author: Jindrich Novy <jnovy@redhat.com> 2012-17-20130310
changelog:
  - run updmap-sys --syncwithtrees posttrans (#915086)
  - don't conflict with other packages (#913678)
  - obsolete tex-cm-lgc (#907728)
  - obsolete tex-kerkis (#907726)
  - fix clashes with xmltex (#877690)
  - use fedora latexmk instead of texlive latexmk (#914689)
  - fix broken symlinks in /usr/bin (#910952)
  - fmtutil doesn't print jadetex errors any more (#875266)
  - fix post scriptlets


author: Jindrich Novy <novyjindrich@gmail.com> - 2012-20-20130321
changelog:
  - bring chkweb back to life
  - fix context script (#924918)
  - prefer scripts installed from sources than from CTAN
  - BR: ghostscript-devel because of dvisvgm (#924662)


author: Jindrich Novy <novyjindrich@gmail.com> - 2012-21-20130427
changelog:
  - add missing shebang to context script
  - mark language.dat as config file (#929367)
  - add scripts for checking out sources and CTAN archives


author: Jindrich Novy <novyjindrich@gmail.com> - 2012-23-20130506
changelog:
  - don't conflict with ht package - ht binary is now called t4ht (#959696)
  - require coreutils (#928566)
  - update build scripts
  - update symlink references tetex -> texlive
  - handle texmf -> texmf-dist upstream move
  - do proper obsoletion again


author: Jindrich Novy <novyjindrich@gmail.com> - 2012-24-20130531
changelog:
  - fix luatex breakage (#959625)
  - fix updmap-sys calls (#968573, #968573)
  - fix broken dependencies for packages only shiping binaries/symlinks and nothing else
  - fix update path - obsolete dvipdfm (#968358)
  - pdfcrop now requires ghostscript (#964183)


author: Jindrich Novy <novyjindrich@gmail.com> - 2013-0.1-20130608
changelog:
  - formally switch to 2013 based on upstream
  - call updmap-sys and fmtutil-sys for map and format updates
  - bump epoch to be sure all noarch packages get updated


author: Daiki Ueno <dueno@redhat.com> - 0.5.0-2
changelog:
  - fix <test> usage in fontconfig files (Closes: #837538)
  - refresh fontconfig files with the latest upstream version


author: Daiki Ueno <dueno@redhat.com> - 0.5.0-4
changelog:
  - disable X fonts.dir generation
  - remove obsolete -compat subpackage
  - remove %defattr from %files
  - add missing "make" in %build


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.3.0-1
changelog:
  - Update to 0.3.0
  - Remove upstreamed extract-here.patch
  - Omit dependency on xarchiver and let users install their favorite archiver
  - Update icon-cache scriptlets


author: Adam Williamson <awilliam@redhat.com> - 0.1.2-8
changelog:
  - port to exo-1 and thunarx-2, fix an implicit linking issue, and
    a crash: all from Debian maintainer Lionel Le Folgoc


author: Tim Waugh <twaugh@redhat.com> 1.3.0-3
changelog:
  - Avoid PIDFile problems in systemd unit file (bug #983232).
  - libvnc.so: don't use unexported key_is_down function.
  - Don't use shebang in vncserver script.


author: Petr Pisar <ppisar@redhat.com> - 1.7-39
changelog:
  - Fix maximal RSS report (bug #702826)
  - Clean spec file
  - Recompute CPU usage at finer level (bug #527276)


author: German A. Racca <gracca@gmail.com> 0.11-1
changelog:
  - New version 0.11
  - Used %{cmake} to perform compilation
  - Compiled with examples enabled
  - Now really fixed BuildRequires


author: Tom "spot" Callaway <tcallawa@redhat.com> 1.000-2
changelog:
  - include license clarification email as doc
  - don't bother with common_desc macro
  - add Requires: fontpackages-filesystem
  - don't loop on a single fontconfig file
  - change fontconfig from "sans-serif" to "fantasy"


author: Miloslav Trmač <mitr@redhat.com> - 2.11-3
changelog:
  - Drop the cron.daily script, systemd default configuration handles the same
    places.
    Resolves: #906455


author: Ivan Afonichev <ivan.afonichev@gmail.com> 0:7.0.34-1
changelog:
  - Updated to 7.0.34
  - ecj >= 4.2.1 now required
  - Resolves: rhbz 889395 concat classpath correctly; chdir to $CATALINA_HOME


author: Ville Skyttä <ville.skytta@iki.fi> 0.15.2-2
changelog:
  - Build with XPS support, fix building with GNOME keyring support.
  - Be explicit about unicode=libunistring and disabling Qt.
  - Description spelling fixes (BZ #902549).


author: Rahul Sundaram <sundaram@fedoraproject.org> - 2.76-1
changelog:
  - upstream release 2.76
  - https://trac.transmissionbt.com/wiki/Changes#version-2.76
  - use rpm ld_flags for qt build. resolves rhbz#868502
  - use upstream transmission-qt.desktop file. resolves rhbz#799673
  - remove -T parameter from the systemd file. resolves rhz#823220


author: Dominik Mierzejewski <rpm@greysector.net> 0.3.8-1
changelog:
  - updated to 0.3.8
  - rebuild autofiles to get rid of rpath
  - disable static library build
  - fix manpage encoding
  - fix HTML docs line endings


author: Dominik Mierzejewski <rpm@greysector.net> 0.3.12-1
changelog:
  - updated to 0.3.12
  - updated source URL
  - split off libs to avoid multilib conflicts
  - move docs processing to prep to avoid problems with shortcut builds
  - update license tag


author: Petr Machata <pmachata@redhat.com> - 2013b-1
changelog:
  - Upstream 2013b
    - Paraguay will end DST on March 24 this year
    - Haiti uses US daylight-saving rules this year
    - Morocco does not observe DST during Ramadan
  - Upstream 2013a
    - Retire Chile patch, 2013a has the data
    - New Zones Asia/Khandyga, Asia/Ust-Nera, Europe/Busingen
    - Many changes in historical timestamps


author: Petr Machata <pmachata@redhat.com> - 2013c-1
changelog:
  - Upstream 2013c
    - Sync past stamps for Palestine and West Bank with timeanddate.com
    - Assume that the recent change to Paraguay's DST rules is permanent
    - Macquarie was uninhabited between 1919 and 1948.  It's also part
      of Australia (update in zone.tab).


author: Petr Machata <pmachata@redhat.com> - 2013c-2
changelog:
  - Update descriptions in iso3166.tab; make Jerusalem coordinates in
    zone.tab more precise
    (0001-Adjust-commentary-to-try-to-defuse-recent-issues-som.patch)
  - Update local mean time for Jerusalem to match more-precise longitude
    (0002-asia-Asia-Jerusalem-Fix-LMT-to-match-more-precise-lo.patch)
  - Move Morocco's midsummer 2013 transitions
    (0003-Move-Morocco-s-midsummer-2013-transitions.patch)
  - Israel now falls back on the last Sunday of October
    (0004-Israel-now-falls-back-on-the-last-Sunday-of-October.patch)


author: Patsy Franklin <pfrankli@redhat.com> 2013h-1
changelog:
  - Rebase to 2013h 
    - Lybia switched to using UTC+2 without DST
    - Western Sahara (Africa/ElAaiun) uses Morocco's DST rules
    - Acres and Amazon swithc to UTC-4 and UTC-5 on 2013-11-10
    - Add entries for DST transition in Morocco in the year 2038


author: Dennis Gilmore <dennis@ausil.us> - 2013.04-5
changelog:
  - add patches to support ext filesystems in exynos and omap SPL's
  - drop bringing in arm-boot-config on arm systems
  - build a highbank u-boot (intention is to use in qemu)
  - add wandboard quad u-boot


author: Pravin Satpute <psatpute@redhat.com> - 0.3-1
changelog:
  - initial packaging
  - these fonts was there in bitmap-fonts package previously, packaging it separate as per merger review suggetion.


author: Gerard Ryan <galileo@fedoraproject.org> - 2.0.5-2
changelog:
  - Fix rpmlint issues: source urls; tabs and space warnings
  - Remove BuildDate.txt and ReleaseNotes.html from javadoc
  - Drop -version from javadoc install path
  - Change group to Development/Libraries
  - Remove defattr(-,root,root,-)
  - Remove rm -rf RPM_BUILD_ROOT


author: Gerard Ryan <galileo@fedoraproject.org> - 2.0.5-4
changelog:
  - Remove Bundle-Classpath from MANIFEST.MF
  - Update Source0 URL so it's not just relying on one mirror


author: David Zeuthen <davidz@redhat.com> - 1.0.4-2.fc19
changelog:
  - Add patch to neuter the annoying systemd behavior where stdout/stderr
    is sent to the system logs (#743344)


author: Daiki Ueno <dueno@redhat.com> - 1.0.2-0.13.080608
changelog:
  - assign higher priority (65- -> 65-0-) to .conf files to avoid the
    effects of 65-nonlatin.conf
  - remove binding="same" from .conf files


author: Daiki Ueno <dueno@redhat.com> - 1.0.2-0.14.080608
changelog:
  - add "ko" as well as "ko-kr" to the lang test of .conf files to avoid
    some glyphs to be rendered with wqy-zenhei-fonts


author: Daiki Ueno <dueno@redhat.com> - 1.0.2-0.18.080608
changelog:
  - update the priority for the Korean default font change
    nhn-nanum-fonts -> 65-0, un-core-fonts -> 65-1, baekmuk-ttf-fonts -> 65-2
  - drop buildroot cleanup
  - drop %defattr(0644,root,root,0755) from %files


author: Paul Wouters <pwouters@redhat.com> - 1.4.20-6
changelog:
  - Updated to 1.4.20
  - Build with full RELRO (not use -z,relro but with -z,relo,-z,now)
  - Fixup man page for unbound-control-setup
  - unbound.service should start before nss-lookup.target (rhbz#919955)
  - Removed patch for rhbz#888759 merged in upstream
  - Move root.anchor to /var/lib/unbound to make selinux policy easier for updating (rhbz#896599/rhbz#891008)
  - Move cronjob for root.anchor from unbound to unbound-libs, require crontabs
  - /etc/unbound (and all) should be owned by unbound-libs (rhbz#909691)
  - Remove Obsolete/Provides for dnssec-conf which was last seen in f13
  - Ensure any unbound-anchor failure in post is ignored
  - Use install -p to prevent .rpmnew files that are identical to originals


author: Paul Wouters <pwouters@redhat.com> - 1.4.20-9
changelog:
  - Enable round-robin (with noths() patch)
  - Use /var/lib/unbound/root.key (more consistent with other distros)
  - Enable minimal responses


author: Paul Wouters <pwouters@redhat.com> - 1.4.21-1
changelog:
  - Updated to 1.4.21,
  - Remove unbound-rootkey.service (happens via cron in unbound-libs)
  - Enabled new max-udp-size: 3072 (so ANY isc.org won't fit)
  - Removed patched merged in by upstream
  - Enable statistics-cumulative for munin-plugin
  - Added outgoing-port-avoid: 0-32767 conformant to SElinux restrictions
  - Updated unbound.conf


author: Pavel Alexeev <Pahan@Hubbitus.info> - 2.0-0.1.svn340
changelog:
  - First attempt packaging 2.0 version. Igor Novikov said in mail it is almost ready.
  - New build with hope to fix compatability with python-pillow instead of PIL (by author mail)
  - Add BR lcms2-devel
  - Add script to get tarball from svn.
  - Replace $RPM_BUILD_ROOT by %{buildroot}
  - Add BR pycairo-devel, python-pillow-devel
  - Add require python-pillow
  - Drop 1.x branch patches.
  - Spec cleanup.


author: Tom Callaway <spot@fedoraproject.org> - 2.0-0.2.svn344
changelog:
  - fix tarball generation script to remove non-free sRGB.icm
  - update to cleaned svn344 tarball
  - use Public Domain sRGB.icm from argyllcms


author: Tom Lane <tgl@redhat.com> 2.3.1-1
changelog:
  - Update to version 2.3.1.  The main externally-visible change is that the
    GUI programs are not part of the unixODBC tarball anymore, so they are no
    longer in this package, and the unixODBC-kde sub-RPM has disappeared.
    There is a separate package unixODBC-gui-qt that now provides those programs.


author: Karel Klic <kklic@redhat.com> - 6.0-2
changelog:
  - Fixed a buffer overflow (rhbz#532380, unzip-6.0-attribs-overflow.patch)
  - Generate debuginfos (rhbz#540220, unzip-6.0-nostrip.patch)


author: Fedora Release Engineering <rel-eng@lists.fedoraproject.org>
changelog:
  - Rebuilt for https://fedoraproject.org/wiki/Fedora_17_Mass_Rebuild

  - Fix minor manpage spelling mistake
    Resolves: #675454


author: Tom Callaway <spot@fedoraproject.org> - 6.0-9
changelog:
  - Apply changes to match.c to sync with recmatch from util.c (from zip 3.0)
    This also resolves the license issue in that file.


author: Richard Hughes <rhughes@redhat.com> - 0.9.16-1
changelog:
  - New upstream release
  - Install a systemd service file
  - Clamp the UPS percentage from 0 to 100 to fix syslog spam
  - Correct the cap on the energy rate
  - Fix crash in up_device_csr_finalize
  - Never detect HID devices with batteries as power supplies
  - Re-coldplug dock status when resuming from sleep


author: Richard Hughes <rhughes@redhat.com> - 0.9.17-1
changelog:
  - New upstream release
  - Don't allow non-power-supply devices to set the OnBattery property
  - Fix the LatencyChanged signal
  - Fix wrong PowerSupply property for devices without a scope sysfs attribute
  - Treat the battery state 'not charging' as PENDING_CHARGE


author: Richard Hughes <rhughes@redhat.com> - 0.9.19-1
changelog:
  - New upstream release
  - Add a Documentation tag to the service file
  - Add support for Logitech Unifying devices
  - Do not continue to poll if /proc/timer_stats is not readable
  - Fix device matching for recent kernels
  - Resolves: #848521


author: Richard Hughes <rhughes@redhat.com> - 0.9.20-1
changelog:
  - New upstream release
  - Factor out the Logitech Unifying support to support other devices
  - Fix batteries which report current energy but full charge
  - Fix several small memory leaks


author: Dan Williams <dcbw@redhat.com> 1.2.3-1
changelog:
  - Update to new upstream release
  - Build TCL tool as a static binary to remove dependency on TCL itself rhbz#760839


author: Thomas Haller <thaller@redhat.com> 1.2.7-3
changelog:
  - Add manual page for usb_modeswitch_dispatcher and fix errors in
    manual page of usb_modeswitch (rhbz#948451, rhbz#884203).


author: Rahul Sundaram <sundaram@fedoraproject.org> 20110227-1
changelog:
  - New upstream release.  Resolves rhbz#654800
  - Update spec to match current guidelines
  - Some spec file fixes from Alexander Todorov. Resolves rhbz#632559
  - Drop patch


author: Hans de Goede <hdegoede@redhat.com> - 0.6-3
changelog:
  - Fix usbredirserver not listening for ipv6 connections (rhbz#957470)
  - Fix a few (harmless) coverity warnings


author: Hans de Goede <hdegoede@redhat.com> - 0.6-5
changelog:
  - Use the new libusb autodetach kernel driver functionality
  - Fix a usbredirparser bug which causes tcp/ip redir to not work (rhbz#1005015)


author: Miloslav Trmač <mitr@redhat.com> - 1.107-1
changelog:
  - Update to usermode-1.107
    Resolves: #668731
  - Add UGROUPS=wheel to config-util
    Resolves: #688690


author: Miloslav Trmač <mitr@redhat.com> - 1.110-1
changelog:
  - Update to usermode-1.110.
    Note that this drops halt/poweroff/reboot helpers, the respective
    implementations in systemd now include PolicyKit support.  Spec file change
    based on a patch by Lennart Poettering <lpoetter@redhat.com>.
    Resolves: #804088, #849208


author: Tom Callaway <spot@fedoraproject.org> - 1:3.13.7.5-1
changelog:
  - update to 3.13.7.5 (needed for chromium 23)
  - Resolves multiple security issues (CVE-2012-5120, CVE-2012-5128)
  - d8 is now using a static libv8, resolves bz 881973)


author: T.C. Hollingsworth <tchollingsworth@gmail.com> - 1:3.14.5.8-1
changelog:
  - new upstream release 3.14.5.8
  - backport security fix for remote DoS via crafted javascript (RHBZ#924495; CVE-2013-2632)


author: T.C. Hollingsworth <tchollingsworth@gmail.com> - 1:3.14.5.10-2
changelog:
  - backport fix for remote DoS or unspecified other impact via type confusion
    (RHBZ#991116; CVE-2013-2882)


author: Mark Wielaard <mjw@redhat.com> 3.8.1-8
changelog:
  - Add valgrind-3.8.1-sendmsg-flags.patch
  - Add valgrind-3.8.1-ptrace-setgetregset.patch
  - Add valgrind-3.8.1-static-variables.patch


author: Mark Wielaard <mjw@redhat.com> 3.8.1-10
changelog:
  - Don't disable -debuginfo package generation, but do undefine
    _missing_build_ids_terminate_build.


author: Mark Wielaard <mjw@redhat.com> 3.8.1-13
changelog:
  - Fix quoting in valgrind valgrind-3.8.1-enable-armv5.patch and
    remove arm configure hunk from valgrind-3.8.1-text-segment.patch #947440
  - Replace valgrind-3.8.1-text-segment.patch with upstream variant.
  - Add valgrind-3.8.1-regtest-fixlets.patch.


author: Mark Wielaard <mjw@redhat.com> 3.8.1-14
changelog:
  - fixup selinux file context when doing a scl build.
  - Enable regtest suite on ARM.
  - valgrind-3.8.1-abbrev-parsing.patch, drop workaround, enable real fix.
  - Fix -Ttext-segment configure check. Enables s390x again.
  - BuildRequire ps for testsuite.


author: Mark Wielaard <mjw@redhat.com> 3.8.1-15
changelog:
  - Add valgrind-3.8.1-zero-size-sections.patch. Resolves issues with zero
    sized .eh_frame sections on ppc64.


author: <sshedmak@redhat.com> - 1.1.2-1
changelog:
  - Fixed FSType, Preferred Styles, UniqueID and Fullname
  - Fixed Invalid Glyph Names reported by fontlint
  - with exceptions string added in License


author: Karsten Hopp <karsten@redhat.com> 7.4.5-1
changelog:
  - patchlevel 5
  - when closing a window fails ":bwipe" may hang
  - "vaB" while 'virtualedit' is set selects the wrong area


author: Karsten Hopp <karsten@redhat.com> 7.4.009-1
changelog:
  - patchlevel 009
    mkdir("foo/bar/", "p") gives an error message
    creating a preview window on startup messes up the screen
    new regexp engine can't be interrupted
    too easy to write a file was not decrypted (yet)


author: Cole Robinson <crobinso@redhat.com> - 0.9.5-1
changelog:
  - Rebased to version 0.9.5
  - Enable adding virtio-scsi disks (Chen Hanxiao) (bz 887584)
  - Support security auto-relabel setting (Martin Kletzander)
  - Support disk iotune settings (David Shane Holden)
  - Support 'reset' as a reboot option (John Doyle)
  - Don't pull in non-native qemu packages on first run (bz 924469)
  - Don't create LVM volumes with alloc=0, it doesn't work (bz 872162)
  - Fix storage browser hang on KDE (bz 880781)
  - Fix package installation on KDE (bz 882024)


author: Cole Robinson <crobinso@redhat.com> - 0.10.0-0.2.gitb68faac8
changelog:
  - Fix dep on vte3 (bz #958945)
  - Fix dep on virt-manager-common (bz #958730)
  - Fix crash when installing from ISO media (bz #958641)
  - Fix poor error reporting with unknown CLI option (bz #958730)


author: Cole Robinson <crobinso@redhat.com> - 0.10.0-0.5.gitde1695b2
changelog:
  - Fix default graphics, should be spice+qxl (bz #965864)
  - Check for libvirt default network package on first run (bz #950329)
  - Fix changing VM cirrus->QXL (bz #928882)


author: Cole Robinson <crobinso@redhat.com> - 0.10.0-1
changelog:
  - Rebased to version 0.10.0
  - Fix screenshots (bz #969410)
  - Add Fedora 19 osdict option (bz #950230)
  - Fix loading libguestfs OS icons (bz #905238)
  - Make packagekit search cancellable (bz #973777)
  - Fix freeze on guest shutdown if serial console connected (bz #967968)


author: Cole Robinson <crobinso@redhat.com> - 0.10.0-2
changelog:
  - Fix parsing rawhide .treeinfo (bz #989162)
  - Fix spice with TLS (bz #904295)
  - Reduce impact of memory leak (bz #972371)


author: Rex Dieter <rdieter@fedoraproject.org> 1:6.1.4-4
changelog:
  - make proper optimized build 
  - -utils: include both normal and iodbc variants
  - -utils: include -vt symlinks for compatiblity with opensuse packaging


author: Nicolas Chauvet <kwizart@gmail.com> - 2.0.5-6
changelog:
  - Move %{_datadir}/vlc/lua/http/.hosts to hosts-sample to avoid
    config file - https://bugzilla.rpmfusion.org/2726


author: Akira TAGOH <tagoh@redhat.com> - 20121230-2
changelog:
  - Drop -common package and keep consistent state of the directory
    by using the macro. (#893789)
  - Drop old Obsoletes and Provides line.


author: Christian Krause <chkr@fedoraproject.org> - 0.5.3-13.svn457
changelog:
  - Use tmpfiles.d service to correctly handle /var/run/vpnc (#656719)
  - Update vpnc-script:
    - fix negative MTU (#693235)
    - use restorecon to relabel /dev/net and /var/run/vpnc (#731382)
  - Various minor spec file cleanup


author: Jon Ciesla <limburgher@gmail.com> - 0.28.2-5
changelog:
  - Added URL, fixed whitespace for Merge Review BZ 226534.
  - Commented on odd provides for rpmlint warning.


author: Parag <pnemade AT redhat DOT com> - 0.5.3-8
changelog:
  - Resolves:rh#885940 - suggestions for further improvements
  - Drop w3m-0.4.1-helpcharset.patch as default encoding works fine
  - Drop w3m-0.5.1-gcc4.patch as compilation works fine without it


author: Parag <pnemade AT redhat DOT com> - 0.5.3-10
changelog:
  - Resolves:rh#885590 - w3mhelp-funcdesc.ja.pl contains broken Japanese
  - Fix the parallel make support patch


author: Peter Lemenkov <lemenkov@gmail.com> 4.60.1-1
changelog:
  - Version 4.60.1 (bugfix release)
  - Added man-pages
  - The only patch was rebased
  - Small cosmetic spec-file cleanups


author: Tomas Popela <tpopela@redhat.com> 1.10.2-6
changelog:
  - Add upstream patch for RH bug #908143 - AccessibilityTableRow::parentTable crash
  - Add fix for bug #907432 - Rendering glitches on some sites


author: Tomas Popela <tpopela@redhat.com> - 2.0.0-1
changelog:
  - Update to 2.0.0
  - Update BR versions
  - Drop unused patches
  - Change spec structure to webkitgtk3 spec file


author: Tomas Hozza <thozza@redhat.com> 1.14-3
changelog:
  - Added libuuid-devel to BuildRequires to use libuuid functions
    in "src/warc.c" functions (#865421)


author: Tomas Hozza <thozza@redhat.com> - 1.14-5
changelog:
  - Added BuildRequires: perl-podlators for pod2man
  - Patched manpage to silent new Tex errors
  - Resolves: (#914571)


author: Tomas Hozza <thozza@redhat.com> - 1.14-8
changelog:
  - Fix deadcode and possible use of NULL in vprintf (#913153)
  - Add documentation for --regex-type and --preserve-permissions
  - Fix --preserve-permissions to work as documented (and expected)
  - Fix bug when authenticating using user:password@url syntax (#912358)
  - Document and fix --backups option


author: Bill Nottingham <notting@redhat.com> - 1.5.2-2.20110419git6718941c
changelog:
  - update to upstream tagged 1.5.2
  - fix assorted issues from package review
  - don't handle dhclient ourselves


author: Tom "spot" Callaway <tcallawa@redhat.com> 001.001-2
changelog:
  - unzip manually to avoid leaving stray directories
  - split off shadow fontface into subpackage
  - mark fontconfig files as sans-serif


author: Karel Zak <kzak@redhat.com> - 3.0-13
changelog:
  - fix #428582 - linux.words contains misspelled word "flourescent"
  - fix #440146 - misspelled word in /usr/share/dict/words (architecure)


author: Karel Zak <kzak@redhat.com> - 3.0-14
changelog:
  - fix #457309 - contains both 'unnecessary' and 'unneccesary'
  - fix #470921 -"Barack" and "Obama" are not in /usr/share/dict/words
  - update spec file (#226542 - Merge Review)


author: Peng Wu <pwu@redhat.com> - 0.2.0-0.3.beta
changelog:
  - get rid of binding="same", fixes [rhbz#578050] (New: lang-specific overrides rule doesn't work as expected).


author: Peng Wu <pwu@redhat.com> - 0.2.0-0.4.beta
changelog:
  - Improves Simplified Chinese and Traditional Chinese fonts.
    In order to keep the WenQuanYi Zen Hei as default Simplified Chinese font,
    the fontconfig file of this WenQuanYi Micro Hei font is removed.


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.0.1-17
changelog:
  - Versionless jars and javadocs
  - Add jpackage-utils Requires to javadoc subpackage
  - Add alternative depmap groupId


author: Roland Grunberg <rgrunber@redhat.com> 0:0.5.2-1
changelog:
  - Update to 0.5.2.
  - Remove xmldb-api due to deprecation.
  - Fix ws-jaxme-ant-scripts.patch to apply cleanly.


author: Gerard Ryan <galileo@fedoraproject.org> - 0:1.6.2-5
changelog:
  - Fix file encoding for wsdl4j-MANIFEST.MF
  - Update Bundle-Version in OSGi manifest
  - Fix installation of jars in specfile
  - Clean up specfile - remove javadoc dir version; remove clean section


author: Rahul Sundaram <sundaram@fedoraproject.org> - 1.2.9-1
changelog:
  - 1.2.8 broke binary compatibility but was never imported in Fedora. 1.2.9 fixes it
  - Fix bug 10025: Segfault trying to parse certain word documents (Jean Brefort)
  - Fix bug 12746: Tables not imported from MS Word documents (Martin Sevior)
  - Fix Bug 11433 wvWare hangs on this seemingly blank word doc (Martin Sevior)
  - Buildfix: Remove unused LINK_WIN32_DLL check (Fridrich Strba)
  - Buildfix: link with -no-undefined (Fridrich Strba)


author: Ondrej Vasik <ovasik@redhat.com> - 1.61-2
changelog:
  - Merge review cleanup (#226546), comment patches, license
    to LGPLv2+, specify names in files section...


author: Sérgio Basto <sergio@serjux.com> - 0.125-4.20121006git68dfb7b
changelog:
  - Note: no source update.
  - Just add git tag to package name, for faster check upstream.
  - Add git tag in x264-snapshot.sh .
  - Convert all defines in global.


author: Sérgio Basto <sergio@serjux.com> - 0.129-1.20130119git9c4ba4b
changelog:
  - Update to 9c4ba4bde8965571159eae2d79f85cabbb47416c, soname bump.
  - Changed branch name by api number, is more readable.
  - Drop upstreamed patch.


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:2.7.1-15
changelog:
  - Add NOTICE.txt file to subpackages
  - Remove bundled sources of other packages used to build javadocs


author: Mikolaj Izdebski <mizdebsk@redhat.com> - 0:2.7.1-17
changelog:
  - Remove classpaths from manifests, resolves: rhbz#575635
  - Remove jlex from classpath
  - Fix source URL to archive.apache.org
  - Don't mix spaces and tabs in spec file
  - Fix end-of-line encoding of some documentation files


author: Remi Collet <remi@fedoraproject.org> - 1.2.8-2
changelog:
  - build against PHP 5.4
  - fix php ABI check
  - extension not loadable, must be fixed
  - add filter for private-shared-object-provides


author: Parag Nemade <paragn AT fedoraproject DOT org> - 0.5.2-15
changelog:
  - Remove vendor tag from desktop file as per https://fedorahosted.org/fesco/ticket/1077
  - Cleanup spec as per recently changed packaging guidelines


author: Thomas Moschny <thomas.moschny@gmx.de> - 0.3.8-2
changelog:
  - Specfile cleanups as suggested in the review.
  - Remove unneeded BR on pkgconfig.
  - Remove unneeded chrpath call.


author: Kalev Lember <kalevlember@gmail.com> - 0.9-1
changelog:
  - Update to 0.9
  - Adjust BuildRequires to build with gtk3
  - Drop lxde patch, merged upstream
  - Validate the desktop file


author: Rex Dieter <rdieter@fedoraproject.org> 1.1.0-0.10.20110714git
changelog:
  - fix gnome-screensaver detection bogosity (#702540,#736159)
  - xdg-open: x-www-browser: command not found (#755553)
  - drop htmlview hackage


author: Jerry James <loganjerry@gmail.com> - 21.5.32-1
changelog:
  - New upstream version
  - Drop upstreamed patches
  - Running autoconf no longer necessary
  - Drop conditionals for ancient versions of Fedora
  - Package X versions of lib-src binaries to get gnuclient linked with -lXau


author: Jerry James <loganjerry@gmail.com> - 21.5.33-5
changelog:
  - Add -texinfo patch to fix problems with texinfo 5 (bz 923365)
  - Add -aarch64 patch (bz 926766)
  - Build with libdb version 5
  - Emacs started shipping cl and widget info files, so we drop them


author: Jerry James <loganjerry@gmail.com> - 21.5.34-1
changelog:
  - New upstream version
  - Drop upstreamed -menubar, -aarch64, and -texinfo patches
  - Drop unnecessary sed BR


author: Michael Young <m.a.young@durham.ac.uk> - 4.2.2-6
changelog:
  - Information leak on XSAVE/XRSTOR capable AMD CPUs
    [XSA-52, CVE-2013-2076] (#970206)
  - Hypervisor crash due to missing exception recovery on XRSTOR
    [XSA-53, CVE-2013-2077] (#970204)
  - Hypervisor crash due to missing exception recovery on XSETBV
    [XSA-54, CVE-2013-2078] (#970202)
  - Multiple vulnerabilities in libelf PV kernel handling
    [XSA-55] (#970640)


author: Michael Young <m.a.young@durham.ac.uk> - 4.2.2-10
changelog:
  - XSA-45/CVE-2013-1918 breaks page reference counting [XSA-58,
    CVE-2013-1432] (#978383)
  - let pygrub handle set default="${next_entry}" line in F19 (#978036)
  - libxl: Set vfb and vkb devid if not done so by the caller (#977987)


author: Michael Young <m.a.young@durham.ac.uk> - 4.2.3-1
changelog:
  - update to xen-4.2.3
    includes fix for [XSA-61, CVE-2013-4329] libxl partially sets up HVM
    passthrough even with disabled iommu
  - remove included or unnecessary patches


author: Michael Young <m.a.young@durham.ac.uk> - 4.2.3-3
changelog:
  - Set "Domain-0" label in xenstored.service systemd file to match
    xencommons init.d script.
  - security fixes (#1013748)
    Information leaks to HVM guests through I/O instruction emulation
      [XSA-63, CVE-2013-4355]
    Information leak to HVM guests through fbld instruction emulation
      [XSA-66, CVE-2013-4361]


author: Michael Young <m.a.young@durham.ac.uk> - 4.2.3-4
changelog:
  - security fixes (#1017843)
    Information leak through outs instruction emulation in 64-bit PV guests
      [XSA-67, CVE-2013-4368]
    possible null dereference when parsing vif ratelimiting info
      [XSA-68, CVE-2013-4369]
    misplaced free in ocaml xc_vcpu_getaffinity stub
      [XSA-69, CVE-2013-4370]
    use-after-free in libxl_list_cpupool under memory pressure
      [XSA-70, CVE-2013-4371]
    qemu disk backend (qdisk) resource leak (Fedora doesn't build this qemu)
      [XSA-71, CVE-2013-4375]


author: Kalev Lember <kalev@smartlink.ee> 3.0.1-16
changelog:
  - Reintroduce a patch for CVE-2009-1885
  - Don't build static library
  - Use parallel make
  - Spec file clean up


author: Kalev Lember <kalev@smartlink.ee> - 3.1.1-1
changelog:
  - Update to 3.1.1
  - Dropped CVE-2009-1885 patch.
  - Use dos2unix -k instead of unrecognized option -U
  - Removed the multilib conflict workaround as Xerces_autoconf_config.hpp
    no longer contains the conflicting XERCES_SIZEOF_LONG define.


author: Marek Goldmann <mgoldman@redhat.com> - 2.11.0-5
changelog:
  - Use non-versioned jar name, RHBZ#800463
  - Cleanup in spec file to follow new guidelines
  - Consolidated javadocs packages
  - Removed manual subpackage because of stylebook issues, see comment on obsolete


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.4.3-10
changelog:
  - Fix crash when creating directory (#639804, #676086 and #851900)
  - Fix crash when adding lots of files (#669971)
  - Make sure desktop file validates


author: Kevin Fenzi <kevin@scrye.com> 4.10.0-5
changelog:
  - Add patch to fix segfault with icon theme handling
  - https://bugzilla.xfce.org/show_bug.cgi?id=9730


author: Adam Williamson <awilliam@redhat.com> - 0.0.5-3
changelog:
  - 01_typo-linking.patch: fix a typo (from Debian)
  - 02_explicit-linking-to-libxfcegui4.patch: fix linking (from Debian)


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.0.5-5
changelog:
  - Fix icon in 'Add new panel item' dialog (#694903)
  - Fix Source0 URL
  - Update translations from Xfce Transifex


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.2.1-1
changelog:
  - Update to 1.2.1
  - Drop all patches
  - New BR xorg-x11-xproto-devel and libXtst-devel
  - No longer BR libglade2-devel
  - No longer require xfce4-doc (#721291)


author: Christoph Wickert <cwickert@fedoraproject.org> - 3.4.0-1
changelog:
  - Update to 3.4.0
  - Remove upstreamed initialize-timer patch
  - Remove icon hack as utilities-system-monitor is a valid XDG named icon


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.2.1-3
changelog:
  - Fix crash in handle_error. Thanks to Ricky Zhou (#706677)
  - Remove obsolete BuildRequires libglade2-devel


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.2.2-6
changelog:
  - Remove obsolete libsexy checks
  - Add patch to avoid flickering
  - Add patch to support image URI locations
  - Make xfce4-notifyd-config show up in xfce4-settings-manager


author: Christoph Wickert <cwickert@fedoraproject.org> - 4.8.6-2
changelog:
  - Fix directory menu plugin's 'Open in Terminal' option (#748226)
  - No longer depend on xfce4-doc (#721288)


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.4.0-1
changelog:
  - Update to 1.4.0 (fixes #757180)
  - Bring back the icon naming patch
  - No longer require Thunar (not using thunar-vfs any more)


author: Kevin Fenzi <kevin@scrye.com> 1.2.0-8
changelog:
  - Add patch to use systemd methods for suspend/hibernate instead of upower. 
  - Upsteam bug: https://bugzilla.xfce.org/show_bug.cgi?id=9963


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.9.4-7
changelog:
  - Make new apps appear on the correct screen (bugzilla.xfce.org 4323)
  - Apply settings without restarting the plugin (bugzilla.xfce.org #3782)
  - Add missing english translation (bugzilla.xfce.org #3783)
  - Update default config for Xfce 4.6 (bugzilla.xfce.org #5752)


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.8.1-1
changelog:
  - Update to 1.8.1
  - Upstream build fixes: Build plugin as module, no versioned libs,
    only export needed symbols
  - Add aarch64 support (#926787)
  - Increase transparency of selection background (bugzilla.xfce.org #9592)


author: Christoph Wickert <cwickert@fedoraproject.org> - 1.0.0-4
changelog:
  - Fix FTBFS. Thanks to Johannes Lips for the patch (#715838)
  - Improve ACPI support. Thanks to Raphael Groner for the patches (#661933)


author: Kevin Fenzi <kevin@scrye.com> 4.10.0-4
changelog:
  - Add upstream commit to fix session saves with 2 or more apps that ask to save. 
  - https://bugzilla.xfce.org/show_bug.cgi?id=5379


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.6.1-7
changelog:
  - Fix segfault when creating plugin in 4.8 panel (#682458)
  - Update translations from Xfce Transifex


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.5.4.3-2
changelog:
  - Build against libxfce4ui instead of libxfcegui4
  - Make xfce4-panel version dependency conditional
  - Add VCS tag
  - Spec file cleanup


author: Christoph Wickert <cwickert@fedoraproject.org> - 0.5.5-1
changelog:
  - Update to 0.5.5 (fixes #838373 and #926797)
  - Also fixes several crashes: #834879, #869213, #870175, #901423, #904959


author: Kevin Kofler <Kevin@tigcc.ticalc.org> 1.1.20-1
changelog:
  - update to 1.1.20 (#753758)
  - use .xz tarball
  - drop old conditionals
  - drop ESD (esound) support on F17+ (native PulseAudio just works)
  - drop autotools patch, run autogen.sh in %prep instead
  - drop unused deepbind patch
  - drop xvmclib_header patch, fixed upstream
  - use the system libdvdnav (and libdvdread) instead of the bundled one
  - fix system libdvdnav support to also link libdvdread
  - plugin ABI is now 1.30


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 1.1.20-3
changelog:
  - --disable-musepack, avoids building the unused bundled libmusepack (the
    musepack plugin (using the system lib) is included in the Fedora xine-lib)


author: Kevin Kofler <Kevin@tigcc.ticalc.org> 1.1.20.1-1
changelog:
  - update to 1.1.20.1 (bugfix release, matches Fedora xine-lib)
  - drop upstreamed link-libdvdread and system-a52dec patches


author: Peter Hutterer <peter.hutterer@redhat.com> - 2.7-3
changelog:
  - Rebuild with fixed xkbcomp, re-create the right directory listing (not
    that anyone actually uses it)


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-5
changelog:
  - Added support for CONFIG_PPPOL2TP by sigwall <fionov@gmail.com>
  - Require current ppp because some old versions lacked pppol2tp.so plugin


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-6
changelog:
  - Added patch for xl2tpd.conf to improve interop settings
    (no longer need to say "no encryption" on Windows)
  - Improved patch, more doc fixed (esp. "force userspace" option)
  - don't use old version of if_pppol2tp.h


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-7
changelog:
  - Moved modprobe code from daemon to initscript/systemd
    (SElinux does not allow a daemon to do this, see rhbz#832149)


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-8
changelog:
  - The l2tp_ppp kernel module is now in kernel-module-extra
    (rhbz#832149)
  - Don't insist on openswan, some ISPS use L2TP without IPsec
  - Don't call grantpt(), it's not needed and triggers SElinux
    block (rhbz#834861)


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-9
changelog:
  - Rename non-existing openswan.service to ipsec.service (rhbz#836783)
  - Start after ipsec.service, but do not require it


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-10
changelog:
  - Updated comments in config files on how to authenticate against
    a Windows PDC / Active Directory


author: Paul Wouters <pwouters@redhat.com> - 1.3.1-13
changelog:
  - rhbz#929447 - Fix ipparam so ipv6-up does not fail (Michal Bruncko)
  - rhbz#850372 - Introduce new systemd-rpm macros in xl2tpd spec file
  - Use relro,pie for compiling
  - rhbz#947209 - Use openssl's MD5 function instead of private copy
    (so FIPS restrictions work)


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 1.4.01-4
changelog:
  - Add maven metadata
  - Few guidelines tweaks (buildroot, clean, defattr)
  - Versionless jars & javadocs


author: Orion Poplawski <orion@cora.nwra.com> - 1.4.01-5
changelog:
  - Add missing packages to manifest - javax.xml.stream, javax.xml.stream.events,
    javax.xml.stream.util, javax.xml.transform.stax (bug #743360)


author: Alexander Kurtakov <akurtako@redhat.com> 1:3.1.3-5
changelog:
  - Remove javax.xml.bind from osgi imports - it's part of the JVM now.
  - Drop the ws-jaxme dependency for the same reason.


author: Jens Petersen <petersen@redhat.com> - 0.11-3
changelog:
  - xmonad-gnome subpackage renamed to xmonad-mate
    since gnome-panel in f19 is gone
  - corresponding renamings from gnome to mate
  - forward-port xmonad-start arg from f16


author: Jens Petersen <petersen@redhat.com> - 0.11-7
changelog:
  - mate-panel requires mate-file-manager-schemas to run (see #1007219)
  - popup a zenity dialog for first-time users rather than manpage in terminal


author: Peter Hutterer <peter.hutterer@redhat.com> 7.7-3
changelog:
  - luit 1.1.1
  - oclock 1.0.3
  - xclock 1.0.6
  - xbiff 1.0.3
  - xpr 1.0.4
  - xcursorgen 1.0.5
  - xclipboard 1.1.2
  - xfontsel 1.0.4
  - xfd 1.1.1
  - xlogo 1.0.4
  - xvidtune 1.0.3


author: Peter Hutterer <peter.hutterer@redhat.com> 7.7-6
changelog:
  - Require xorg-x11-xbitmaps for xbiff (#474258)
  - fix rpmlint complaints
  - update sources to http sources, ftp fails too often


author: Adam Jackson <ajax@redhat.com> 2.21.9-1
changelog:
  - intel 2.21.9
  - New i-g-t snapshot
  - Drop useless symlinks from -devel
  - Repurpose -devel for intel-gen4{,dis}asm
  - Default to SNA in F20+


author: Adam Jackson <ajax@redhat.com> 0.6.0-7
changelog:
  - Add Obsoletes: for ast everywhere, and mga and cirrus in RHEL, since we
    have KMS drivers for them now.


author: Adam Jackson <ajax@redhat.com> 12.0.1-2
changelog:
  - vmware-12.0.1-vgahw.patch: Fix a different crash at start (#782995)
  - vmware-12.0.1-git.patch: Backport a garbage-free fix from git.


author: Peter Hutterer <peter.hutterer@redhat.com> 1:7.5-10
changelog:
  - Add the epoch to the Provides bdftruncate. bdftruncate had an epoch for
    years, make sure that stays alive


author: Peter Hutterer <peter.hutterer@redhat.com> 1:7.5-14
changelog:
  - mkfontscale 1.1.0
  - mkfontdir 1.0.7
  - bdftopcf 1.0.4
  - Document mkfontscale's -u/-U in the man page (#948841)


author: Peter Hutterer <peter.hutterer@redhat.com> 7.2-11
changelog:
  - Require xorg-x11-font-utils >= 7.2-11 for font-utils 1.1.0
  - Fix bashism in spec file (&>)
  - Remove perl hack for DEFAULT_FONTS_DIR, fixed upstream 
  - Remove perl and autoconf requirement.
  - Create %ghost files {misc|705dpi|...}/fonts.scale.
  - Drop fontdir alias patches
  - Update a few fonts (well, all of them)
      - encodings-1.0.3
      - font-adobe-100dpi-1.0.1
      - font-adobe-75dpi-1.0.1
      - font-adobe-utopia-100dpi-1.0.2
      - font-adobe-utopia-75dpi-1.0.2
      - font-adobe-utopia-type1-1.0.2
      - font-alias-1.0.2
      - font-arabic-misc-1.0.1
      - font-bh-100dpi-1.0.1
      - font-bh-75dpi-1.0.1
      - font-bh-lucidatypewriter-100dpi-1.0.1
      - font-bh-lucidatypewriter-75dpi-1.0.1
      - font-bitstream-100dpi-1.0.1
      - font-bitstream-75dpi-1.0.1
      - font-bitstream-type1-1.0.1
      - font-cronyx-cyrillic-1.0.1
      - font-cursor-misc-1.0.1
      - font-daewoo-misc-1.0.1
      - font-dec-misc-1.0.1
      - font-isas-misc-1.0.1
      - font-jis-misc-1.0.1
      - font-micro-misc-1.0.1
      - font-misc-cyrillic-1.0.1
      - font-misc-ethiopic-1.0.1
      - font-misc-misc-1.1.0
      - font-mutt-misc-1.0.1
      - font-schumacher-misc-1.1.0
      - font-screen-cyrillic-1.0.2
      - font-sony-misc-1.0.1
      - font-sun-misc-1.0.1
      - font-winitzki-cyrillic-1.0.1
      - font-xfree86-type1-1.0.2


author: Jerome Glisse <jglisse@redhat.com> 0.5.0-2.20130401git81aadb8
changelog:
  - Silence rpmlint warning about ldconfig
  - Only install libglamor.so in devel package.
  - Adding COPYING and README as doc


author: Jerome Glisse <jglisse@redhat.com> 0.5.0-3.20130401git81aadb8
changelog:
  - Remove comment rather than investigating Xorg mess as running ldconfig can't be harmfull.
  - Fix devel package dependency.


author: Peter Hutterer <peter.hutterer@redhat.com> 7.6-24
changelog:
  - bigregsproto 1.1.2
  - compositeproto 0.4.2
  - damageproto 1.2.1
  - fontsproto 2.1.2
  - inputproto 2.2
  - kbproto 1.0.6
  - recordproto 1.14.2
  - scrnsaverproto 1.2.2
  - xcmiscproto 1.2.2
  - xextproto 7.2.1


author: Peter Hutterer <peter.hutterer@redhat.com> 1.14.2-5
changelog:
  - Fix logspam when trying to free a non-existant grab.
  - Update touch patch to upstream version (from fdo #66720)
  - re-add xephyr resizable patch, got lost in rebase (#976995)


author: Peter Hutterer <peter.hutterer@redhat.com> 1.14.2-6
changelog:
  - Add new version of the resolution-based scaling patch - scale y down
    instead of x up. That gives almost the same behaviour as current
    synaptics. Drop the synaptics quirk, this needs to be now removed from the
    driver.


author: Peter Hutterer <peter.hutterer@redhat.com> 1.14.2-7
changelog:
  - Fix erroneous valuator 1 coordinate when an absolute device in relative
    mode doesn't send y coordinates.


author: Peter Hutterer <peter.hutterer@redhat.com> 1.14.2-9
changelog:
  - Fix active touch grabs, second touchpoint didn't get sent to client
  - Fix version mismatch for XI 2.2+ clients (where a library supports > 2.2
    but another version than the originally requested one).


author: Adam Jackson <ajax@redhat.com> 7.7-1
changelog:
  - rgb 1.0.5
  - xsessreg 1.0.8
  - xgamma 1.0.5
  - xhost 1.0.5
  - xmodmap 1.0.7
  - xsetroot 1.1.1
  - xstdcmap 1.0.3


author: Kevin Fenzi <kevin@scrye.com> 1.3.2-7
changelog:
  - Add patch to not switch tty's, so systemd-logind works right with startx. 
  - Partially Fixes bug #806491


author: Peter Hutterer <peter.hutterer@redhat.com> 7.7-4
changelog:
  - xkbcomp: Fix generation of XKB directory listing, missing reset on file
    handler caused parse errors and incomplete directory listings


author: Christoph Wickert <cwickert@fedoraproject.org> - 4.1-1
changelog:
  - Update to 4.1
  - Remove obsolete GTK_WINDOW_TOPLEVEL.patch
  - Add patch to compile with recent glibc versions


author: Tom Callaway <spot@fedoraproject.org> - 1:3.02-17
changelog:
  - Added pdftoppm for el5 or older, since it is not included in poppler-utils on el5
  - Thanks to Ingvar Hagelund.


author: Stanislav Ochotnicky <sochotnicky@redhat.com> - 0:1.1.3.8-4
changelog:
  - Fix pom filenames (Resolves rhbz#655829)
  - Changes according to new guidelines (versionless jars)
  - Fix few packaging problems (post/postun deps)


author: Nils Philippsen <nils@redhat.com> - 0.998-21
changelog:
  - don't dereference NULL preview objects when quitting (#963696)
  - fix vendor tag logic in a prettier way


author: Mamoru TASAKA <mtasaka@fedoraproject.org> - 1:5.21-3
changelog:
  - Fix the iteration number for pentomino mode in polyominoes
    (bug 954077)
  - Convert maxlife option from 5.20- for fireworkx (bug 953916)
  - Fix broken Name entry for desktop file of GL hacks (bug 953558)
  - Add OnlyShownIn entry for desktop files (bug 953558)


author: Mamoru TASAKA <mtasaka@fedoraproject.org> - 1:5.21-6
changelog:
  - F-19+: Kill dependency for base on extras, gl-extras subpackage
  - Fix segfault on pacman (bug 964575)


author: Kevin Kofler <Kevin@tigcc.ticalc.org> - 0.12.3-1
changelog:
  - update to 0.12.3
  - drop upstreamed immodule patch
  - rewrite Net/ThemeName handling: set it based on .gtkrc-2.0-kde4 (kcm-gtk)


author: Miroslav Lichvar <mlichvar@redhat.com> 283-1
changelog:
  - update to 283
  - install icon to hicolor theme and use it in desktop file (#804279)
  - use new configure options to set some resource defaults (#819588)
  - fix URL (#856957)
  - remove obsolete macros


author: Dominik Mierzejewski <rpm at greysector.net> - 1.2.0-1
changelog:
  - 1.2.0
  - drop upstreamed noexec stack patch
  - BR recent nasm instead of yasm
  - licence seems to be just GPLv2+
  - move TODO from main to -devel doc
  - update summary and description
  - small spec file fixes


author: Daniel P. Berrange <berrange@redhat.com> - 2.0.4-1
changelog:
  - Update to 2.0.4 release (rhbz #845777)
  - Fix License tag to reflect change in 2.0.0 series from BSD to ISC


author: Nicolas Mailhot <nicolas.mailhot at laposte.net>
changelog:
  - 20100514-1
  — Update to latest upstream release
  — Switch licensing to OFL (thanks Google)
  — Alias the author's non-free derivatives (FF Kava Pro & FF Kava OT)


author: Kalev Lember <kalevlember@gmail.com> - 1:3.8.1-3
changelog:
  - Make yelp-libs dep arch-specific, thanks to Michael Schwendt (#967180)
  - Don't create empty /usr/share/gnome/help directory: this should be owned by
    individual packages that install files in there (#964421)
  - Use configure --disable-static instead of removing the static .a afterwards


author: - Maxim Burgerhout <wzzrd@fedoraproject.org> - 1.8.0-1
changelog:
  - Update to 1.8.0:
  - Support for yk_challenge_response, Yubikey 2.3, bugfixes and more
  - Drop bigendian patch, is now in upstream source


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.4.3-103
changelog:
  - Added debuglevel option to yum-cron.conf BZ 873428, 982088
  - RepoMD: support loading/dumping of <delta>s.


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.4.3-104
changelog:
  - Update to latest HEAD.
  - yum-cron: use [base] section
  - yum-cron: fix the download but don't appy updates case. BZ 983076
  - group install/update: handle "No Groups Available" exception. BZ 983010
  - misc.decompress(): handle OSError, too. BZ 989948


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.4.3-105
changelog:
  - Update to latest HEAD.
  - yum-cron: smtp-compliant email_from default. BZ 982696
  - Add a "--disableincludes" option to yum. BZ 911422
  - yum-cron: override the default stdout codec.  BZ 992797
  - docs: fix spelling. BZ 991702
  - fix file:// repository && downloadonly. BZ 903294, BZ 993567


author: Zdenek Pavlas <zpavlas@redhat.com> - 3.4.3-106
changelog:
  - Update to latest HEAD.
  - deltarpm: _wait(block=True) should not wait for all running jobs. BZ 991694
  - make mdpolicy=group:small default, add group and pkgtags. BZ 989231


author: James Antill <james at fedoraproject.org> - 3.4.3-107
changelog:
  - Update to latest HEAD.
  - Pass requirement to compare_proviers so we can use provides version compare.
  - Show conf. file in yum-cron error message.
  - Add mark convert messages.
  - Fix logging level regression, -d9 works again.
  - Override users umask for groups files, so users can read it. BZ 982361.
  - Fix downgrade keeping .reason, note that remove+install doesn't. BZ 961938.
  - Inherit reason from install package into txmbr. BZ BZ 961938.


author: James Antill <james at fedoraproject.org> - 3.4.3-108
changelog:
  - Update to latest HEAD.
  - Use new comps. mock objects to re-integrate group removal. BZ 996866.
  - Add "weak" comps. groups, for installed groups.
  - Add msg. to help users deal with RepoError failures. BZ 867389.
  - Give msgs about install/trans. obsoletes a higher priority. BZ 991080.
  - waitForLock() raises YumBaseError. BZ 1001154.


author: James Antill <james at fedoraproject.org> - 3.4.3-109
changelog:
  - Update to latest HEAD.
  - update /etc/yum-cron-hourly.conf. BZ 1002623
  - Tweak y-c-t and history redo msg. BZ 974576.
  - docs: $arch does not map 1:1 to uname(2) arch. BZ 1003554
  - checkMD: re-check when xattr matches but size==0. BZ 1002494


author: James Antill <james at fedoraproject.org> - 3.4.3-110
changelog:
  - Update to latest HEAD.
  - Add cache check to repolist, using "!". Document repoinfo.
  - Add epoch to updateinfo xml output.
  - Add missing translation hooks for ignored -c option message.
  - Try to smooth out the edge cases for cacheReq not ever updating data.


author: James Antill <james at fedoraproject.org> - 3.4.3-111
changelog:
  - Update to latest HEAD.
  - More reliable po.localpath file:// URL test. BZ 1004089
  - Disable drpms for local repositories. BZ 1007097
  - docs: fix formatting of "yum swap" examples. BZ 1009154
  - Move disableplugin checks to before we load the conf/module
  - Set repo_error.repo attr also when filelists DL fails
  - Fix the "repo failed" message
  - docs: update "yum check" extra args description. BZ 1014993
  - unlink_f(): handle ENOENT, EPERM, EACCES, EROFS. BZ 1015647, BZ 975619


author: Seth Vidal <skvidal at fedoraproject.org> - 1.1.2-14
changelog:
  - apply latest patches from upstream - consolidate into one big patch
  - test before a 1.1.3 from upstream


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-9
changelog:
  - Update to latest HEAD.
  - Added pluginhome define to get rid of hardcoded paths
  - Fix yum-NetworkManager-dispatcher description, BZ 894729
  - reposync should lock. BZ 880722
  - Initialize exit_code correctly.  BZ 882536


author: James Antill <james@fedoraproject.org> - 1.1.31-11
changelog:
  - Update to latest HEAD.
  - FS snapshot fixes, and thin provisioning support.
  - search-quiet for yumdb.


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-13
changelog:
  - Update to latest HEAD
  - versionlock add: Skip packages already locked.
  - versionlock delete: Match all names, not just envra.
  - Allow --old=/foo urls for repodiff.
  - Don't check timestamps for repofrompath repos. BZ 880944
  - Output couldn't find a pkg. for 'foo'. BZ 838158


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-15
changelog:
  - Update to latest HEAD
  - debuginfo-install: handle YumBaseError
  - fs-snapshot: "dmsetup -o" workaround.  BZ 954358, BZ 949569
  - tmprepo: avoid spaces in repoid. BZ 965806
  - repoquery: add cachedir locking. BZ 969776
  - Fix a bug in Modified/Upgraded/Downgraded output. BZ 819502


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-16
changelog:
  - Update to latest HEAD
  - Fix pacakge => package typos
  - docs: Add missing man page short descriptions
  - docs: Escape dashes in command-line options
  - docs: Add missing man pages for all yum-utils
  - Add --show-duplicates to repoquery manpage. BZ 975565
  - yum-complete-transaction: unlock yum.pid. BZ 984119
  - sanitize repoquery --repofrompath. BZ 988140
  - yum changelog: implicit since=all. BZ 961782
  - repoquery: retry doLock() BZ 988223


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-17
changelog:
  - Update to latest HEAD
  - Use new findRepos() API for yum-config-manager. BZ 971599
  - repoquery: add --installroot option. BZ 988429
  - repoquery: obey conf.exit_on_lock
  - reposync: fix a copy-paste error. BZ 994514


author: Zdenek Pavlas <zpavlas@redhat.com> - 1.1.31-18
changelog:
  - Update to latest HEAD
  - repoquery: handle Yum exceptions on .conf setup. BZ 996027
  - repo-rss: non-ASCII fix, sorting
  - Add repoquery --installroot completion.
  - Add --nogroups and --noplugins options to verifytree.
  - yumdownloader: make --destdir less of a hack. BZ 1004089
  - fs-snapshot: btrfsctl is obsolete, use btrfs. BZ 1010974
  - yum-config-manager: fix --add-repo. BZ 984216


author: Tim Lauridsen <timlau@fedoraproject.org> 3.0.7-2
changelog:
  - Install another .desktop file with mimetype for local .rpm install
  - update desktop database post install & post uninstall


author: kwizart < kwizart at gmail.com > - 1.3-4
changelog:
  - Update to snap 2007-03-19 but still no changes from Dec 26 2006.
  - Drop devel is not usefull
  - Use patch for sudo and zd1211b install
  - Fix description/summary


author: Kalev Lember <kalevlember@gmail.com> - 3.4.0-1
changelog:
  - Update to 3.4.0
  - Don't run autoreconf and intltoolize in the spec file; the tarball should be
    good enough


author: Thomas Spura <tomspur@fedoraproject.org> - 3.2.2-2
changelog:
  - add bcond_without pgm macro (Jose Pedro Oliveira, #867182)
  - remove bundled pgm
  - add zeromq-3 git repository


author: Karel Klic <kklic@redhat.com> - 3.0-1
changelog:
  - New upstream version
  - Removed zip23.patch, because ZMEM is not used anyway
  - Removed zip-2.31-install.patch, problem solved in upstream
  - Removed zip23-umask.patch, upstream uses mkstemp which solves the problem
  - Removed zip-2.31-near-4GB.patch, because upstream version
    handles large files well
  - Removed zip-2.31-configure.patch, configure is better in the current version
  - Removed zip-2.3-sf.patch, the error message doesn't exist in upstream anymore
  - Removed zip-2.31-umask_mode.patch, which fixes also removed near-4GB patch
  - Updated zip-2.31-time.patch for zip 3.0
  - Updated exec-shield.patch for zip 3.0
  - Updated zip-2.3-currdir.patch for zip 3.0


